XRP AN Fittings and Plumbing

[Broadfield]

http://images58.fotki.com/v154/photos/4/47612/220584/XRPZilvia-vi.jpg

XRP product is widely used by professional race teams, ARCA, NASCAR, NHRA etc. They have a vast catalog that you can take a look at below:

*Download XRP Catalog Here* (http://www.xrp.com/xrp_catalog.pdf)

*Download XRP New Products Catalog Here* (http://www.xrp.com/xrp_new_products.pdf)



Please post if you have any questions on the product at all. If you would like to place an order or just want a quote then please email me with XRP part #'s attained from the catalog above:

[email protected]

Note: XRP has nearly 4500 SKUs, so I don't bother trying to stock the product. I typically place an order with them sometime every week, so please keep that time frame in mind when ordering. Once I place the order, it takes 4 business days to get to me. I will then turn around and ship it out to you the very next day. So far this has worked out great and none of my customers have had any complaints.

XRP offers most hose ends in the following colors:

Red/blue combo
Titanium/black combo
Black
Super Nickel


They offer multiple hose ends:

Push-on hose ends
The standard AN fitting hose end everyone is accustom to in non-swivel and double-swivel/triple seal with patented nipple and cutter design
The standard AN fitting hose end with patented nipple and cutter design with clamshell fastener end
Crimp on hose end with the standard nut end or clamshell fastener end
Nickel plated reusable steel power steering hose ends
Nickle plated reusable steel brake hose ends
Nickle plated reusable steel o-ring pilot A/C hose ends


They offer multiple hose materials:

NHRA accepted pushlock hose
Braided stainless
NHRA accepted braided nylon
NHRA accepted braided Nomex
NHRA accepted braided Nomex with Hypalon coating
High pressure power steering hose in black or blue
High pressure braided stainless A/C hose
High pressure braided stainless PTFE brake hose. -3 Also available in many custom colors


Beyond this XRP offers a full lineup of:

Inline oil and fuel filters
Power steering hose and fittings
Brake hose and fittings
A/C lines and fittings
Air jacks
Plus thousands of other items

[Broadfield]

lookin to redo my current setup of -8 and -4 as well as -6 in braided black with nickel and black ends. does the hose come in 12ft rolls or do u just sell by the ft? also what is the pricing on -90s in each of those sizes. swivel and non swivel

Yeah, if you want to PM me your email, I'll get that quote over to you within 24hrs.

[s14skyvia]

i will measure up some distance in the bay need some line for my relocation setup

[Broadfield]

i will measure up some distance in the bay need some line for my relocation setup

Nice, let me know.

[PureRush]

Broadfield would it be ok to replace my clutch line with these fittings and lines or would it be better to use the stock hardlines? I'm concerned about the lines flexing or expanding since its a hydraulic circuit. To be specific I'm replacing the line from the master to the slave. Thanks

[Broadfield]

Broadfield would it be ok to replace my clutch line with these fittings and lines or would it be better to use the stock hardlines? I'm concerned about the lines flexing or expanding since its a hydraulic circuit. To be specific I'm replacing the line from the master to the slave. Thanks

Yep, you can use their high pressure PTFE braided stainless hose made for brake and clutch lines. The hose ends start on page 54 of the catalog and the hose starts on page 56. Please let me know if you have any questions or need pricing.

[PureRush]

How much would a basic setup for -20 AN fittings for my cooling. I need 3 aluminum weld on fittings and 1 steel weld on fitting. I know I'll need to use around 3 feet of hose but in not sure what turns ill need. I'm basically making my setup like yours but not with the baller clamshell fittings. Pm me a price for a basic setup

[Broadfield]

How much would a basic setup for -20 AN fittings for my cooling. I need 3 aluminum weld on fittings and 1 steel weld on fitting. I know I'll need to use around 3 feet of hose but in not sure what turns ill need. I'm basically making my setup like yours but not with the baller clamshell fittings. Pm me a price for a basic setup

First off I need your email so I can send you a quote... also your full name.

The hose ends greatly vary in price depending on if you need straight or an angled. Do you know what you will need or do you just want me to quote on a straight and a 90 degree and then you can add it up later? Also, do you want braided nylon or braided stainless?... price varies on hose type. What color of hose end do you want?.. price varies on color.

[PureRush]

First off I need your email so I can send you a quote... also your full name.

The hose ends greatly vary in price depending on if you need straight or an angled. Do you know what you will need or do you just want me to quote on a straight and a 90 degree and then you can add it up later? Also, do you want braided nylon or braided stainless?... price varies on hose type. What color of hose end do you want?.. price varies on color.

I have the catalog downloaded on my computer at home. I'll look through the catalog and tell you what I need specifically. Gonna pm you my email so just shoot me an email

[Broadfield]

I have the catalog downloaded on my computer at home. I'll look through the catalog and tell you what I need specifically. Gonna pm you my email so just shoot me an email

Cool... and just so you know, if you are looking for the cheapest options, the red/blue color and black color are the cheapest(same price). The Titanium Tech finish is more than the first two and Super Nickel is the most expensive. Then the braided nylon is more expensive than the stainless... but not by much. I can quote you for all of them if you want. For example: I can quote you all four colors in angled(all angles are virtually the same price) and straight hose end. I can then quote you for stainless and nylon by the foot. Just let me know!

[axiomatik]

Toby, can I get a quote on the following parts (quoted from the previous thread):

This should be approximately what you need:

Power Steering -6 AN - High Pressure
Description----------------Part No--Qty
PS Hose BLK--------------519006--2ft
90* -6 Steel---------------509006--2
M14x1.5 -> -6 O-ring----491415--1 (for rack)
M16x1.5 -> -6 Crush------871606--1 (for pump)

Low Pressure -6/-10 AN
XR31 Hose (-6)------------3106-00--3ft
XR31 Hose (-10) ----------3110-00--2ft
M16x1.5 -> -6 O-ring-----491615--1 (for rack)
-6 90* BLK----------------209006BB--1
-6 Straight BLK----------100006BB--1
-10 Straight BLK--------100010BB--1
-10 90* BLK-------------209010BB--1
-10 Alum. Weld On-------997110--1


Planning on redoing my whole power steering system.

[Broadfield]

Toby, can I get a quote on the following parts (quoted from the previous thread):
Planning on redoing my whole power steering system.

Absolutely man, just give me your full name and email and I'll send over a quote. Feel free to PM me that info if you would rather not post it publicly.