CamryOnBronze
10-23-2012, 08:29 AM
IF A PART IS NOT LISTED, IT IS NOT FOR SALE OR HAS BEEN SOLD.
Well guys, it’s been an awesome run for my S13. I’ve enjoyed every bit of this build over the last four years, but now that I have a family and I have grown a bit older, my life and priorities have changed. It sounds cliché and I never really thought it would happen to me, but I’ve decided that it is time to move on.
I’ll be parting out the car in stages. Please do not ask me about a part that is not posted for sale here. If it is not listed here, it is currently not posted for sale or may have already been sold. The partout will be split into a few different phases/threads as I have the time to remove and document items. All of the items listed below have already been removed.
Here are some leftover items from Wave 1:
EXTERIOR:
1. DMAX Carbon Fiber Vented Hood: Genuine DMAX CF vented hood for 180SX. Includes Cusco hood pins that have been painted to match Koguchi’s car. The hood is carbon fiber, but has been painted black. All vents and hardware are included. No major blemishes or issues, and fits very well for a DMAX hood. Complete hood pins and keys included.
http://farm9.staticflickr.com/8454/7943750528_c5400c85c2_z.jpg
$600 PICKED UP SOLD SOLD SOLD!
INTERIOR:
1. Bride FG Side Mount Seat Rail: Genuine Bride FG seat rail, with hardware included. For USDM driver’s side 240SX and most side mount seats. Excellent condition.
http://farm9.staticflickr.com/8184/8112910510_195c239532_z.jpg
$195 shipped via UPS SOLD SOLD SOLD!
2. Tomei Short Shifter: Genuine Tomei short shifter for S13/S14 SR20. Includes all necessary components, in addition to a Cusco brass Shifter bushing. Awesome and hard to find piece!
http://farm9.staticflickr.com/8196/8101818743_da1d1b6105_z.jpg
$245 Shipped via USPS SOLD SOLD SOLD!
3. Apexi Power FC L Jetro: Apexi Power FC standalone ECU for S13 SR20DET Blacktop with MAF setup. Includes Power Commander. Currently tuned for S15 turbo, 555cc injectors, Z32 MAF, Tomei poncams, etc. Excellent condition with original box included. Pretty hard to find these things in good condition these days, not to mention with a very usable tune on it. Dyno tuning cost me over $300.
http://farm9.staticflickr.com/8044/8101832340_3467569b23_z.jpg
http://farm9.staticflickr.com/8051/8112906561_f6fc9e8fdb_z.jpg
$890 Shipped via UPS w/ full insurance
4. Cusco Bolt-In 6 Pt. Dash Escape Roll Cage: Genuine Cusco 6 Pt. Dash escape bolt-in roll cage for S13 hatch with sunroof. Includes bottom plates and all original hardware for installation. Cage bars are in excellent condition, with minimal scratches to speak of. I paid $1050 shipped and it took 10 weeks to get the cage from Japan.
http://farm9.staticflickr.com/8455/7899975056_8540205d45_z.jpg
Main hoop not pictured, but the cage is removed and ready for pickup:
http://farm9.staticflickr.com/8050/8112912743_94607a91e5_z.jpg
$600 PICKED UP SOLD SOLD SOLD!
----------------------------------------------------------------------
NEW ITEMS! SUSPENSION:
1. NISMO Power Brace: Has some scrapes on the bottom of it, but it is in pretty good condition overall. These have recently gone up in price from Nissan!
Old Photo:
http://farm6.staticflickr.com/5140/5464196562_0aaa9fef21_z.jpg
$160 Shipped via UPS SOLD SOLD SOLD!
2. Cusco OS Front Strut Brace: Used for about 1500 miles, perfect condition. This one is designed for the CA, I got it to clear the S13.4 valve cover, since it is their highest design. Should work with all generation SRs, CA, KA, etc. Includes original box.
http://farm9.staticflickr.com/8186/8116200867_5f04686ec3_z.jpg
$140 Shipped via UPS SOLD SOLD SOLD!
3. Cusco Adjustable Suspension Arms: Cusco tension rods, RUCAs, and traction rods. Used for about 3,000 miles. All are in great condition.
http://farm9.staticflickr.com/8336/8116183971_29335be52b_z.jpg
Old Photo:
http://farm7.staticflickr.com/6205/6134461084_8f3883b5da_z.jpg
Old Photo:
http://farm7.staticflickr.com/6086/6134466958_ca978b70b9_z.jpg
$200 Shipped Traction Rods SOLD SOLD SOLD!
$200 Shipped Tension Rods
$200 Shipped RUCA
4. SPL Toe Rods: Great condition, used for about 3k miles. The black version.
Old Pic:
http://farm7.staticflickr.com/6020/6192172811_61ae0a7979_z.jpg
$180 shipped via USPS SOLD SOLD SOLD!
5. Tanabe Fender Braces: Great condition, all hardware included. I believe these are discontinued.
http://farm9.staticflickr.com/8195/8116184609_cf9cd5998a_z.jpg
$180 shipped via UPS SOLD SOLD SOLD!
6. S15 Helical Differential: I purchased this diff used and have used it for about 3k miles. Great street diff that will put the power down without clunking or destroying your tires. I owned a Tomei 2 Way as well, and this is the perfect street/track combo in my opinion. In S13 pumpkin with 6 bolt output shafts.
Old Photo:
http://farm7.staticflickr.com/6078/6133906755_18cfa02b11_z.jpg
$550 LOCAL PICKUP SOLD SOLD SOLD!
7. Driveshaft Shop Steel Driveshaft: Great condition, and rarely ever saw abuse. Steel one piece driveshaft for S13 non-ABS KA or SR.
$250 Shipped SOLD SOLD SOLD!
8. Volk Racing Formula Lug Nuts: Pretty solid condition overall. Some of the "Volk Racing" lettering has scraped off a little bit, but most of them are in great condition. Just want the buyer to know that they are indeed used. I would keep them for my Evo, but they are the wrong thread pitch. :l
$275 Shipped via USPS SOLD SOLD SOLD!
9. H&R TRAK 5mm Hubcentric Spacers: Used on the front of my car for about 1,000 miles. Super nice spacers that include mildly extended studs if you need them- I never used the studs.
http://farm9.staticflickr.com/8196/8116217850_7a7ae5cb4c_z.jpg
$50 Shipped via USPS SOLD SOLD SOLD!
Please feel free to PM me with any questions or concerns. I am getting out of the S-chassis game, so I am not looking for trades of any kind. Payment must be made as cash in person or via PayPal. I am looking to make this as quick and painless as possible, so I will not be able to hold parts for extended periods of time- cash is king. Please see my iTrader feedback for any concerns, and don’t hesitate to shoot me a PM. Thanks!
MOST of the items shown above are removed from the car and ready to ship the day after payment has been received. Current photos will be posted ASAP of items that do not currently have a photo. My partout has been moving VERY smoothly and efficiently, with most items being shipped out the day after payment has been received. I'm sure some of my customers from Wave 1 can vouch for me!
Thanks a lot for the interest and support.
Damon
Well guys, it’s been an awesome run for my S13. I’ve enjoyed every bit of this build over the last four years, but now that I have a family and I have grown a bit older, my life and priorities have changed. It sounds cliché and I never really thought it would happen to me, but I’ve decided that it is time to move on.
I’ll be parting out the car in stages. Please do not ask me about a part that is not posted for sale here. If it is not listed here, it is currently not posted for sale or may have already been sold. The partout will be split into a few different phases/threads as I have the time to remove and document items. All of the items listed below have already been removed.
Here are some leftover items from Wave 1:
EXTERIOR:
1. DMAX Carbon Fiber Vented Hood: Genuine DMAX CF vented hood for 180SX. Includes Cusco hood pins that have been painted to match Koguchi’s car. The hood is carbon fiber, but has been painted black. All vents and hardware are included. No major blemishes or issues, and fits very well for a DMAX hood. Complete hood pins and keys included.
http://farm9.staticflickr.com/8454/7943750528_c5400c85c2_z.jpg
$600 PICKED UP SOLD SOLD SOLD!
INTERIOR:
1. Bride FG Side Mount Seat Rail: Genuine Bride FG seat rail, with hardware included. For USDM driver’s side 240SX and most side mount seats. Excellent condition.
http://farm9.staticflickr.com/8184/8112910510_195c239532_z.jpg
$195 shipped via UPS SOLD SOLD SOLD!
2. Tomei Short Shifter: Genuine Tomei short shifter for S13/S14 SR20. Includes all necessary components, in addition to a Cusco brass Shifter bushing. Awesome and hard to find piece!
http://farm9.staticflickr.com/8196/8101818743_da1d1b6105_z.jpg
$245 Shipped via USPS SOLD SOLD SOLD!
3. Apexi Power FC L Jetro: Apexi Power FC standalone ECU for S13 SR20DET Blacktop with MAF setup. Includes Power Commander. Currently tuned for S15 turbo, 555cc injectors, Z32 MAF, Tomei poncams, etc. Excellent condition with original box included. Pretty hard to find these things in good condition these days, not to mention with a very usable tune on it. Dyno tuning cost me over $300.
http://farm9.staticflickr.com/8044/8101832340_3467569b23_z.jpg
http://farm9.staticflickr.com/8051/8112906561_f6fc9e8fdb_z.jpg
$890 Shipped via UPS w/ full insurance
4. Cusco Bolt-In 6 Pt. Dash Escape Roll Cage: Genuine Cusco 6 Pt. Dash escape bolt-in roll cage for S13 hatch with sunroof. Includes bottom plates and all original hardware for installation. Cage bars are in excellent condition, with minimal scratches to speak of. I paid $1050 shipped and it took 10 weeks to get the cage from Japan.
http://farm9.staticflickr.com/8455/7899975056_8540205d45_z.jpg
Main hoop not pictured, but the cage is removed and ready for pickup:
http://farm9.staticflickr.com/8050/8112912743_94607a91e5_z.jpg
$600 PICKED UP SOLD SOLD SOLD!
----------------------------------------------------------------------
NEW ITEMS! SUSPENSION:
1. NISMO Power Brace: Has some scrapes on the bottom of it, but it is in pretty good condition overall. These have recently gone up in price from Nissan!
Old Photo:
http://farm6.staticflickr.com/5140/5464196562_0aaa9fef21_z.jpg
$160 Shipped via UPS SOLD SOLD SOLD!
2. Cusco OS Front Strut Brace: Used for about 1500 miles, perfect condition. This one is designed for the CA, I got it to clear the S13.4 valve cover, since it is their highest design. Should work with all generation SRs, CA, KA, etc. Includes original box.
http://farm9.staticflickr.com/8186/8116200867_5f04686ec3_z.jpg
$140 Shipped via UPS SOLD SOLD SOLD!
3. Cusco Adjustable Suspension Arms: Cusco tension rods, RUCAs, and traction rods. Used for about 3,000 miles. All are in great condition.
http://farm9.staticflickr.com/8336/8116183971_29335be52b_z.jpg
Old Photo:
http://farm7.staticflickr.com/6205/6134461084_8f3883b5da_z.jpg
Old Photo:
http://farm7.staticflickr.com/6086/6134466958_ca978b70b9_z.jpg
$200 Shipped Traction Rods SOLD SOLD SOLD!
$200 Shipped Tension Rods
$200 Shipped RUCA
4. SPL Toe Rods: Great condition, used for about 3k miles. The black version.
Old Pic:
http://farm7.staticflickr.com/6020/6192172811_61ae0a7979_z.jpg
$180 shipped via USPS SOLD SOLD SOLD!
5. Tanabe Fender Braces: Great condition, all hardware included. I believe these are discontinued.
http://farm9.staticflickr.com/8195/8116184609_cf9cd5998a_z.jpg
$180 shipped via UPS SOLD SOLD SOLD!
6. S15 Helical Differential: I purchased this diff used and have used it for about 3k miles. Great street diff that will put the power down without clunking or destroying your tires. I owned a Tomei 2 Way as well, and this is the perfect street/track combo in my opinion. In S13 pumpkin with 6 bolt output shafts.
Old Photo:
http://farm7.staticflickr.com/6078/6133906755_18cfa02b11_z.jpg
$550 LOCAL PICKUP SOLD SOLD SOLD!
7. Driveshaft Shop Steel Driveshaft: Great condition, and rarely ever saw abuse. Steel one piece driveshaft for S13 non-ABS KA or SR.
$250 Shipped SOLD SOLD SOLD!
8. Volk Racing Formula Lug Nuts: Pretty solid condition overall. Some of the "Volk Racing" lettering has scraped off a little bit, but most of them are in great condition. Just want the buyer to know that they are indeed used. I would keep them for my Evo, but they are the wrong thread pitch. :l
$275 Shipped via USPS SOLD SOLD SOLD!
9. H&R TRAK 5mm Hubcentric Spacers: Used on the front of my car for about 1,000 miles. Super nice spacers that include mildly extended studs if you need them- I never used the studs.
http://farm9.staticflickr.com/8196/8116217850_7a7ae5cb4c_z.jpg
$50 Shipped via USPS SOLD SOLD SOLD!
Please feel free to PM me with any questions or concerns. I am getting out of the S-chassis game, so I am not looking for trades of any kind. Payment must be made as cash in person or via PayPal. I am looking to make this as quick and painless as possible, so I will not be able to hold parts for extended periods of time- cash is king. Please see my iTrader feedback for any concerns, and don’t hesitate to shoot me a PM. Thanks!
MOST of the items shown above are removed from the car and ready to ship the day after payment has been received. Current photos will be posted ASAP of items that do not currently have a photo. My partout has been moving VERY smoothly and efficiently, with most items being shipped out the day after payment has been received. I'm sure some of my customers from Wave 1 can vouch for me!
Thanks a lot for the interest and support.
Damon