LS1 240sx vert *knock* 12,000 obo

[jkettell]

just dipping my feet in some water right now unless there are some serious inquires
the car is a 1994 nissan 240sx convertible with a sweet ls1 swap
boom lets get down to the parts first though
stance coilovers
nissan 350z wheels
5 lug conversion
z32 brakes front and rear
s14 seats
fancy headunit
lets get down to the real business
2004 pontiac gto motor 57,000 miles
2002 pontiac trans am t56 that was freshly rebuilt right before the car was totaled that it was taken out of (shifts like butter)
ls7 clutch and flywheel
new slave cylinder
sikky swap kit:
-motor mounts
-trans mount
-oil pan
-oil filter relocation
-1 piece driveshaft
-power steering lines
-clutch master cylinder
-long tube headers ceramic coated (needpowdercoating.com)
-remote clutch bleader
-front sway bar *not installed*
valve covers powder coated wrinkle black
custom tucked conversion harness from jordaninnovations
walbro 255lph fuel pump
corvette fuel filter has a built in regulator
welded diff
mishimoto radiator
mishimoto slim fans
new alternator
new serpentine belt
brand new Bosch o2 sensors
exhaust custom Y pipe to a 3in apexi noir catback (sounds gnarly)
the y pipe is band clamped to the headers vband to the catback
it is routed to be even with the frame rails
brand new spark plugs
brand new wires
new battery
dakota digital box to adjust the speed
has obdII port
front strut tower brace
car is running and currently is my daily driver

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/564725_10152068037185300_397419879_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/487838_10151964661095300_1974622459_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/s720x720/378554_10150942473990300_1197355541_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/s720x720/545667_10151411140360300_1021396378_n.jpg

[DeWitt]

Bump for a clean vert,all new parts,good seller!

[mindlessly_me]

Good luck man! Awesome car great deal!

[GSXRJJordan]

John's Mil-spec engine harness is top-notch, as are the rest of the parts he used. This is a fuckin' steal.

[jkettell]

Bumppppppoppp

[GeorgeBlahh]

bump

if your trying to part anything out im interested in the mounts pan tranny driveshaft clutch and flywheel.

[RBpwrd]

Nice car!!

I'm not an expert, but I am pretty sure that remote mounted oil filter shouldn't be upside down and that may have helped contribute to your rod knock. I know that engines have oil pressure, but every time you turned it off that put an air bubble in your oil lines and could have starved the rod bearings.

[GSXRJJordan]

Nice car!!

I'm not an expert, but I am pretty sure that remote mounted oil filter shouldn't be upside down and that may have helped contribute to your rod knock. I know that engines have oil pressure, but every time you turned it off that put an air bubble in your oil lines and could have starved the rod bearings.

I'm glad you prefaced your statement that way, because the orientation of the oil filter has no bearing on anything. Any decent filter has an anti-drainback valve, and if you've ever changed an oil filter that's "upside down" and noticed that not much oil comes out of it you'd know.

Also, every engine experiences a dry start unless you pre-oil (Accusump or similar), and doesn't appreciably degrade bearings because the loads are so light during startup.

Your reasoning is sound, but this is something we talk about with everyone that buys a swap kit or remote oil filter mount, and we've done hundreds over the years.

[jkettell]

I'm glad you prefaced your statement that way, because the orientation of the oil filter has no bearing on anything. Any decent filter has an anti-drainback valve, and if you've ever changed an oil filter that's "upside down" and noticed that not much oil comes out of it you'd know.

Also, every engine experiences a dry start unless you pre-oil (Accusump or similar), and doesn't appreciably degrade bearings because the loads are so light during startup.

Your reasoning is sound, but this is something we talk about with everyone that buys a swap kit or remote oil filter mount, and we've done hundreds over the years.

thank you very much jeff jordan.
the rod knock came from something else i will sell this car with a block and heads from a 99 corvette with 44k miles on it for 14000.
then it would just be swapping the parts over.

[jkettell]

13,000 last price drop and bump will have the motor for it by the weekend

[jkettell]

bump have a motor for it just needs to be swapped

[Huntsman2007]

Entertaining Trades? Rb25 vert?

[redhatchy92]

What a steal. I wish I had the funds.

[jkettell]

Entertaining Trades? Rb25 vert?

Would you be willing to put money on top?

[Huntsman2007]

Pm sent to ya!

[jkettell]

I replied to your pm

[miamiman323]

Wish i was in the market for something that needs a little work because this things beautiful. GLWS i hope someone fixes this beast up and enjoys it.

[jkettell]

Wish i was in the market for something that needs a little work because this things beautiful. GLWS i hope someone fixes this beast up and enjoys it.

As of now it's looking like I'm gonna be fixing it and keeping it and thanks mang

[Danial]

WANT. Beautifully done.

[jkettell]

WANT. Beautifully done.

it is forsale haha and thank you

[jkettell]

To the top

[Huntsman2007]

Sent another pm your way

[jkettell]

Still forsale to the top

[D.Adams]

I'm glad you prefaced your statement that way, because the orientation of the oil filter has no bearing on anything. Any decent filter has an anti-drainback valve, and if you've ever changed an oil filter that's "upside down" and noticed that not much oil comes out of it you'd know.

Also, every engine experiences a dry start unless you pre-oil (Accusump or similar), and doesn't appreciably degrade bearings because the loads are so light during startup.

Your reasoning is sound, but this is something we talk about with everyone that buys a swap kit or remote oil filter mount, and we've done hundreds over the years.


BOOM HEAD SHOT !!!


My 13b filter is upside down never once had a issue with it.

GLWS Wish i would of held onto my ls 240.

[jkettell]

BOOM HEAD SHOT !!!


My 13b filter is upside down never once had a issue with it.

GLWS Wish i would of held onto my ls 240.

I think I'm gonna wind up keeping it. Thank you doe

[jkettell]

KEEPING THE CAR MODS please close the thread

[Huntsman2007]

KEEPING THE CAR MODS please close the thread

Awesome choice man! You won't regret it!

[outlawstar1023]

did you buy this car from Someone in queens, with an trade for an limited edition gallant?

[P-Funk alot]

sounds like a steal just wish it wasnt a vert

[jkettell]

did you buy this car from Someone in queens, with an trade for an limited edition gallant?

I'm pretty sure the kid before me did. He was up in north jersey I'm in south