PDA

View Full Version : S14 to S14A ECU Repin


alonroz
10-02-2012, 08:10 AM
Hi,

I have a Kouki S14 (European Model, LHD, Factory SR20) and a Zenki PowerFC, in order to make it fit Iv'e made a patch harness based on the FSM's:

http://i49.tinypic.com/dgnbl.jpg

Iv'e connected the PFC to the car, initialized the settings, changed the boost control kit to the plus sign, did a sensor check which showed this:


http://i48.tinypic.com/2w6golk.jpg

If i understand it says that everything is ok, but the car simply won't start, it turns but will not fire.

Any input on the wiring or any additional tests that can be done with the PFC to find out what's the problem will be gladly appriciated!


Thanks,
Al

Motary
10-02-2012, 08:33 AM
Did you take care of the NATS?

alonroz
10-02-2012, 10:45 AM
Didn't really think of it...but i don't think it should be a problem - the PFC has no NATS and i'm using the same key anyway - anythign im missing?

koukistylejdm
10-03-2012, 09:21 AM
we had to switch 2 of the ignition coils pinout and 2 injectors also iam pretty sure thats your case

koukistylejdm
10-03-2012, 09:23 AM
your pinout comparaison list doesnt seem right imo but mine was jdm not euro

alonroz
10-03-2012, 09:35 AM
your pinout comparaison list doesnt seem right imo but mine was jdm not euro

Iv'e switched the CAS refrence and position wires and it fired right up!

Thanks!