ka24e to sr power steering

[cnazzaro240]

I know the lines dont match up, but if I buy the isis or spl high pressure line will it eliminate the problem? or do I need to do something else? I've been looking just for an entire DOHC line set but I cant find anything. Thanks

[BlacknboostedS13]

if you're talking about the power steering lines, the SOHC ones work they're just on the wrong side of the engine bay. If you're in a pinch for time/money and just want it to work, you can bend the hardlines to get the high pressure banjo fitting to bolt up to the pump and mount your res. on the drivers side. Otherwise, the DOHC is the best/cleanest way to go. Both work.

[cnazzaro240]

if you're talking about the power steering lines, the SOHC ones work they're just on the wrong side of the engine bay. If you're in a pinch for time/money and just want it to work, you can bend the hardlines to get the high pressure banjo fitting to bolt up to the pump and mount your res. on the drivers side. Otherwise, the DOHC is the best/cleanest way to go. Both work.


I just bend them by hand? i just dont want to break them lol

[Darren]

I just bend them by hand? i just dont want to break them lol

you can buy cheap brake line benders at any parts store that will allow you to bend it without breaking/kinking it.

[cnazzaro240]

okk thanks alot guys!

[ejbluth]

Kind of an old bump, but do you move the reservoir over to the driver side as well?

[BlacknboostedS13]

Yea, but you can only get 1 bolt to fit. It takes some modification to get the sohc res to fit. You're better off buying a Dohc res, unless you're low on funds then you can make it work.