CamryOnBronze
11-05-2012, 10:02 AM
Here's what I have left from my part out. Prices have been reduced!
1. Apexi Power FC L Jetro: Apexi Power FC standalone ECU for S13 SR20DET Blacktop with MAF setup. Includes Power Commander. Currently tuned for S15 turbo, 555cc injectors, Z32 MAF, Tomei poncams, etc. Excellent condition with original box included. Pretty hard to find these things in good condition these days, not to mention with a very usable tune on it. Dyno tuning cost me over $300.
http://farm9.staticflickr.com/8044/8101832340_3467569b23_z.jpg
http://farm9.staticflickr.com/8051/8112906561_f6fc9e8fdb_z.jpg
$850 Shipped via UPS w/ full insurance PENDING SALE
2. Cusco Tension Rods: Cusco tension rods. Used for about 3,000 miles. Great condition.
http://farm9.staticflickr.com/8336/8116183971_29335be52b_z.jpg
$180 Shipped via USPS SOLD SOLD SOLD!
3. Cusco RUCAs: Cusco rear upper control arms. Used for about 3,000 miles. Great condition.
http://farm8.staticflickr.com/7119/8155702142_b66a168c46_z.jpg
$180 Shipped via USPS SOLD SOLD SOLD!
4.) Megan Test Pipe: Used with scrapes on the flanges, but still works just fine. Gaskets and hardware not included.
http://farm9.staticflickr.com/8328/8138390349_f64e51602e_z.jpg
$40 Shipped SOLD SOLD SOLD!
5.) NISMO 555cc Side-Feed Injectors: I used these injectors for about 20k miles. Great condition and perfect for the fuel needs of the S15 GT28 turbo. Also fits the KA24.
http://farm9.staticflickr.com/8191/8138426780_f2cd059156_z.jpg
$400 Shipped via USPS SOLD SOLD SOLD!
6.) GReddy Suction Kit: Allows you to run the S15 GT28 turbo and Z32 MAF on your SR20 without clocking adapters. Includes intake pipe, brand new air filter, and both turbo inlet/outlet pipes. This kit from GReddy no longer includes these pieces. Perfect for upgrading to S15 turbo!
http://farm9.staticflickr.com/8051/8138455343_2c0c627dbc_z.jpg
http://farm8.staticflickr.com/7265/8158268098_152e5cc424_z.jpg
$230 Shipped SOLD SOLD SOLD!
7.) S15 GT28R Turbo: S15 spec R turbo used for about 22k miles. Never abused or boosted past 15 PSI. Includes:
S15 oil drain
Oil drain tube
DIF braided turbo lines with oil restrictor/fire sleeving
HKS turbo actuator
This may seem overpriced, but please keep in mind that almost $400 in extras are included with the turbo. Feel free to make a reasonable offer.
http://farm8.staticflickr.com/7265/8158210475_6e864e170c_z.jpg
http://farm9.staticflickr.com/8198/8158222465_3eb8aaeeed_z.jpg
http://farm8.staticflickr.com/7134/8158230837_c4fd680da3_z.jpg
$825 Shipped via UPS PENDING SALE
8.) GReddy Intercooler Kit: Includes intercooler core, lower cold pipe, and lower hot pipe. I was using a different cold pipe for my GReddy intake manifold that I sold with that, so I do not have a cold pipe. I do have a hot pip with BOV for sale separately below. I will include the black couplers I purchased, T-bolt clamps I added to the kit, and the original blue couplers as well.
http://farm9.staticflickr.com/8333/8138472284_58af10d3a6_z.jpg
$350 Shipped via UPS SOLD SOLD SOLD!
9.) GReddy BOV/Hot Pipe: GReddy hot pipe with flange and GReddy Type RZ blow off valve. Includes optional flange to recirculate the blow off valve if you choose to do so, and the original blow off valve box. Hot pipe has some scuffs, but is on OK condition overall.
http://farm9.staticflickr.com/8466/8138458408_13e4ab0e09_z.jpg
$295 Shipped via UPS SOLD SOLD SOLD!
10.) GReddy Radiator: Used GReddy radiator. Includes OEM Nissan rubber mounting feet and GReddy mounting brackets. Has a ding in the side of it that was there when I got it, but does not leak and cools very effectively. Pretty cool piece for the engine bay. $900 new.
http://farm9.staticflickr.com/8045/8138441309_48e4159738_z.jpg
http://farm9.staticflickr.com/8475/8138476066_69336b3652_z.jpg
$425 Shipped via UPS SOLD SOLD SOLD!
11.) Hallman Boost Controller: Used black Hallman boost controller. Includes optional spring and mounting bracket.
http://farm8.staticflickr.com/7253/8158253435_69e060b79b_z.jpg
$55 Shipped via USPS SOLD SOLD SOLD!
12.) NISMO Transmission Mount: NISMO transmission mount in great condition. Includes down pipe bracket and hardware (most S13s are missing this piece. Helps a ton with keeping the exhaust tucked up and solid.)
http://farm8.staticflickr.com/7275/8158270540_1e2f4b2c91_z.jpg
$90 Shipped via USPS SOLD SOLD SOLD!
13.) OEM SR20DET Clutch Fan & Shroud: Clutch fan in great condition. Includes shroud for SR20 as well, which can be pretty trick to find from time to time. They most effective method of cooling for the SR20 IMO. Clutch was recently rebuilt before I purchased it.
http://farm9.staticflickr.com/8470/8138445219_cb23066581_z.jpg
$110 shipped via UPS (large box) SOLD SOLD SOLD!
14. New OEM S14/S15 SR Valve Cover: Brand new from Nissan with factory black wrinkle coat finish. Great as a replacement cover or to use to build a S13.4 valve cover, which was my original intention.
I also have two Earl's -10 weld on fittings that I can include for an additional $15.
http://farm9.staticflickr.com/8190/8083999068_82faa16f45_z.jpg
$175 Shipped via UPS SOLD SOLD SOLD!
15. Chase Bays Ground Wires: High quality ground wires from Chase Bays. Perfect condition.
http://farm8.staticflickr.com/7119/8158279542_bd23a142f5_z.jpg
$40 Shipped via USPS SOLD SOLD SOLD!
All listed prices include shipping. Everything has been removed from the car and is ready to ship. I accept PayPal or cash payment in person. Please PM me with any questions or concerns- thanks!
Damon
1. Apexi Power FC L Jetro: Apexi Power FC standalone ECU for S13 SR20DET Blacktop with MAF setup. Includes Power Commander. Currently tuned for S15 turbo, 555cc injectors, Z32 MAF, Tomei poncams, etc. Excellent condition with original box included. Pretty hard to find these things in good condition these days, not to mention with a very usable tune on it. Dyno tuning cost me over $300.
http://farm9.staticflickr.com/8044/8101832340_3467569b23_z.jpg
http://farm9.staticflickr.com/8051/8112906561_f6fc9e8fdb_z.jpg
$850 Shipped via UPS w/ full insurance PENDING SALE
2. Cusco Tension Rods: Cusco tension rods. Used for about 3,000 miles. Great condition.
http://farm9.staticflickr.com/8336/8116183971_29335be52b_z.jpg
$180 Shipped via USPS SOLD SOLD SOLD!
3. Cusco RUCAs: Cusco rear upper control arms. Used for about 3,000 miles. Great condition.
http://farm8.staticflickr.com/7119/8155702142_b66a168c46_z.jpg
$180 Shipped via USPS SOLD SOLD SOLD!
4.) Megan Test Pipe: Used with scrapes on the flanges, but still works just fine. Gaskets and hardware not included.
http://farm9.staticflickr.com/8328/8138390349_f64e51602e_z.jpg
$40 Shipped SOLD SOLD SOLD!
5.) NISMO 555cc Side-Feed Injectors: I used these injectors for about 20k miles. Great condition and perfect for the fuel needs of the S15 GT28 turbo. Also fits the KA24.
http://farm9.staticflickr.com/8191/8138426780_f2cd059156_z.jpg
$400 Shipped via USPS SOLD SOLD SOLD!
6.) GReddy Suction Kit: Allows you to run the S15 GT28 turbo and Z32 MAF on your SR20 without clocking adapters. Includes intake pipe, brand new air filter, and both turbo inlet/outlet pipes. This kit from GReddy no longer includes these pieces. Perfect for upgrading to S15 turbo!
http://farm9.staticflickr.com/8051/8138455343_2c0c627dbc_z.jpg
http://farm8.staticflickr.com/7265/8158268098_152e5cc424_z.jpg
$230 Shipped SOLD SOLD SOLD!
7.) S15 GT28R Turbo: S15 spec R turbo used for about 22k miles. Never abused or boosted past 15 PSI. Includes:
S15 oil drain
Oil drain tube
DIF braided turbo lines with oil restrictor/fire sleeving
HKS turbo actuator
This may seem overpriced, but please keep in mind that almost $400 in extras are included with the turbo. Feel free to make a reasonable offer.
http://farm8.staticflickr.com/7265/8158210475_6e864e170c_z.jpg
http://farm9.staticflickr.com/8198/8158222465_3eb8aaeeed_z.jpg
http://farm8.staticflickr.com/7134/8158230837_c4fd680da3_z.jpg
$825 Shipped via UPS PENDING SALE
8.) GReddy Intercooler Kit: Includes intercooler core, lower cold pipe, and lower hot pipe. I was using a different cold pipe for my GReddy intake manifold that I sold with that, so I do not have a cold pipe. I do have a hot pip with BOV for sale separately below. I will include the black couplers I purchased, T-bolt clamps I added to the kit, and the original blue couplers as well.
http://farm9.staticflickr.com/8333/8138472284_58af10d3a6_z.jpg
$350 Shipped via UPS SOLD SOLD SOLD!
9.) GReddy BOV/Hot Pipe: GReddy hot pipe with flange and GReddy Type RZ blow off valve. Includes optional flange to recirculate the blow off valve if you choose to do so, and the original blow off valve box. Hot pipe has some scuffs, but is on OK condition overall.
http://farm9.staticflickr.com/8466/8138458408_13e4ab0e09_z.jpg
$295 Shipped via UPS SOLD SOLD SOLD!
10.) GReddy Radiator: Used GReddy radiator. Includes OEM Nissan rubber mounting feet and GReddy mounting brackets. Has a ding in the side of it that was there when I got it, but does not leak and cools very effectively. Pretty cool piece for the engine bay. $900 new.
http://farm9.staticflickr.com/8045/8138441309_48e4159738_z.jpg
http://farm9.staticflickr.com/8475/8138476066_69336b3652_z.jpg
$425 Shipped via UPS SOLD SOLD SOLD!
11.) Hallman Boost Controller: Used black Hallman boost controller. Includes optional spring and mounting bracket.
http://farm8.staticflickr.com/7253/8158253435_69e060b79b_z.jpg
$55 Shipped via USPS SOLD SOLD SOLD!
12.) NISMO Transmission Mount: NISMO transmission mount in great condition. Includes down pipe bracket and hardware (most S13s are missing this piece. Helps a ton with keeping the exhaust tucked up and solid.)
http://farm8.staticflickr.com/7275/8158270540_1e2f4b2c91_z.jpg
$90 Shipped via USPS SOLD SOLD SOLD!
13.) OEM SR20DET Clutch Fan & Shroud: Clutch fan in great condition. Includes shroud for SR20 as well, which can be pretty trick to find from time to time. They most effective method of cooling for the SR20 IMO. Clutch was recently rebuilt before I purchased it.
http://farm9.staticflickr.com/8470/8138445219_cb23066581_z.jpg
$110 shipped via UPS (large box) SOLD SOLD SOLD!
14. New OEM S14/S15 SR Valve Cover: Brand new from Nissan with factory black wrinkle coat finish. Great as a replacement cover or to use to build a S13.4 valve cover, which was my original intention.
I also have two Earl's -10 weld on fittings that I can include for an additional $15.
http://farm9.staticflickr.com/8190/8083999068_82faa16f45_z.jpg
$175 Shipped via UPS SOLD SOLD SOLD!
15. Chase Bays Ground Wires: High quality ground wires from Chase Bays. Perfect condition.
http://farm8.staticflickr.com/7119/8158279542_bd23a142f5_z.jpg
$40 Shipped via USPS SOLD SOLD SOLD!
All listed prices include shipping. Everything has been removed from the car and is ready to ship. I accept PayPal or cash payment in person. Please PM me with any questions or concerns- thanks!
Damon