clutch pressure

[7jpat]

i have no clutch pressure , i had a leak in slave cylinder so i replaced it , still nothing searched and found out i need to remove the loop ( aka damper ) done , but i still have nothing , no leaks any where else paddle drops to the floor like a fly , im wondering if its my master, no matter how many times u pump it , it never gets firm , and what size speed bleeder do i need for slave 8mm x 100 or 8mm x 1.25

[jr_ss]

Have you bled the system at all? Just swapping slaves isnt going to do jack shit, if you don't bleed the system.

[7jpat]

yeah i did but was doing it wrong ,
thanks for the help i got it the only way it worked was to pump and hold open close pull back up and repeat , just one pump at a time , mods delete or lock

[stealthsr20]

Next time take a small piece of vac hose and attach to the bleeder, run hose into a small cup of fluid. Crack bleeder open and pump away! After ten or so pumps close bleeder carefully without knocking off the hose and presto!

Sent from my SCH-R760 using Tapatalk 2