hollerjeet
11-08-2012, 08:15 PM
hey i got a 97 240sx. it was a auto so i converted it to 5 speed (using a 5 speed ecu) it has a 91 ka in it but i swapped over all the components from the original motor. the tranny harness is the automatic one and the engine harness is also oem. the car runs fine, starts fine. but i keep getting a cel. when i pull it, its always P0335 which is the crank position sensor circuit malfunction. as soon as i clear it, it comes back. i already replaced the sensor on the tranny bell housing. ( i am using a s13 tranny but ive drilled out the hole and compensated for the rise using a washer). i have a fidnaza flywheel.
the car was slammed so the harness that runs in the driver fender well is a little exposed, nothing completely damaged. the tachometer also does not work. but everything else on the cluster works fine.
the car was slammed so the harness that runs in the driver fender well is a little exposed, nothing completely damaged. the tachometer also does not work. but everything else on the cluster works fine.