s14 1995 240sx ka24de starter removal need help asap

[dane]

Looking on some detailed pictures / help on removing / replacing a starter for a ka24de 1995 240sx. Asap please

[hardparkd]

disconnect neg batt terminal
13mm wrench to remove posotive cable from post
14mm wrench on top bolt, go at it from behind the intake mani.
14mm socket with decent rachet under the car, right above the clutch fork.
pull out and install same way as taken out.

easy peasy.. shouldn't take longer than 30 mins.

[irax]

Step 1
Disconnect batter
Step 2
Jack up car
Step 3
Place car on jack stands
Step 4
Visually identify the starter
Step 5
Remove starter


for installation
Step 1
Install starter
Step 2
Make sure everything is bolted and plugged in correctly
Step 3
Take car off jack stands
Step 4
Put car on the ground
Step 5
Reconnect the battery and start the car


If car does not start go to step 2 of install procedure


If this doesn't help you, I'm sorry... pick up a new hobby. Or take Introduction to Auto Mechanics at Spring Community College or HCC.

[dane]

Locating the top bolt was the hard part. It was not my mechanical ability.

[irax]

says the kid who asked how to remove a starter on a 240sx

mind you, if you asked how to remove the starter on a Lexus LS400 or Infinity Q45 I would understand because both of those require removing the intake manifold and a bunch of stupid shit.

[fliprayzin240sx]

Easiest way is crawling under the car. Fuck trying to get to at the starter from the engine bay.