milo2191
09-26-2012, 04:57 PM
I'm tired of this thing I have had it for 2 months and have no job and I don't have funds to finish it.
To start,
This is kenjis old formula drift car.
It is 85% done.
All it needs to run is a oil pan. The one I made is just not wanting to fit unless I remake my mounts.
She'll info,
FD spec cage with approval stickers still on it
BMagic 50mm over rear fenders.
Walbaro 255 fuel pump installed
Wiring has been Completly pulled just need to run fuel pump and taillight wires and headlights. It is ran with 3 toggle switches and retains stock ignition key.
I have the full chassis harness that I will include.
The clutch pedal has been remade so res and master are in the car due to the LS heads come so far back.
I have done the hard part by finding and buying all the fittings you need. They are all installed on the motor or where they are needed.
6ft custom russel powersteering line with correct fittings.
New brake pads all around.
Welded diff
Both axles
Newer Godspeed type RS coilovers
Corvette fuel components and lines ran and are complete
Motor set info
Motor was in Carlos my friends 240 tuned by battle ground on 9lbs and was 400/400 but Now has the ls1 cam
5.3 iron block
All F-body accessories
Clocked water pump neck to clear exhaust
New head gaskets
Ls1 cam
#82 injectors. They are huge but plenty of room for more boost
Trunk manifolds flipped and one clocked.
All piping made
Master power t72 turbo. Like new. Spins great
Godspeed 38mm waste gate 9lb spring to open dump
Cxracing I believe radiator
Xspower intercooler
Real hks ssqv gen 3 bov
New ls6 clutch and flywheel
New and rebuilt and resealed t56 trans.
Full harness wired to one switch
Things you need,
driver fender
Hood but I might have one.
Headlights
And rear bumper
Driveshaft
Things I will include,
Rear 300zx full 5lug assemblies with cables
All ls parts I have
Extra cam.
Old accessories
All rhd parts I have from the car.
I'm asking 10k but would rather trade for 350z, or 240s but offer away
I really do not know how to price it but I feel that is good for a car that all you need todo is gptake or buy a oil pan.
My names mike,
770733-4526
The turbo has been clocked up and higher for the turbo drain
http://i452.photobucket.com/albums/qq244/mike2191milo/20120822_185839-1.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_195959.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200019.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200054.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120922_133709.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120824_202240.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120824_202219.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200012.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200029.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200036.jpg
To start,
This is kenjis old formula drift car.
It is 85% done.
All it needs to run is a oil pan. The one I made is just not wanting to fit unless I remake my mounts.
She'll info,
FD spec cage with approval stickers still on it
BMagic 50mm over rear fenders.
Walbaro 255 fuel pump installed
Wiring has been Completly pulled just need to run fuel pump and taillight wires and headlights. It is ran with 3 toggle switches and retains stock ignition key.
I have the full chassis harness that I will include.
The clutch pedal has been remade so res and master are in the car due to the LS heads come so far back.
I have done the hard part by finding and buying all the fittings you need. They are all installed on the motor or where they are needed.
6ft custom russel powersteering line with correct fittings.
New brake pads all around.
Welded diff
Both axles
Newer Godspeed type RS coilovers
Corvette fuel components and lines ran and are complete
Motor set info
Motor was in Carlos my friends 240 tuned by battle ground on 9lbs and was 400/400 but Now has the ls1 cam
5.3 iron block
All F-body accessories
Clocked water pump neck to clear exhaust
New head gaskets
Ls1 cam
#82 injectors. They are huge but plenty of room for more boost
Trunk manifolds flipped and one clocked.
All piping made
Master power t72 turbo. Like new. Spins great
Godspeed 38mm waste gate 9lb spring to open dump
Cxracing I believe radiator
Xspower intercooler
Real hks ssqv gen 3 bov
New ls6 clutch and flywheel
New and rebuilt and resealed t56 trans.
Full harness wired to one switch
Things you need,
driver fender
Hood but I might have one.
Headlights
And rear bumper
Driveshaft
Things I will include,
Rear 300zx full 5lug assemblies with cables
All ls parts I have
Extra cam.
Old accessories
All rhd parts I have from the car.
I'm asking 10k but would rather trade for 350z, or 240s but offer away
I really do not know how to price it but I feel that is good for a car that all you need todo is gptake or buy a oil pan.
My names mike,
770733-4526
The turbo has been clocked up and higher for the turbo drain
http://i452.photobucket.com/albums/qq244/mike2191milo/20120822_185839-1.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_195959.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200019.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200054.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120922_133709.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120824_202240.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120824_202219.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200012.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200029.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20120920_200036.jpg