dgms240
10-15-2012, 09:59 PM
Like the title says, I'm considering selling my S13. Looking for $7000 OBO. The car is 99% complete, needs a coil and ignition module (or you can use the msd ignition and coil that come with the car, the msd needs to be sent off which will be about $80 the coil is new), also the engine still needs to be broken-in so car will need to be towed. The engine is freshly built, as in zero miles. I really don't want to sell it but being a full time student and planning a wedding isn't easy on the wallet. Anyway here's the info:
Car:
1990 240sx hatch
5-Speed
300zx Front brake swap
The last time the car was dyno'd (same setup, stock bottom-end) made 425hp at 22psi, and 380 at 15psi(current tune).
Engine:
KA24DE swap
Block bored .040" and decked
Eagle rods
Wiseco pistons 9:1
Polished crank
Balanced rotating assembly
Head decked to match block
Cometic HG
ARP head and main studs
ARP rod bolts
'91 cams
Master Power 62-1 T4 Turbo (.70/.96)a/r with v-band
HKS wastegate
Turbonetics BOV
Custom Tubular Turbo Manifold
Custom downpipe with flex-pipe
XS Power Exhaust
Custom Aluminum Intake Manifold
Q45 90mm Throttle body
FMIC large w/ custom piping (Don't remember brand of IC at the moment, will edit later)
850cc top feed injectors
Bosch 300lph fuel pump
Stainless lines w/ AN fittings
Aeromotive Filter and FPR
ACT Clutch (4 puck unsprung, extreme pressure plate)
Electronics:
Haltech E6K Full Standalone
Flying Lead harness (tucked)
MSD Digital-6 Plus Ignition and Blaster HVC 2 coil (will include with car, currently has stock coil and ignitor installed)
Greddy Turbo Timer
Exterior:
7/10
Vented CF hood
Unknown Aero (front bumper add-on, side skirts, rear add-ons) all oem type plastic NO FIBERGLASS!
Spoiler (Unknown- looks like ~95 Mustang GT, fits car well)
RARE JDM Riverside Sforza 3pc. Wheels 17x9 all around
Interior:
8/10
S14 black leather seats
rear seats are black leather also, removed but will come with car
Custom 6pt roll cage
Suspension:
KYB AGX adjustable struts
Sleeve Coilovers (unknown brand- dropzone maybe)
Cusco camber plates
front strut bar
http://i211.photobucket.com/albums/bb111/dgms240/5.jpg
http://i211.photobucket.com/albums/bb111/dgms240/2.jpg
http://i211.photobucket.com/albums/bb111/dgms240/2.jpg
http://i211.photobucket.com/albums/bb111/dgms240/4.jpg
http://i211.photobucket.com/albums/bb111/dgms240/1222150308.jpg
http://i211.photobucket.com/albums/bb111/dgms240/jhgu.jpg
Will post more pics soon, these are kinda old.
Please email [email protected] for more info (easiest way to reach me, goes to my phone)
843-902-2600
SERIOUS OFFERS ONLY!! NO LOWBALLS!!!
Car:
1990 240sx hatch
5-Speed
300zx Front brake swap
The last time the car was dyno'd (same setup, stock bottom-end) made 425hp at 22psi, and 380 at 15psi(current tune).
Engine:
KA24DE swap
Block bored .040" and decked
Eagle rods
Wiseco pistons 9:1
Polished crank
Balanced rotating assembly
Head decked to match block
Cometic HG
ARP head and main studs
ARP rod bolts
'91 cams
Master Power 62-1 T4 Turbo (.70/.96)a/r with v-band
HKS wastegate
Turbonetics BOV
Custom Tubular Turbo Manifold
Custom downpipe with flex-pipe
XS Power Exhaust
Custom Aluminum Intake Manifold
Q45 90mm Throttle body
FMIC large w/ custom piping (Don't remember brand of IC at the moment, will edit later)
850cc top feed injectors
Bosch 300lph fuel pump
Stainless lines w/ AN fittings
Aeromotive Filter and FPR
ACT Clutch (4 puck unsprung, extreme pressure plate)
Electronics:
Haltech E6K Full Standalone
Flying Lead harness (tucked)
MSD Digital-6 Plus Ignition and Blaster HVC 2 coil (will include with car, currently has stock coil and ignitor installed)
Greddy Turbo Timer
Exterior:
7/10
Vented CF hood
Unknown Aero (front bumper add-on, side skirts, rear add-ons) all oem type plastic NO FIBERGLASS!
Spoiler (Unknown- looks like ~95 Mustang GT, fits car well)
RARE JDM Riverside Sforza 3pc. Wheels 17x9 all around
Interior:
8/10
S14 black leather seats
rear seats are black leather also, removed but will come with car
Custom 6pt roll cage
Suspension:
KYB AGX adjustable struts
Sleeve Coilovers (unknown brand- dropzone maybe)
Cusco camber plates
front strut bar
http://i211.photobucket.com/albums/bb111/dgms240/5.jpg
http://i211.photobucket.com/albums/bb111/dgms240/2.jpg
http://i211.photobucket.com/albums/bb111/dgms240/2.jpg
http://i211.photobucket.com/albums/bb111/dgms240/4.jpg
http://i211.photobucket.com/albums/bb111/dgms240/1222150308.jpg
http://i211.photobucket.com/albums/bb111/dgms240/jhgu.jpg
Will post more pics soon, these are kinda old.
Please email [email protected] for more info (easiest way to reach me, goes to my phone)
843-902-2600
SERIOUS OFFERS ONLY!! NO LOWBALLS!!!