S14 SR20 GT3071R ++Extras

[RawrSoft]

**not parting out just quite yet**

Alright, so I have my motor up for sale. It has between 10-50 miles and I'm selling it because my friend took the liberty of crashing the chassis this was in and I no longer want to try and fix my beloved 510. The motor came out running perfectly, and if you float around zilvia to try and find my 510, you'll see the impact and damage really isn't that substantial. Nothing touched the motor, but I just don't feel the need to fix the car at this point so I'm selling everything and he's ( friend ) going to be footing the rest of what I don't recover in sales.

Every nut / bolt, oil / coolant line, seal / gasket and grommet has been replaced. This is a brand new motor from top to bottom.. well, the block is original haha. The entire motor has been disassembled, cleaned and put back together within 5 miles running time.

S14 SR20DET
Circuit Sports RAS
Forged Pistons
Freddy Intake Manifold Powder Coated
Top Mount Exhaust Manifold Ceramic Coated
GT3071R (Absolutely perfect condition with no more than 50 miles)
Tomei 555cc Injectors
Z32 MAF
Apexi Intake
Circuit Sports Fuel Rail
Crower Valves / Retainers / Springs
Crower Cams
New 02 Sensor / thermostat / pump
Brand new Wiring Specialties Main engine harness ( only injector and coil harness are used )
JWT Tuned ECU
ACT 6 puck clutch and PP

There's quite a bit of things I'm missing here and there, but this is the jist of it.

I have a million pictures, and if you'd like all of them ill post them, but here's a few to get you started

http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1637.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_0613.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1448.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1438.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1511-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1509-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1489-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1515-1.jpg
http://i12.photobucket.com/albums/a218/rawrsoft/IMG_1630.jpg
Just even small things like the intake bolts.. Stainless steel so that they transfer less heat in addition to the spaced gasket..

$4,500
Feel free to shoot me offers, or tell me what you think it's worth. There's quite a lot of other parts I have laying around as well.. intercoolers, radiators, piping, FPR, Transmission. So if you decide to come check it out, I have everything needed to make it run and might just let you have it for free if you're a rad person lol.

I'm Located in Temecula~

[Kodykinns]

im a pretty rad person, you should give me it!

[s13mikesr20]

Dude you have a 510 right there make it happen :bite:

And a long shot .....I have a 35r similar v band setup as you would you sell the v band pipe for that turbo

[s13mikesr20]

And metal can be worked with restore and make sicker

[RawrSoft]

I'm not quite ready to part things just yet! I'd love to fix the 510, but I just don't have the time.. It's easily fixable, but I spent every day for 3 months under this thing to have my friend put a hamper on things.. I just don't have the drive to do it anymore!
I will let you know happen I decide to start parting things though!

[ForeignMuscle]

What kind of top mount log is that?

[RawrSoft]

It's a ceramic coated ProTech log

[s13mikesr20]

im sorry to hear that theres nothing like a 510 running 10s making all them v8 guys say what the heeelllssss

[RawrSoft]

Haha, no kidding, it would have been rad for sure! Never know, if things don't sell I may just tear front the fire wall forward and then cage the whole thing.
Bump~

[RawrSoft]

A last bump couldn't hurt

[K_style]

Could I have first dip on 3071r in case you are parting out in future?

[RawrSoft]

Could I have first dip on 3071r in case you are parting out in future?

Sure thing sir.

[bblack_91240]

That is a beautiful set up and that 510......LAWDY!! Haha so nice GLWS

[mr2gons14]

my god love that engine glws

[RawrSoft]

Bumpy dump?

[low revs]

I've got a 510 I'd love to put that in, but my wife would kill me for dropping $4500 on it
:-(

[SharkMan]

Could I have first dip on 3071r in case you are parting out in future?

Awwwww man

[wangan_cruiser]

friends shouldnt let friends crash. still fuck your friend. he probably jealous on your set up thats why he crashed your car. good luck with the sale though.

[RawrSoft]

I've got a 510 I'd love to put that in, but my wife would kill me for dropping $4500 on it
:-(

Lol, yea I understand that. I didn't start this project til' I broke up with my girlfriend. She went nuts when I spent 2.5k building a trials bike.. That x5 and she'd have gone bananas!
Amazing that even though they aren't making the money, most feel as though they are entitled to it.

[75bluemage]

i might have a buyer for you my cousin is looking for a motor i will hit him up.

[75bluemage]

BTW are you parting out your 240sx? im looking for a driver door panel and key lock.

[RawrSoft]

Sure let me know.
This was actually in a 510, sorry I don't have any 240 parts :(

[RawrSoft]

Update: This motor will be available til' wednesday. Not trying to rush anyone, but my welder will have the 510 wednesday if I'm unable to sell it (motor), and will be getting a full cage and this will be going back in! I just have to get something going, damn thing is depressing me!

[K_style]

Update: This motor will be available til' wednesday. Not trying to rush anyone, but my welder will have the 510 wednesday if I'm unable to sell it (motor), and will be getting a full cage and this will be going back in! I just have to get something going, damn thing is depressing me!

So will you part out? or keeping all the stuff?

[Jmerz]

Is the motor still available? I live in Yucaipa not to far from you.

[RawrSoft]

So will you part out? or keeping all the stuff?

Sorry, but I'm not likely to part it!

[K_style]

Sorry, but I'm not likely to part it!

You suck... LOL

Good luck

[RawrSoft]

Auto body guys are a pain in my ass! Apparently its taboo to work on a 1971. Anyway, starting the process, but no money has changed hands to get it going yet. I'll update when I Actually find someone to do it and it's set in stone. Until then, this is another bump for a motor sale.

[RawrSoft]

bump, looking for a new 510 chassis possibly, If you know of a clean one please pm me ( Assuming you don't want to buy the motor :) ).

[richmond82]

Clean. Nice Work. I had Cerakote do my intake fuel rail turbo housing and valve cover in the same color.... love it !

glws

[RawrSoft]

Turkey bump.. can I do that?

[bftII40]

Do you have any recent pics of the engine or are these the latest? Also what brand head gasket is it? Thickness?

[Future240]

Over the 2 bump limit, you can start a new thread in 3 days.