hellraiser
11-17-2012, 01:25 AM
Pics will be up shortly...If you need a particular pic quickly lmk and I will do my best. All parts are located in Vista and I can be reached by text 760-four-twenty-634seven All prices are negotiable
Have a bunch of parts for sale
Drift Freaq motor mounts SOLD
Nismo slave, lightly used, works perfect, no leaks $120
B&M (KA or SR) short shifter in great shape 140 obo
KA whitebunny setup (clutch needs to be replaced, the pressure plate is shotty.) $40
Includes pressure plate, clutch disk and flywheel that is in useable shape
Set up is known to hold 300 hp and 300 ft lbs of torque at least depending on the pressure plate.
SR bellhousing $45
SR or KA transmission (one of the bearings is gone, I am selling this as a rebuild only...$50
S13 Godspeed sway bars front a rear $100+stock front sway and D brackets
(Front sways definitely need new bushings)
S13 Ghetto Nismo style power brace GONE (TRADED)
(This is two tension braces with a square bar welded between them, it
is ugly but very solid, the bottom of the tension braces are boxed)
S13 subframe $60
S13 Stock exhaust $35
S13 Rear lower control arms $50
S14 (gotta verify) rear brakes with relatively new pads in good shape $40
S14 5 lug rotors bought these brand new and have less than 5k miles $30
s14 Open diff $20 obo
S14 knuckles with PBM high angle kit instilled $220
(This price does not include anything involved in the FLCA, I paid
200 for the kit + 40 for the welding + cost of the knuckle so save
yourself some money, grind off as much of your bumpstop as you
want to get the right angle and be set.)
2003 350z:
Battery cover in good shape $10
Strut tower bar $40
Auto Ecu $60
What I am looking for:
SPL offset mounts for the S14 subframe swap
Rear z32 conversion lines
S15 diff with ABS sensor
Have a bunch of parts for sale
Drift Freaq motor mounts SOLD
Nismo slave, lightly used, works perfect, no leaks $120
B&M (KA or SR) short shifter in great shape 140 obo
KA whitebunny setup (clutch needs to be replaced, the pressure plate is shotty.) $40
Includes pressure plate, clutch disk and flywheel that is in useable shape
Set up is known to hold 300 hp and 300 ft lbs of torque at least depending on the pressure plate.
SR bellhousing $45
SR or KA transmission (one of the bearings is gone, I am selling this as a rebuild only...$50
S13 Godspeed sway bars front a rear $100+stock front sway and D brackets
(Front sways definitely need new bushings)
S13 Ghetto Nismo style power brace GONE (TRADED)
(This is two tension braces with a square bar welded between them, it
is ugly but very solid, the bottom of the tension braces are boxed)
S13 subframe $60
S13 Stock exhaust $35
S13 Rear lower control arms $50
S14 (gotta verify) rear brakes with relatively new pads in good shape $40
S14 5 lug rotors bought these brand new and have less than 5k miles $30
s14 Open diff $20 obo
S14 knuckles with PBM high angle kit instilled $220
(This price does not include anything involved in the FLCA, I paid
200 for the kit + 40 for the welding + cost of the knuckle so save
yourself some money, grind off as much of your bumpstop as you
want to get the right angle and be set.)
2003 350z:
Battery cover in good shape $10
Strut tower bar $40
Auto Ecu $60
What I am looking for:
SPL offset mounts for the S14 subframe swap
Rear z32 conversion lines
S15 diff with ABS sensor