Reexx13
10-18-2012, 05:09 PM
model :1993 240sx se
Exterior: pignose oem lip, rear bomex valence(rare), front jdm half/half turn signals
interior: stock interior just a cd kenwood deck. HUD dash.two lil cracks on dash. got a dash board cover. buddy club brackets with bucket seat(no name brand but brand new),got a nrg quick release as well as hub and the lock for it. momo monte carlo steering wheel, nismo butt plug shift knob
engine: 158k on chassis. strong running ka24de never had problems no leaks what so ever, this is my daily car and it is reliable as hell, drove it 4.5hrs up north and back and never had a issue, [PASSES SMOG WITH NO PROBLEM WITH AFTERMARKET EXHAUST MANIFOLD AND INTAKE] JUST PASSED SMOG THIS YEAR! pacesetter headers. upgraded radiator with brand new piping. aem intake(with carb sticker). have aspec blast pipes on my car took it off due to a fix it ticket, willing to throw that in if buyer wants them, msd ignition coil pack
suspension/driveterrain: powered by max competition coilovers, beefy traction/toe arms in the rear, whiteline sway bars, front alutec/circuit sport strut tower bar, alutec/circuit sport rear trunk floor bar, viscous lsd, recently changed clutch master cylinder as well as well as the clutch(exedy oem replacement) (recently changed the lsd fluid as well as the tranny fluid)
wheels/tires: very clean, freshly powder coated rs watanabe 16x9 0 offest all around with cheap hercules tires, 10mm spacers up front to clear calipers, willing to throw stock se rims on if you dont want these rims
cons: two cracks on dash, heater and ac(blows cold) are in working condition but blower recently went out. just havent had much time lately. minor dent on passanger quarter panel(not bad). needs a new paint job. front fenders pulled ugly have an extra driver side fender i can throw in thats in good condition
have a lot of parts as well because i was debating on going ka-t...s15 bb turbo with hks actuator, megan elbow, megan downpipe, walbro 255 lph plug and play fuel pump, s14 intake mani, stock sr intercooler, innovate wideband controller(bnib)
extra parts: stock radiator with stock piping, stock steering wheel(if you dont want the nrg quick release with monte carlo), knock off nardi steering wheel, momo steering hub, h&r 25mm slip on spacers, project kic bolt on wheel spacers 20mm
may have more things i will list them as i come across them if not listed already
[turbo parts and extra parts are sold separately unless i get a decent offer]
i want to know what you guys think i can get for my ride or what you guys have to offer, put a lot of work into this car, bought my car stock so pretty much everything done to it is by me and my buddies... so i have a firm opinion on what it is worth...
price is not set but ill start $4500 w/o rims
$6000 with the rs watanabes
front:
http://i742.photobucket.com/albums/xx66/ganjahmon87/7648791740_3660783f5b_b.png
http://i742.photobucket.com/albums/xx66/ganjahmon87/_MG_3572.jpg
rear:
http://i742.photobucket.com/albums/xx66/ganjahmon87/img_0701.jpg
passengers side:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0633.png
drivers side:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0817.jpg
engine: this is without the upgraded radiator and piping if you want ill send current pic of engine
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0252.jpg
interior:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0909.jpg
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0902.jpg
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0908.jpg
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0901.jpg
driver door interior:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0905.jpg
passenger door interior:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0903.jpg
im rarely on zilvia but i try to check as much as possible when im on a computer,
for any additional pictures or information pm me or text me at 805 598 4351
Exterior: pignose oem lip, rear bomex valence(rare), front jdm half/half turn signals
interior: stock interior just a cd kenwood deck. HUD dash.two lil cracks on dash. got a dash board cover. buddy club brackets with bucket seat(no name brand but brand new),got a nrg quick release as well as hub and the lock for it. momo monte carlo steering wheel, nismo butt plug shift knob
engine: 158k on chassis. strong running ka24de never had problems no leaks what so ever, this is my daily car and it is reliable as hell, drove it 4.5hrs up north and back and never had a issue, [PASSES SMOG WITH NO PROBLEM WITH AFTERMARKET EXHAUST MANIFOLD AND INTAKE] JUST PASSED SMOG THIS YEAR! pacesetter headers. upgraded radiator with brand new piping. aem intake(with carb sticker). have aspec blast pipes on my car took it off due to a fix it ticket, willing to throw that in if buyer wants them, msd ignition coil pack
suspension/driveterrain: powered by max competition coilovers, beefy traction/toe arms in the rear, whiteline sway bars, front alutec/circuit sport strut tower bar, alutec/circuit sport rear trunk floor bar, viscous lsd, recently changed clutch master cylinder as well as well as the clutch(exedy oem replacement) (recently changed the lsd fluid as well as the tranny fluid)
wheels/tires: very clean, freshly powder coated rs watanabe 16x9 0 offest all around with cheap hercules tires, 10mm spacers up front to clear calipers, willing to throw stock se rims on if you dont want these rims
cons: two cracks on dash, heater and ac(blows cold) are in working condition but blower recently went out. just havent had much time lately. minor dent on passanger quarter panel(not bad). needs a new paint job. front fenders pulled ugly have an extra driver side fender i can throw in thats in good condition
have a lot of parts as well because i was debating on going ka-t...s15 bb turbo with hks actuator, megan elbow, megan downpipe, walbro 255 lph plug and play fuel pump, s14 intake mani, stock sr intercooler, innovate wideband controller(bnib)
extra parts: stock radiator with stock piping, stock steering wheel(if you dont want the nrg quick release with monte carlo), knock off nardi steering wheel, momo steering hub, h&r 25mm slip on spacers, project kic bolt on wheel spacers 20mm
may have more things i will list them as i come across them if not listed already
[turbo parts and extra parts are sold separately unless i get a decent offer]
i want to know what you guys think i can get for my ride or what you guys have to offer, put a lot of work into this car, bought my car stock so pretty much everything done to it is by me and my buddies... so i have a firm opinion on what it is worth...
price is not set but ill start $4500 w/o rims
$6000 with the rs watanabes
front:
http://i742.photobucket.com/albums/xx66/ganjahmon87/7648791740_3660783f5b_b.png
http://i742.photobucket.com/albums/xx66/ganjahmon87/_MG_3572.jpg
rear:
http://i742.photobucket.com/albums/xx66/ganjahmon87/img_0701.jpg
passengers side:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0633.png
drivers side:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0817.jpg
engine: this is without the upgraded radiator and piping if you want ill send current pic of engine
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0252.jpg
interior:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0909.jpg
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0902.jpg
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0908.jpg
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0901.jpg
driver door interior:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0905.jpg
passenger door interior:
http://i742.photobucket.com/albums/xx66/ganjahmon87/IMG_0903.jpg
im rarely on zilvia but i try to check as much as possible when im on a computer,
for any additional pictures or information pm me or text me at 805 598 4351