PDA

View Full Version : CA S14 2JZ Project CHEAP/Open to Trades


PROJECT240SX
09-30-2012, 10:38 PM
Hey guys,

I purchased this car back 02/03 down in San Diego. It was originally an automatic but I did a 5spd swap on it, and eventually went KA-T. The motor let go within 200mi of it being KA-T. After that I decided to pull the motor and tranny and planned on going with a 2JZ swap. I pulled the interior and still have all of the pieces for it. I also removed the front end and have a cleaner white front end for it, minus headlights, turn signals, and hood.

I thought I could hang onto this car to finish it but with family, school and my work I have absolutely zero time to work on the car, so I do not see myself finishing it in the future.


Car:
95 240SX
125,xxx Miles on Chassis
No sunroof
Power windows
Power locks
Battery relocated to trunk
Sound deadening material removed
Z32 N/A VLSD
Walbro 255lph fuel pump



Extras
Nardi 330mm Deep Corn Steering Wheel
Sparco EVO2 Race Seat
Precision FMIC AS1025 600HP (BNIB)
DriftMotion 3" Intercooler Piping Kit (BNIB)
Mishimoto S14 SR Radiator (BNIB)

Engine: (Installed for test fitting)
2JZ Aristo engine
USDM Supra water pump
OEM Toyota serpentine belt
OEM Toyota Timing Belt
No ECU


Transmission/Drivetrain:
R154
1JZ Bell Housing
ARP Tranny to Engine Bolts
OEM Toyota 1JZ Flywheel
ARP Flywheel Bolts
OEM Toyota Clutch Release Hub Kit
DriftMotion Stage 2 Clutch
R154 Clutch Slave Cylinder
Steel Braided Clutch Hose
Custom Extended Shifter Housing



Suspension/BrakesWheels
5 lug swap (no ebrake assembly)
300zx front and rear calipers
300zx NA wheels
Tires are flat

Exterior:
Purple (decent condition)
White front end (not installed, no hood)

Swap kit:
Tech2 crossmember
Tech2 mounts
Custom tranny mount
Custom Steel Driveshaft

Wiring:
S14 KA harness (Excellent Condition)
Aristo harness (Excellent Condition)


I have over $5000 just in the swap and parts that I have for this car. This is a great project car for some one looking to take on a project and has the free time.





Located in Salinas,CA


SOLD


You will need a trailer to pick up the car


Excuse the dust, webs and dirt I had the car sitting outside in the back of my house before bringing it in to work on it.


http://i40.photobucket.com/albums/e237/SpulnKA/IMG_3242.jpg
http://i40.photobucket.com/albums/e237/SpulnKA/IMG_3243.jpg

Sr20KoukiS14
09-30-2012, 10:55 PM
$48000 sounds reasonable lol.

Twinkies!
09-30-2012, 11:33 PM
48 grand? Lol

s14gmo
10-01-2012, 12:35 AM
will you take 30gs dont want to lowball you lol glws

Fedex_562
10-01-2012, 12:54 AM
4800?........

PROJECT240SX
10-01-2012, 06:02 AM
$48000 sounds reasonable lol.

48 grand? Lol

will you take 30gs dont want to lowball you lol glws

4800?........


Pricing has been corrected, refer to original post.

d_nice
10-01-2012, 09:12 AM
looks like alot of work needs to be done

Boost-Fiend
10-01-2012, 10:10 AM
what kind of trades u lookin for?

PROJECT240SX
10-01-2012, 12:18 PM
what kind of trades u lookin for?

Open to any and all trades as I will probably sell whatever it is.

Boost-Fiend
10-01-2012, 07:08 PM
How bout a rb swapped s13 coupe Silvia front widebody 5 lug all the suspension full cage?

Spencer dougherty
10-02-2012, 12:31 AM
who ever picks this up.. i can complete the swap for a few 100 buxs if need.. good deal on this..

alisak
10-02-2012, 03:44 PM
would you part out?

RitchieBoost914
10-02-2012, 11:21 PM
If you decide to part it out please let me know, im interested in a few things you have.
My email: [email protected]

PROJECT240SX
10-02-2012, 11:30 PM
would you part out?

If you decide to part it out please let me know, im interested in a few things you have.
My email: [email protected]


Not interested in parting out, only way I would consider parting the car out is if someone takes the engine/tranny package first. Unfortunately, everyone that PM's me is interested in small parts or the driveshaft.

I would rather continue to let the car collect dust in the garage than to take off little pieces here and there to sell until the car is gone.

RitchieBoost914
10-02-2012, 11:45 PM
Email me a price for the motor/trans combo with and without engine harness, thanks alot

alisak
10-05-2012, 05:38 PM
Email me a price for the motor/trans combo with and without engine harness, thanks alot

if he takes the motor/trans ill take the front mount, piping, drive shaft.

alisak
10-14-2012, 11:15 AM
bump it up

Syncade
10-24-2012, 11:01 AM
Im interested in motor and trans (would need shipped obviously). PM me if youd be interested (id want motor, trans, and harness's)

alisak
10-24-2012, 01:03 PM
pm me back

PROJECT240SX
10-24-2012, 10:13 PM
Car has been sold.