Behind Horizon
10-27-2012, 05:48 PM
Hello guys,
for sale are stated below parts. All parts are brand new if not stated otherwise.
If you have any questions or if you are interested in the parts just let me know by a private message.
All prices include shipping.
- private offer/sale -
[ Fueling ]
6x Bosch Injectors 440cc (480cc 550cc 600cc) Top Feed, EV 6 CS incl. Plug . Price USD 600,00
These injectors are brand new and fully functional and are originally beeing used by Porsche in the GT3. Original price was ~700,00 EUR, Bosch part number 0280156012,
high impedance 12 Ohm, max. 8 bar fuel pressure, can be used on 6 bar pressure all day long, the performance depends on the fuel pressure:
453cc @ 43.5 psi/3 Bar (standard-pressure), max. ~400hp,
480cc @ 49 psi/3.4 Bar, max. ~450hp,
555cc @ 65 psi/4.5 Bar, max. ~500hp,
600cc @ 76 psi/5.2 Bar max. ~550hp,
640cc @ 87 psi/6 Bar, max. ~600hp
RB20DET & RB25DET NEO - plug & play
RB25DET - you will need a Greddy/Freddy Inlet Manifold + top feed rail + use included plugs
RB26DETT - you have to remove/bypass the small resistor pack see here (http://www.skylinesaustralia.com/forums/topic/62674-gtr-injectors-into-rb20det/)
Datasheet downloadable here (http://www.bosch-motorsport.de/pdf/components/injection_valves/EV_6.pdf), a good FPR is for example the "FSE Motorsport 6 Bar" (http://www.isa-racing.com/index.php/cat/c667_Motorsport-Benzindruckregler.html),
every good mapper can work with these injectors, same performance and quality as Nismo injectors but much cheaper.
http://hankxo.pytalhost.de/24012008319.jpg
http://hankxo.pytalhost.de/IMAG0062.jpg
[Cooling]
Custom made 3"/76mm FMIC Piping Price USD 200,00
This piping is ideally suited for RB25DET (with Freddy/Greddy inlet manifold and top or low mount urbo) or RB26DETT (for top mount turbo) swaps in your S13/S14/S15.
The piping will suit any FMIC and includes a fixing point for a HKS SSQV and a conneciton for the boost solenoid of your boost controller. Samco's and hose clamps aren't included.
http://hankxo.pytalhost.de/IMAG0081x.jpg
[B][Electronics]
RB25DET Power Transistor / Ignition Amp / Transistor Ignition unit / Ignitor Amp 22020-97E01. Price USD 70,00
http://hankxo.pytalhost.de/IMG_1778.JPG
for sale are stated below parts. All parts are brand new if not stated otherwise.
If you have any questions or if you are interested in the parts just let me know by a private message.
All prices include shipping.
- private offer/sale -
[ Fueling ]
6x Bosch Injectors 440cc (480cc 550cc 600cc) Top Feed, EV 6 CS incl. Plug . Price USD 600,00
These injectors are brand new and fully functional and are originally beeing used by Porsche in the GT3. Original price was ~700,00 EUR, Bosch part number 0280156012,
high impedance 12 Ohm, max. 8 bar fuel pressure, can be used on 6 bar pressure all day long, the performance depends on the fuel pressure:
453cc @ 43.5 psi/3 Bar (standard-pressure), max. ~400hp,
480cc @ 49 psi/3.4 Bar, max. ~450hp,
555cc @ 65 psi/4.5 Bar, max. ~500hp,
600cc @ 76 psi/5.2 Bar max. ~550hp,
640cc @ 87 psi/6 Bar, max. ~600hp
RB20DET & RB25DET NEO - plug & play
RB25DET - you will need a Greddy/Freddy Inlet Manifold + top feed rail + use included plugs
RB26DETT - you have to remove/bypass the small resistor pack see here (http://www.skylinesaustralia.com/forums/topic/62674-gtr-injectors-into-rb20det/)
Datasheet downloadable here (http://www.bosch-motorsport.de/pdf/components/injection_valves/EV_6.pdf), a good FPR is for example the "FSE Motorsport 6 Bar" (http://www.isa-racing.com/index.php/cat/c667_Motorsport-Benzindruckregler.html),
every good mapper can work with these injectors, same performance and quality as Nismo injectors but much cheaper.
http://hankxo.pytalhost.de/24012008319.jpg
http://hankxo.pytalhost.de/IMAG0062.jpg
[Cooling]
Custom made 3"/76mm FMIC Piping Price USD 200,00
This piping is ideally suited for RB25DET (with Freddy/Greddy inlet manifold and top or low mount urbo) or RB26DETT (for top mount turbo) swaps in your S13/S14/S15.
The piping will suit any FMIC and includes a fixing point for a HKS SSQV and a conneciton for the boost solenoid of your boost controller. Samco's and hose clamps aren't included.
http://hankxo.pytalhost.de/IMAG0081x.jpg
[B][Electronics]
RB25DET Power Transistor / Ignition Amp / Transistor Ignition unit / Ignitor Amp 22020-97E01. Price USD 70,00
http://hankxo.pytalhost.de/IMG_1778.JPG