PDA

View Full Version : PA z32 and s13 vh45 swap kits


Future_gohan
09-23-2012, 02:41 PM
So I'm doing a vh45 swap for a customer in an s13 and want to sell a swap kits to the public.

The kit for the s13 will include:

Motor mounts.
Transmission mount.
High pressure PS line(Stainless).
Drive shaft(One piece steel)
Headers(Shorty's 2.5" Collectors). *Can change depending on build

For the z32:

Mounts.
Modified crossmember.
modified transmision mount.
Power steering line(stainless).

Best thing about my z32 kit is it uses a non modified oil pan so you will have 0 oil issues and the pan is level with the crossmember.

http://i834.photobucket.com/albums/zz266/driftiskool/544965_10150869738889599_418665032_n.jpg

Will post better pictures in a little bit. Trying to see what interest is out there for this. Thank you!


My apologies, i forgot prices.

Here are the prices seperate:

Engine Mounts - 150.00 + Shipping

Driveshaft - 275.00 + Shipping

High Pressure Power steering line - 110.00 Shipped

= 535.00 If bought all at one time 550 Shipped!

Headers will range from 300.oo - 600.oo depending on what setup you would like to have. (Which is between, short and long tube, 2.5" or 3" Collectors)

The Z32 Will only be 450.oo SHIPPED. Because You will need to send me your crossmember and trans mount to modify.

polarpop
09-23-2012, 04:25 PM
sir what would this kit run for the s13 coupe thank you

Future_gohan
09-23-2012, 05:21 PM
My apologies, i forgot prices.

Here are the prices seperate:

Engine Mounts - 150.00 + Shipping

Driveshaft - 275.00 + Shipping

High Pressure Power steering line - 110.00 Shipped

= 535.00 If bought all at one time 550 Shipped!

Headers will range from 300.oo - 600.oo depending on what setup you would like to have. (Which is between, short and long tube, 2.5" or 3" Collectors)

The Z32 Will only be 450.oo SHIPPED. Because You will need to send me your crossmember and trans mount to modify.

iknowaghost
09-24-2012, 07:40 AM
i am assuming your swap would require a z32 trans, are you going to be doing the harness work yourself? i have an s13 that i am planning this swap for and would greatly appreciate whatever pictures you could post thanks

Future_gohan
09-24-2012, 07:53 AM
i am assuming your swap would require a z32 trans, are you going to be doing the harness work yourself? i have an s13 that i am planning this swap for and would greatly appreciate whatever pictures you could post thanks

You would just have to send me the harness for me to modify, but yes I can do a turn key wiring harness.

And It will use a z32 transmission. Currently I don't supply the transmission adapter, but these mounts will use the Xcessive transmission mount.

OLDSCHOOLRICER
09-24-2012, 08:18 AM
anything for the s14? I'm ready to do a 1uzfe swap with ka trans but this is also a option I've had in mind. any pics of the headers?

Future_gohan
09-24-2012, 08:41 AM
If i had an s14 or someone local who was doing a vh swap i could easily make the swap kit, but until then I do not have an option to do it in an s14 sorry.

getsideways
09-24-2012, 09:15 AM
Buyers beware ... I have seen this guys work and it's self taught and less than satisfactory.

He has also bought things from me and never paid me in full! You have been warned

Future_gohan
09-24-2012, 09:31 AM
We squared that away well over a year ago bud, you got paid.

OLDSCHOOLRICER
09-24-2012, 09:44 AM
1uzfe it is then. lol thanks bro

Future_gohan
09-24-2012, 09:50 AM
1uzfe it is then. lol thanks bro

No problem, the 1uz is an awesome motor but only issue with your setup is I don't know how much it would like the ka transmission, as they're so weak. I would think the z32 or z33 transmission or even the r154 would be a much better setup?

OLDSCHOOLRICER
09-24-2012, 10:08 AM
nah. there's more then enough people rocking the Kane/Sr trans drifting and what not. and I can still use my stock driveshaft.

nismoninjagtr
09-27-2012, 11:18 AM
Would the headers go to the s13 cat and bolt right up?

Future_gohan
09-27-2012, 12:04 PM
Would the headers go to the s13 cat and bolt right up?

They would not, I would have to make a Y pipe and even then where you have to Y it off at would be far after the cat past the tail shaft of the transmission.

jhaas
10-23-2012, 11:05 AM
I'm interested!! Sent ya a pm

3411
05-06-2013, 12:12 PM
great guy i was gunna get the swap from him a while back but i hit a camaro and hand to spend the $ fixing that :(

comunication was great when i get some extra $ im deff getting a set up

zenki 95
05-13-2013, 05:05 PM
Pm'd no reply

c-los13
11-22-2013, 12:21 PM
got any pics of the headers!
id love to get a pair if the price is reasonable