07 Dodge Viper Brembo Calipers!!!!!!

[GRNxS14]

I'm selling a pair of red 07 SRT10 Dodge Viper 4 piston Brembo front brake calipers! These things are in beautiful shape, they were pulled off a friend of a friends Viper after it was totaled at only 10k miles! They had sat around for years until I bought them earlier this year with plans of putting them on my s14. I was going to put them on the car this winter but do to some bad luck and the assinine prices of RB26 parts, I just need money to get my motor back in running condition by next spring :(

These things are pretty baller, and would definitely be one of a kind to mount them on an s chassis. The calipers include an almost brand new condition set of brake pads, all 4 mounting bolts, and both banjo bolts for the brake lines. They will require a bit of brains to find out how to mount them, but for any serious buyer I can share the little bit of info I've come up with in the time I've had them.

http://i49.photobucket.com/albums/f279/zero3307/2012-10-08191812.jpg

http://i49.photobucket.com/albums/f279/zero3307/2012-10-08191827.jpg

http://i49.photobucket.com/albums/f279/zero3307/2012-10-08191843.jpg

http://i49.photobucket.com/albums/f279/zero3307/2012-10-08191905.jpg

http://i49.photobucket.com/albums/f279/zero3307/2012-10-08191959.jpg

Asking $500 shipped! Pm for serious buyers only please!

[Mike - E]

wao0w....bumpers

[Ether240]

Sorry to hear about the motor

[shinobis13hb]

looksto be the same mounting at the rotora calipers and porche calipers. me and my boss made some brackets wasnt to hard at all.

[JBotch79]

sick calipers! Would deff make a dope setup glws

[h2v7]

how can i make these work on my s13

[dawagarage]

^bracket & rotor of correct thickness

[EsChassisLove]

What's the rotor size and thickness of these brakes?

PM me

[Sergio180sx]

Those are badass

[GRNxS14]

Thanks for the comments guys! The calipers are definitely pretty badass, I really don't mind just looking at them on the shelf haha. But unfortunately I think it'd be best for me to pass them along to someone that will make some better use out of them.

To get these on an s chassis you're going to need 3 things, first of which is a rotor. I have the dimensions needed for these, and a couple easy ideas as to where to get ahold of the rotor you're going to need. Second you'll need a set of brake lines, this is the easiest part. Simply find a local hydraulic line shop and they can make them exactly to your specs and won't be very expensive at all. Third is a set of brackets, and that's the hardest part. If you have the right connections with someone that can cnc or machine parts it wouldn't be too tricky. Or find a set of existing brackets like shinobis13hb had mentioned made to fit top mounted brembos to the s chassis knuckle. I know some Porsches use this same style caliper, and possibly a few other cars I don't know about. I know these already exist! I've seen this style of Brembo caliper on an s chassis before, just never specifically the gen3 Viper Calipers which is the cool factor ;)

[SharkMan]

^bracket & rotor of correct thickness

These thi g are so f*cking sick. Very tempting... hmmmm I kinda wanna see if I can get my money right.

[SharkMan]

What rotor would be needed to run these on an s chassis?

[adrians_s13]

whoa... 500 Shipped on these is a steal! mounting bolt is on the bottom tho... I wonder how thats gonna work out

[[email protected]]

Somebody please pick these up! That would sick on a S-Chassis!!!

[shinobis13hb]

Just by the looks of It you could probably use a rotora bracket and rotor! Or just get down and dirty and make one yourself.

[BlewByYou]

What rotor would be needed to run these on an s chassis?

Maybe 370z rotors bc vipers are 14" but 6 bolt.

but then again
Akebono Nissan 370Z Front 4-Piston 14 Inch Big Brake Kit: $849
Nissan Akebono 14" Brake Kits, Hawk Pads, Stoptech Rotors, 370Z Sport - Nissan 370Z Forum (http://www.the370z.com/suspension-brakes/3019-nissan-akebono-14-brake-kits-hawk-pads-stoptech-rotors-370z-sport.html)
0_o

[Keiji z]

I would have bought them by now but your not in cali...It would have looked sick on my 280z. FREE BUMP for you sir

[GRNxS14]

I would have bought them by now but your not in cali...It would have looked sick on my 280z. FREE BUMP for you sir

I can ship!

And for rotors like I mentioned I have a few examples of rotors that would work from other cars. But, a custom set of Wilwood 2 piece rotors would make things super easy and aren't as expensive as you may think ;)

[red s14]

These things are so sick... I've seen them in person, they look like they're almost brand new!!

[GRNxS14]

These things are so sick... I've seen them in person, they look like they're almost brand new!!

Thanks ;) Bump!!!!!!!!!!!!

[gts-r 001]

interested in the calipers!

[bova17]

dey so purdy

[Mofuhcka]

These are ridiculous haha

[GRNxS14]

They're also for sale^^ ;) Thought they were sold but I guess the buyer flaked... ttt

[GRNxS14]

Sold!!!!!!!!!!!!!!!!!!!!!!!!!