FS/FT VH45DE Swap w/ z33 6-spd

[dlucke17]

Whats up Zilvia,

Got my motor and tranny set for sale that I was working to put in an S14. With a 50+ hour work week and a 4mth old at home, I just don't have the time to put towards a project like this and I am tired of watching it sit. So here is what I got; 91 VH45DE mated to a z33 6-spd tranny.

I am looking to sell it straight out OR trade for something that I can have in my car and running over a weekend. So, something turn-key, ready to go. The only thing it could be missing is the tranny (if its an SR swap) b/c I have the S15 6-spd tranny sitting in the garage.

Shoot me some offers or let me know what you got. email me dlucke17 AT yahoo.com

So, to the goodies... (AND I am 100% sure I will be forgetting stuff that will be included)

Engine 91 Q45 VH45DE (OD when I drove the car home, 116,xxx)
Full gasket / rebuild kit
New Water pump / thermostat
KA power steering pump pulley
Excessive Manu. S14 Motor Mounts
Full Q45 OEM Wiring Harness
Q45 ECU
Belts, filters, etc

Donor car
http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/photobucket-2481-1330720956068.jpg
http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/photobucket-1614-1330720958256.jpg

Engine pics
http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-32-30_284.jpg
http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-30-33_128.jpg
http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-31-04_382.jpg
http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-32-00_786.jpg
http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-32-16_391.jpg

Transmission 07 350z (z33 - cd009) 6-spd
Alum welded q45 tranny ring to fit the z33 tranny
BNIB Slave cylinder
B&M Short Shifter
z32 flywheel (removed ring gear and put on backwards so starter would engage)
z33 OEM clutch & PP

Cut tranny flange
http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/photobucket-3116-1330904712982.jpg

Weld
http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/2012-04-08_09-51-24_209.jpg
http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/2012-04-08_09-52-03_307.jpg
http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/2012-04-08_09-51-45_858.jpg

http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-30-10_400.jpg
http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-33-05_46.jpg
http://i37.photobucket.com/albums/e62/dlucke17/2012-10-17_18-32-47_643.jpg
http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/photobucket-3063-1330904715804.jpg

Flywheel / Starter

http://i37.photobucket.com/albums/e62/dlucke17/Auto/240sx/MyBuild/Motor_Drivetrain/photobucket-3172-1330904709198.jpg

[je_decoy]

bump up pm'd u

[dlucke17]

bump up pm'd u

Replied... Any trades or offers?

[slipnslide88]

i might be interested i have a turn key swap i traded my vh45 swap for lol. i may like another but do you have headers and driveshaft?

[dlucke17]

i might be interested i have a turn key swap i traded my vh45 swap for lol. i may like another but do you have headers and driveshaft?

No to either. I have three different driveshafts that I was going to mock up once I got to that stage. One is the 350z CF driveshaft that was said to measure up. Don't have those numbers on me right now.

Just with job, wife, newborn I don't have the needed time.

[turbob16ef]

How much is the selling price?

[dlucke17]

How much is the selling price?

Would like to get $3500 out of it.

[Shift n Drift]

pm'ed youuuu

[dlucke17]

replied... not parting out, sorry guys.

[powahh]

What clutch/flywheel are you using?
And does it meet in the right place if you do this whole welding the ring thing?

[powahh]

Oh my bad. Didnt notice Z32 flywheel and clutch.
My other question still stands