trix
11-20-2012, 11:50 AM
ok so I had a lot of bad shit happen in the past couple of weeks that has me selling both my toys, and one of them I JUST traded for my wrx. Both cars run great.
my contact info is 516-320-179five
or my email [email protected]
I will also repeat the contact info at the bottom
so for the first one this is the mods list I had from the original owner
1991 Nissan 240sx SE 5-Speed Hatchback
Exterior:
Fresh Nissan Factory White Re-Paint - $2,000
Japanese 180sx Type-X Kouki Tail Light Set with Center Garnish - $500
Japanese 180sx Type-X Kouki Rear Wing - $200
Bings.ca Front Aero Lip - $225
Lower Driving Lights - $180
HID Headlight Kit -$110
Interior:
NRG Short Hub and Quick Release (will come separate) - $129 $150 = $280
Japanese 180sx Type-X Kouki Front and Rear Seats - $400
Nismo Shift Knob - $60
Audio:
Custom Subwoofer & Amplifier Professionally installed by Audio Arsenal of Watertown NY - $300
JVC KD-R610 USB/CD Receiver w/ Front AUX, iPod, Radio, & Bluetooth - $200
Electronics:
AEM Engine Management System Series 1 Plus & Play - $1,800
AEM TruBoost Gauge - $318
AEM Voltemeter Gauge - $108
AEM UEGO Air/Fuel Ratio Gauge - $210
Wheels & Tires: (full set with tires $1,250)
XXR 527 - Fronts: 17x8.25 +25 Nexen N7000(215/45)
Rears: 17x9.75 +25 Nexen N7000 (225/45)
Professionally Powder Coated 'Candy Apple Green - $125 per wheel = $500
Engine: Total cost ($10,000 with Labor)
ECR33 RB25DET version 2 - $1,800
Isis 3" cat back exhaust - $300
McKinney Motorsports Motor Mounts - $450
McKinney Motorsports Transmission Mount - $60
Custom RD Fabs Downpipe - $300
Walbro 255lph Fuel Pump - $85
CX Racing High Flow Radiator - $130
ISIS Intake Manifold - $400
Garrett Gt3076r turbo - $1,386
Injector Dynamics 1000cc Injectors - $720
Carbon Fiber Coil Pack Cover - $150
Carbon Fiber Timing Belt Cover - $150
SARD Fuel Pressure Regulator - $300
Tial 38mm External Wastegate - $250
HKS SSQV III Blow Off Valve - $480
Precision Turbo & Engine Intercooler - $400
2.5in Intercooler Piping Kit - $140
Driveline/Transmission:
ACT HD Stage 5, 4-puck solid hub Clutch - $100
Custom Made 1 Piece Aluminum DriveShaft -$450
Nismo Slave Cylinder - $38
Brand New Nissan OEM Brake master Cylinder - $100
Brand New Nissan OEM Clutch Master Cylinder - $17
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-11-16_21-31-36_709_zps68913cd0.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-11-16_21-31-44_502_zps53562dd2.jpg
there are also videos on youtube channel hackbarthja
I want 13k obo for that car no frame rot/damage or anything
THE BAD RIGHT OFF THE BAT:
1)CAR DOES HAVE FRAME RAIL ROT IN THE NORMAL AREA ON THE BOTTOM (ONLY PLACE), CAN BE FIXED.
2)SMALL CRACK IN BOTTOM OF WINDSHEILD
Now that, that is out of the way I can start.
3500 firm NO TRADES I JUST BOUGHT ANOTHER CAR.
1989 240sx burgondy red
100k miles on body
around 60k on the motor
stock interior
fairly clean
red top sr20det
new coil packs
bkr8eix ngk plugs
big 3 inch core front mount
no power steering
welded diff
2.5 inch exhaust
greddy blow off valve
kyb struts
skunk 2 springs
walboro 255 fuel pump
koyo rad
samco hoses
brand new battery, now location in trunk
brand new braks front and rear
brand new fuel filter
SAFC1
perrin inline boost controller
autometer boost gauge
all new oil/filters synthetic only
big oil catch can
touge purple anodized pulleys
tomei rocker arm stoppers
thats all I can remember as of now, I will keep adding more info as I remember all the mods I have done to the car.
I will throw in an extra sr tranny and exeedy clutch, as well as front and rear suspension adjustable parts.
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-13-18_585_zpsdd34d593.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-12-35_493_zps8791ecf9.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-12-27_723_zps731810da.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-12-16_12_zpsb6b4d444.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-13-28_31_zps60f54ff6.jpg
please contact me at 516-320-179five
or my email [email protected]
my contact info is 516-320-179five
or my email [email protected]
I will also repeat the contact info at the bottom
so for the first one this is the mods list I had from the original owner
1991 Nissan 240sx SE 5-Speed Hatchback
Exterior:
Fresh Nissan Factory White Re-Paint - $2,000
Japanese 180sx Type-X Kouki Tail Light Set with Center Garnish - $500
Japanese 180sx Type-X Kouki Rear Wing - $200
Bings.ca Front Aero Lip - $225
Lower Driving Lights - $180
HID Headlight Kit -$110
Interior:
NRG Short Hub and Quick Release (will come separate) - $129 $150 = $280
Japanese 180sx Type-X Kouki Front and Rear Seats - $400
Nismo Shift Knob - $60
Audio:
Custom Subwoofer & Amplifier Professionally installed by Audio Arsenal of Watertown NY - $300
JVC KD-R610 USB/CD Receiver w/ Front AUX, iPod, Radio, & Bluetooth - $200
Electronics:
AEM Engine Management System Series 1 Plus & Play - $1,800
AEM TruBoost Gauge - $318
AEM Voltemeter Gauge - $108
AEM UEGO Air/Fuel Ratio Gauge - $210
Wheels & Tires: (full set with tires $1,250)
XXR 527 - Fronts: 17x8.25 +25 Nexen N7000(215/45)
Rears: 17x9.75 +25 Nexen N7000 (225/45)
Professionally Powder Coated 'Candy Apple Green - $125 per wheel = $500
Engine: Total cost ($10,000 with Labor)
ECR33 RB25DET version 2 - $1,800
Isis 3" cat back exhaust - $300
McKinney Motorsports Motor Mounts - $450
McKinney Motorsports Transmission Mount - $60
Custom RD Fabs Downpipe - $300
Walbro 255lph Fuel Pump - $85
CX Racing High Flow Radiator - $130
ISIS Intake Manifold - $400
Garrett Gt3076r turbo - $1,386
Injector Dynamics 1000cc Injectors - $720
Carbon Fiber Coil Pack Cover - $150
Carbon Fiber Timing Belt Cover - $150
SARD Fuel Pressure Regulator - $300
Tial 38mm External Wastegate - $250
HKS SSQV III Blow Off Valve - $480
Precision Turbo & Engine Intercooler - $400
2.5in Intercooler Piping Kit - $140
Driveline/Transmission:
ACT HD Stage 5, 4-puck solid hub Clutch - $100
Custom Made 1 Piece Aluminum DriveShaft -$450
Nismo Slave Cylinder - $38
Brand New Nissan OEM Brake master Cylinder - $100
Brand New Nissan OEM Clutch Master Cylinder - $17
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-11-16_21-31-36_709_zps68913cd0.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-11-16_21-31-44_502_zps53562dd2.jpg
there are also videos on youtube channel hackbarthja
I want 13k obo for that car no frame rot/damage or anything
THE BAD RIGHT OFF THE BAT:
1)CAR DOES HAVE FRAME RAIL ROT IN THE NORMAL AREA ON THE BOTTOM (ONLY PLACE), CAN BE FIXED.
2)SMALL CRACK IN BOTTOM OF WINDSHEILD
Now that, that is out of the way I can start.
3500 firm NO TRADES I JUST BOUGHT ANOTHER CAR.
1989 240sx burgondy red
100k miles on body
around 60k on the motor
stock interior
fairly clean
red top sr20det
new coil packs
bkr8eix ngk plugs
big 3 inch core front mount
no power steering
welded diff
2.5 inch exhaust
greddy blow off valve
kyb struts
skunk 2 springs
walboro 255 fuel pump
koyo rad
samco hoses
brand new battery, now location in trunk
brand new braks front and rear
brand new fuel filter
SAFC1
perrin inline boost controller
autometer boost gauge
all new oil/filters synthetic only
big oil catch can
touge purple anodized pulleys
tomei rocker arm stoppers
thats all I can remember as of now, I will keep adding more info as I remember all the mods I have done to the car.
I will throw in an extra sr tranny and exeedy clutch, as well as front and rear suspension adjustable parts.
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-13-18_585_zpsdd34d593.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-12-35_493_zps8791ecf9.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-12-27_723_zps731810da.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-12-16_12_zpsb6b4d444.jpg
http://i1278.photobucket.com/albums/y508/michael-timothy-thomas/2012-10-18_10-13-28_31_zps60f54ff6.jpg
please contact me at 516-320-179five
or my email [email protected]