Just registered/ First time S14 Owner NC

[BadIntentionS14]

Just wanted to introduce myself and see if I recieve any tips or advice to Zilvia.net.


Im new to forums and I just purchased my first 240SX. It's a
Black 1995 240SX Zenki SE 5 Speed (Will post pics up later, horrible weather right now). I've got Fortune Auto 500 Series Coilovers and a J30 LSD. I bought it this way and I love it :snoop:
I waited to join Zilvia.net until I actually purchased a S-chassis. Im throwin 3 codes (P0325 & P0705 2 I remember off the top of my head) and I'm currently searching for more info on how-to's, symptoms, diagnosing, and if I should worry. One code is from a EGR Flow Malfunction because of the missing EVAP canister. The 2 I listed were knock sensor malfunction and transmission range sensor malfunction which I thought was only with autos.


Anyways see you guys around the .net

[merks]

Replace the 1st O2 sensor on the header to solve the knock sensor code. I replaced my knock sensor and still got that code until I replaced the O2.

What part of NC are you in?

[BadIntentionS14]

Fayetteville Area. Thanks man for the first reply lol
How did yours run with the bad O2 sensor? Did it has a strong gassy smell? Did it's idle go up and down much? I'm checking the IACV and for vacuum leaks tomorrow. Hopefully get some pictures while I'm at it to prove I own the car.

So I'm a little bummed I went to confirm that my car did indeed have a J30 LSD and found out that it wasn't. I knew from the 6 bolt pattern then that I either had an open diff or a VLSD which is kinda rare. The diff looked like it was more than likely the original factory diff so I decided that I would try decoding the model#. So I checked my 18th digit on my model# and it was "-". Yes I know kinda not what I was expecting or hoping for, it's a open diff.

http://www.240sxforums.com/forums/s13-240sx-89-94/88261-how-can-i-tell-if-i-have-vlsd.html

[BadIntentionS14]

Here's a couple photos I've been trying to get some when Im not working. sorry if they are poor quailty I took them with my banged up droid.

I've since painted the bottom lip and I'm searching for a replacement foglight for the driver side that doesnt have a busted lens like mine. I have also fixed an exhaust rattle, got an alignment since the FA 500 series coils. I'm wanting to source out a spare ka24de to build for boost and problaly a "whitebunny" clutch & flywheel kit. I love my car at night since it needs paint and I dyed the headliner and the A pillars black.


Found some 18x9 Volks(I'm not aware what type of Volks but I know they are black and got the right bolt pattern) today that I will be getting off a friend for really good price. Hopefully the deal goes through and I will have pics up of those soon.

[silviaNC]

Join carolinanissans.com
Most of us are from raleigh and fayetteville area and there is meetings wed and thursdays.

[BadIntentionS14]

Join carolinanissans.com
Most of us are from raleigh and fayetteville area and there is meetings wed and thursdays.

I just joined thanks for the invite dude! Same profile name on there as well


So the Volk's I found a deal on areTE37's 18x9 +35 mm (all of them are) offset I'm kind of worried about the offset do you guys think they will fit?

Edit: Nvrmind from what I am seeing on rimtuck they will look stupid now if they were 18x9.5 +12-15 then I would be more in the ball park of were I needed to be.