95 240sx gauge cluster not working

[streetprototype]

95 Nissan 240sx
s14 sr20det

I've tried to find the answer to this issue and came up with squat. Gauge cluster MPH temp,tach, and fuel just stop working. Worked fine yesterday and this morning. Im stumped! Any help please. Thanks!

[Yellow4g63]

check fuse?

[streetprototype]

Fuse? Didn't know there was one...where is it located?

[Yellow4g63]

Driverside kick panel. It might be the cluster fuse.

[streetprototype]

Thanks I'm going to check that out and if it isn't blown then electrical issue? Where should I start.

[Yellow4g63]

If your car is hella flushed slammed check the harness under the fenders. They will get rubbed by the tires if you don't move them up higher than factory.

[fliprayzin240sx]

On my first S14, I kept popping the fuse. Turned out the power wire supplying 12v for the gauge cluster is grounding out. I cut the wire and routed a different 12v source to it.

[Dagostino480]

any update on this, I am having the same problem

[JBPUSA]

FYI.........not sure if you have done any recent work, but I had blown mine due to unplugging my cluster and leaving the battery connected. it was more of when I was connecting it back, I checked the back of the cluster circuit board and I saw a few burnt lines and the cluster stopped working. So check the back of the clusters board if you have done any recent work, or just to make sure it wasn't the cluster.

___________
Check out our website www.jbperformance.net

[vuez10]

So your saying you basically have to get a new cluster if the lines are burnt