thread pitch on this?

[paintkilz]

i just got a 15/16 BMC to replace my ABS BMC and delete the abs altogether in my 95 s14...

however i have ran into an issue...

my BMC has its 2 ports up front for front wheels, the bottom port to go to the rears and a bleed screw at the firewall side of the BMC..however in between the front ports and the bleed screw is a smaller threaded hole...which cant be m10 like the other ports..maybe a M7? anyways i need to plug this hole for my install and i dont have a thread mic that can check this...anyone have an answer?

sorry the image is upside down...i didnt have to time to edit and flip it before i leave for work...

thanks for the assistance guys! full build thread as soon as im home too!

it would be the port next to the "p" and also are bleed screws on the master common? this is the first time ive ever came across it..

http://i50.tinypic.com/2jaj7g6.jpg

[paintkilz]

40 views and no one has an idea?

[slydin240sx]

Just be patient. Someone will chime in if they know.

[benarovi]

yes bleeder screws are common on a master cylinder
dont know the thread pitch but try and find someone with a thread pitch gauge that will fit in that hole.
if you wantgo to ACE Hardware and find a bolt that will fit it since you jsut need to plug it.

[Punished]

yes bleeder screws are common on a master cylinder
dont know the thread pitch but try and find someone with a thread pitch gauge that will fit in that hole.
if you wantgo to ACE Hardware and find a bolt that will fit it since you jsut need to plug it.

That is what I would do. You need to buy a bolt anyway, so take it with you to the hardware store and see what fits.

[EhrikETFG]

prolly not a m7 tho