95 S14 KA-T partout AEM Comp Turbo 1650cc

[z3nk1dr1ft]

Hey,


$4000 for the whole car.


I am parting out my 95 KA-T car.

140k on base model shell. 4 lug. green If you want the shell, $1500 Clean TN title.


** SOLD**
BOV, Wastegate, FPR, Head.

Still for sale:
16" Motegi wheels with new Khumo ASX tires $400
ACT 6 puck unsprung extreme (NIB) $275
Megan Short Throw Shifter $50
AEM EMS V1 2nd edition. for 95 $700
AEM 10 channel Injector driver $125
AEM UEGO wideband $125
Greddy boost gauge with electric sending unit $80
Autometer oil pressure gauge $20
top feed fuel rail $50
1650cc marren injectors $125
braided lines from rail to FPR $20
FMIC $150
All piping $75
3" DP $75
tubular manifold $150
comp t4 triple ball bearing turbo( no shaft play) $700
Build bottom end. 30psi compression on cylinder 3(wiseco pistons, eagle rods, acl bearings ARP everything, needs rings i think) $600
HKS turbo timer $50
manual boost controller $25
s14 distributor with AEM wheel $50



and whatever else is on the car..

car dynoed 520rwhp then put about 500 miles on it and lost compression on cylinder 3.. no scoring on the walls.

I will sell the whole car for $4000 obo as it sits with the head pulled off. Did run and drive before i pulled the head. I have receipts for almost everything.

http://i19.photobucket.com/albums/b153/z3nk1dr1ft/IMG_20120424_180239_zps28be764b.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/IMG_20120424_180226_zpsc9da2b65.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/IMG_20120424_180154_zpsdcfc787d.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/enginebay1_zps549ddb64.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/turbo_zps7cfec76d.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/interior_zps123dbaa1.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/aemstuff_zpsd0d1c6d6.jpg

[Vadim's13]

Would u part out rods bro?

[z3nk1dr1ft]

Would u part out rods bro?

I really don't have a good place to work on the car. I cant pull the motor becuase its parked on gravel/grass and my cherry picker wont do the trick there.

If I had a place to work on the car I would probably fix it and hit road atlanta some more.

So unfortunately... The bottom end is staying together for now.. Maybe with a little more interest in the bottom end I can get it pulled out somehow.

[slipnslide88]

Willing to sell that radio bezel and custom center section? Maybe the shell?

[z3nk1dr1ft]

Yes I will sell the radio bezel and shift knob area cover thing. and the shell is for sale as well. I will take $2500 obo for the shell i suppose. Clean title in hand. Comes with wheels and coilovers. Pretty much a solid roller. It has an aftermarket diff in it but I cant remember what kind right off. has subframe collars as well. Will also include the downpipe back exhuast.

[slipnslide88]

How much for radio bezel and the custom radio holder thing? What coilovers are on the shell and what kind of wheels are those?

[slipnslide88]

I just looked at the pics better I don't need the shifter thingy just the radio part

[d_nice]

good stuff here man

[fakieSI]

Is the tial v band or bolt style?

[z3nk1dr1ft]

Is the tial v band or bolt style?

38MM bolt on style.


And a correction for the top. The AEM EMS is V2

[aznbikerboyz]

you got PM

[xs420240sx]

any way you could post a better picture of the fuel rail setup? may be interested in the rail.

[dato]

You have PM

[z3nk1dr1ft]

any way you could post a better picture of the fuel rail setup? may be interested in the rail.

Yeah.. Gimme a little bit. About to go to a wedding. I will post more pictures later tonight.

[z3nk1dr1ft]

http://i19.photobucket.com/albums/b153/z3nk1dr1ft/wastegate.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/fuelrail.jpg


more pics of requested items.

[z3nk1dr1ft]

Any takers on anything? Prices are OBO.

[byrd82]

Need that AEM! !!!!! Which one exactly is it? I know some of the later EMS 1, came with black case and were known as version 2. Then there is the EMS 2, which all come black.

[Slims]

sad to see this thing taken apart, looked like a fun car and some good numbers. what did ya crank the boost to?

[z3nk1dr1ft]

Need that AEM! !!!!! Which one exactly is it? I know some of the later EMS 1, came with black case and were known as version 2. Then there is the EMS 2, which all come black.


http://i19.photobucket.com/albums/b153/z3nk1dr1ft/aemserial.jpg

[nismoracingsx]

pm'd about a few parts.

[z3nk1dr1ft]

$5000 takes the whole car.

[z3nk1dr1ft]

Updated pricing. Everything sold as-is. OBO!

[Memberofthe600hpkaclub]

What size are those a.n. lines to the fpr look like -8 but I can't tell

[z3nk1dr1ft]

What size are those a.n. lines to the fpr look like -8 but I can't tell

I am terrible with AN size lines.. I THINK its an -8 also. about 80% sure.

[Memberofthe600hpkaclub]

Does the gauge come with the reg? I'll buy both if you will do 110...also can you post a close up pic of it and the line? Or text it to me at 850 572 1401

[z3nk1dr1ft]

http://i19.photobucket.com/albums/b153/z3nk1dr1ft/reg.jpg

[DailyDrivenS14]

phone number to contact you, im in nashville

[Vi3tSR20DET]

Brand of the MBC and is it a ball/spring MBC? maybe PM me a pic? willing to ship? ..94591

[z3nk1dr1ft]

Brand of the MBC and is it a ball/spring MBC? maybe PM me a pic? willing to ship? ..94591

Its a no name ebay one. Not sure of the ball and spring deal. I'll throw a pic up tomorrow.

[z3nk1dr1ft]

NEW PRICE! $4500 takes it home.

[z33slammin]

Hmu if you have the madder window switch

Sent from my SPH-D710 using Tapatalk 2

[Colloquialisms]

dibs on MAF

[z3nk1dr1ft]

@ Colloquialisms: No MAF on the car. MAP sensor.
@ z33slammin: Not sure what you mean by madder window switch? Assuming the master switch?

[godrifttoday]

If you were local I would buy the everything, how much for just the cams?

[z33slammin]

Yeah the master and the passenger.shipped to 77449

Sent from my SPH-D710 using Tapatalk 2

[z3nk1dr1ft]

If you were local I would buy the everything, how much for just the cams?

I want to keep the head intact since it was built and clearanced for those exact cams.. The head wouldnt be worth anything to anyone else .


Yeah the master and the passenger.shipped to 77449

Sent from my SPH-D710 using Tapatalk 2

I'd like to keep the shell intact as possible.

[allenms240]

Still have the turbo timer? Any pics?

[sdennisp27]

Wondering how much for just the turbo kit?

[z3nk1dr1ft]

Wondering how much for just the turbo kit?

More specifically which parts?

Still have the turbo timer? Any pics?

Yes I still have it but no close up pics.

[bmitchell_ga]

I might be interested in motor and head if you are willing to make a deal.

[silviaNC]

How much for the dash harness with the relays and fuse box on driver side kick panel. Need it asap

[s13mikesr20]

Injectors what impedance r they must know sir

[z3nk1dr1ft]

I might be interested in motor and head if you are willing to make a deal.

What kind of deal did you have in mind? Shoot me a PM.

How much for the dash harness with the relays and fuse box on driver side kick panel. Need it asap

Don't want to tear the interior apart for that. Sorry.

Injectors what impedance r they must know sir

They are low impedance.

[trevor34]

Sent PM...

[z3nk1dr1ft]

Updated prices! Buy it up!

[Colloquialisms]

What kind of MBC is on it? Very interested; PM me and we'll work a deal out.

[dreek93sr20]

how much for wideband and boost controller shipped to 29150

[Otaku]

PM me the dimensions/brand of the intercooler. Thanks.