jbballa9876
10-02-2012, 07:42 PM
rb25 stock cams $100
rb25 complete short block: $300- compression was between 150 and 145 on cyl 1-4 but was 120 psi on cyl 5&6
Nissan timing belt used for about 2 months max $50
tensioners used for about a year $60
rb25 valve cover: $65
rb25 coilpack cover: $50
rb25 oil pan: $80
rb25 AC bracket: $35
old school HKS blow off valve- $85. Works well and sounds cool.
steel 1-piesce driveshaft: SOLD
rb25 throttle body: $55
rb25 series 2 MAF: $55
rb25 to s13 harness- would be missing coilpack harness: $SOLD
I still have the plugs for the coilpack harness though it would just need to be wired back together, I used the main plug for the ls1 coilpack conversion.
cas bracket: $35
rb25 spec clutch: good pressure plate but clutch disk ran out of life: $150
rb25 bare block with nothing on it- no pistons rods etc: $150
rb25 crankshaft great condition: $135
q45 front brakeshttp://images.intellitxt.com/ast/adTypes/icon1.png (http://zilvia.net/f/#) calipers and rotors: $100
SPAT jdm front strut tower bar: $125
Tein z32 inner tie rods $50
kazama outer tie rods $50 but heims are completely shot- probably could find some replacements from McMaster or somewhere. Maybe I should keep them for my q45 :)
s13 leather shift boot: $25
rb25 complete short block: $300- compression was between 150 and 145 on cyl 1-4 but was 120 psi on cyl 5&6
Nissan timing belt used for about 2 months max $50
tensioners used for about a year $60
rb25 valve cover: $65
rb25 coilpack cover: $50
rb25 oil pan: $80
rb25 AC bracket: $35
old school HKS blow off valve- $85. Works well and sounds cool.
steel 1-piesce driveshaft: SOLD
rb25 throttle body: $55
rb25 series 2 MAF: $55
rb25 to s13 harness- would be missing coilpack harness: $SOLD
I still have the plugs for the coilpack harness though it would just need to be wired back together, I used the main plug for the ls1 coilpack conversion.
cas bracket: $35
rb25 spec clutch: good pressure plate but clutch disk ran out of life: $150
rb25 bare block with nothing on it- no pistons rods etc: $150
rb25 crankshaft great condition: $135
q45 front brakeshttp://images.intellitxt.com/ast/adTypes/icon1.png (http://zilvia.net/f/#) calipers and rotors: $100
SPAT jdm front strut tower bar: $125
Tein z32 inner tie rods $50
kazama outer tie rods $50 but heims are completely shot- probably could find some replacements from McMaster or somewhere. Maybe I should keep them for my q45 :)
s13 leather shift boot: $25