2jdm4you
11-14-2012, 07:07 PM
Sup zilvians, so I'm looking to make some room in my garage and to pay some stuff off and school. So I part some stuff out and possibly trade it to piss my step dad off more. Number will be at the bottom if there's something you want to ask, just pm me or text it. I'm located in Crown Point, Indiana, and will ship smaller stuff, but bigger stuff is iffy unless you cover it all.
I have a sr20det that I was building to put into my car, but I'm deciding to go another way. I won't take being low balled, and no I wont part one thing out. The only thing I will part out is the 5 speed swap including driveshaft. Nothing else. This car, on a good tune was projected to hit mid 300 wheel horsepower. This is a steal for what it would cost to buy a full swap else where. I won't ship this, you will have to come get it. I will take trades like a full ka swap + cash, or a ka-t swap, vh swap, wheels with sexy size and offsets lots of dish, running cars, you know that good stuff. Now some dets:
sr20det redtop 40k miles with harness and ecu, non tampered still good to run
oem 5 speed trans with 2 piece non abs stock driveshaft
Oem 5 speed clutch pedal with all hard lines and mc
oem 5 speed brake pedal
AEM TruBoost set up
S15 turbo (can get part numbers off tag for you)
hks adjustable actuator
isis stainless steel turbo lines
isis tubular manifold
isis screamer O2 elbow
isis downpipe
isis oversized oilpan
megan pulley set
isis intake w/ stock tb installed; can include witha q45 90mm tb
q45 n60 maf with pigtails
jgy fuel rail with rc 750cc injectors with pigtails
3 inch big ass intercooler, looks to be isis as well with hot pipe, needs isis cold pipe or cut the old one and use silicon piping included
emissions and a/c deleted
also some other random things I dont want to keep with the car, I'm sure theres more but it's late and im too tired to think.
What it needs is the heater hoses in back hooked up the fuel rail hooked up, a bov, and a tune if you want to run it right and not blow it up, and vacuum, few sensors, and fuel lines hooked up. I have silicon couplers and random piping to go with as well. As I said I would prefer not to ship this. $2500
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1581.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1582.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/240sx%20parts%20for%20sale/IMG_1579.jpg
Next I got some Varrstoen E.S.1.1.1, I was gonna run these on the track, but seasons over and now they just take up space.
Specs are universal 4 lug, 16x8 +0 all around, which is a rare offset to buy these in. Tires are practically brand new, less than 500 miles, Kuhmo Ecstas 215/55/16. $600
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1532.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1534.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1533.jpg
Next up, I have a aem true boost, complete setup, no box lost it along the way. It comes with the 5 pin connector harness main one, no other bezels or faceplate, the boost solenoid with fittings, pretty much everything but the optional harness and the faceplates and bezels. $225
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1586.jpg
Next a pair of 38mm 4x114.3 spacers with hubcentric rings in it. Don't know the brand but they are great, have used them on my car for the track. $50
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1589.jpg
Next up, a q45 90mm throttle body, as you see got the pigtails. Throw me an offer
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1587.jpg
Next, I got a ford lighting maf for a big power application. It doesn't have pigtails but I'm sure you can pic em up somewhere. Offer
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1588.jpg
Finally, I got a 91 hatch shell with title, needs lots of love, but almost no rust! The windshield was replaced but broke so it doesnt have one. It was once a drift car but was parted out somewhat. No driver seat fenders, windshield, drivetrain, cut for overs, needs a drivers side lock mechanism, but the shell has a full welded cage. Its a base model, no power anything, will come with pignose front bumper, oem hood, and stock rear bumper. It'd made a great missle, or something to track, or cut the cage out and scrap it. I don't care, I don't need it anymore. $500
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/240sx%20parts%20for%20sale/IMG_1577.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/3K63M43Nf5L75E75M9carae71146bfdfb1530.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1521.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1525.jpg
Pricewise, throw me an offer and well work from there. If you lowball, I won't work with you, plain as that. PM me or text me at 219-682-5851, anytime. If I don't reply I'm either at work or school, and I will get back to you. If you call, I WON'T ANSWER!!!, don't answer numbers I don't know, so text me.
Thanks for looking, and bump for viewing!
I have a sr20det that I was building to put into my car, but I'm deciding to go another way. I won't take being low balled, and no I wont part one thing out. The only thing I will part out is the 5 speed swap including driveshaft. Nothing else. This car, on a good tune was projected to hit mid 300 wheel horsepower. This is a steal for what it would cost to buy a full swap else where. I won't ship this, you will have to come get it. I will take trades like a full ka swap + cash, or a ka-t swap, vh swap, wheels with sexy size and offsets lots of dish, running cars, you know that good stuff. Now some dets:
sr20det redtop 40k miles with harness and ecu, non tampered still good to run
oem 5 speed trans with 2 piece non abs stock driveshaft
Oem 5 speed clutch pedal with all hard lines and mc
oem 5 speed brake pedal
AEM TruBoost set up
S15 turbo (can get part numbers off tag for you)
hks adjustable actuator
isis stainless steel turbo lines
isis tubular manifold
isis screamer O2 elbow
isis downpipe
isis oversized oilpan
megan pulley set
isis intake w/ stock tb installed; can include witha q45 90mm tb
q45 n60 maf with pigtails
jgy fuel rail with rc 750cc injectors with pigtails
3 inch big ass intercooler, looks to be isis as well with hot pipe, needs isis cold pipe or cut the old one and use silicon piping included
emissions and a/c deleted
also some other random things I dont want to keep with the car, I'm sure theres more but it's late and im too tired to think.
What it needs is the heater hoses in back hooked up the fuel rail hooked up, a bov, and a tune if you want to run it right and not blow it up, and vacuum, few sensors, and fuel lines hooked up. I have silicon couplers and random piping to go with as well. As I said I would prefer not to ship this. $2500
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1581.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1582.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/240sx%20parts%20for%20sale/IMG_1579.jpg
Next I got some Varrstoen E.S.1.1.1, I was gonna run these on the track, but seasons over and now they just take up space.
Specs are universal 4 lug, 16x8 +0 all around, which is a rare offset to buy these in. Tires are practically brand new, less than 500 miles, Kuhmo Ecstas 215/55/16. $600
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1532.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1534.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1533.jpg
Next up, I have a aem true boost, complete setup, no box lost it along the way. It comes with the 5 pin connector harness main one, no other bezels or faceplate, the boost solenoid with fittings, pretty much everything but the optional harness and the faceplates and bezels. $225
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1586.jpg
Next a pair of 38mm 4x114.3 spacers with hubcentric rings in it. Don't know the brand but they are great, have used them on my car for the track. $50
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1589.jpg
Next up, a q45 90mm throttle body, as you see got the pigtails. Throw me an offer
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1587.jpg
Next, I got a ford lighting maf for a big power application. It doesn't have pigtails but I'm sure you can pic em up somewhere. Offer
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1588.jpg
Finally, I got a 91 hatch shell with title, needs lots of love, but almost no rust! The windshield was replaced but broke so it doesnt have one. It was once a drift car but was parted out somewhat. No driver seat fenders, windshield, drivetrain, cut for overs, needs a drivers side lock mechanism, but the shell has a full welded cage. Its a base model, no power anything, will come with pignose front bumper, oem hood, and stock rear bumper. It'd made a great missle, or something to track, or cut the cage out and scrap it. I don't care, I don't need it anymore. $500
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/240sx%20parts%20for%20sale/IMG_1577.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/3K63M43Nf5L75E75M9carae71146bfdfb1530.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1521.jpg
http://i458.photobucket.com/albums/qq307/PANCK4KEFLIPPER69/IMG_1525.jpg
Pricewise, throw me an offer and well work from there. If you lowball, I won't work with you, plain as that. PM me or text me at 219-682-5851, anytime. If I don't reply I'm either at work or school, and I will get back to you. If you call, I WON'T ANSWER!!!, don't answer numbers I don't know, so text me.
Thanks for looking, and bump for viewing!