Silentoreo34
09-19-2012, 10:44 AM
Alright, so plan on going a different route with my car and well planning on selling my sr I put in a few months ago.
Not looking to part don't ask, if you ask I will no reply
Motor is still in car and will stay in car till I have a locked in buyer then motor will be pulled in about a week.
Full swap details
All parts/motor have about 1500 on them and will go up as I drive it.
SR20 redtop
Rebuilt by classone machine shop (Have all papers-Including specs) Stock rebuild ACL racebearings/oem rings full headwork.
OEM gasket rebuild kit
ARP headstuds
Cosworth metal headgasket
810cc deschwerk injectors
Custom 3 inch intake system with Z32 maf
Nistune-Tuned for 1 bar with Z32 maf by Armondo at ILL garage car made 302whp(on a dyno dynamics) motor can make more, but put it at 1 bar for start.
GT2860rs(Disco potato) 3inch intake with .86 turbo side turbo setup for externial wastegate so hotside is welded shut
Stock exhaust modded for externial wastegate by codyace on here.
DIF bottom mount stainless steel turbo lines
38mm Tial wastegate(purple)
Drift freaq motor mounts (Green) Motor+trans mounts
Rare moon face downpipe.
5 speed trans(feels good shifts good)
1 piece clutch line
exedy stage 2 3 puck clutch (not to soft/not to hard just right)
OEM ka rad with sr20 fan shroud+clutch fan+cross over hoses
cross over heatercore hoses
wiring specialties sr20 red to s13 engine/trans harness
Circuit sport coolant catch can.
Price-$3000 Firm
Once again not going to part.
Will be doing a compression test tonight and posted results also can do a following compression test in person if needed.
All that is needed to complete the swap is intercooler, bov, walbro, and driveshaft.
Willing to accept a complete and good running dohc ka +cash for the sr swap.
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_5946_zps56507cbf.jpg
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_7424_zpsb33e14db.jpg
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_2947_zps09f54eaa.jpg
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_4158_zps70187d78.jpg
cylinder #1
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_0466.jpg
cylinder #2
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_7315.jpg
cylinder #3
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_4020.jpg
cylinder #4
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_9074.jpg
Not looking to part don't ask, if you ask I will no reply
Motor is still in car and will stay in car till I have a locked in buyer then motor will be pulled in about a week.
Full swap details
All parts/motor have about 1500 on them and will go up as I drive it.
SR20 redtop
Rebuilt by classone machine shop (Have all papers-Including specs) Stock rebuild ACL racebearings/oem rings full headwork.
OEM gasket rebuild kit
ARP headstuds
Cosworth metal headgasket
810cc deschwerk injectors
Custom 3 inch intake system with Z32 maf
Nistune-Tuned for 1 bar with Z32 maf by Armondo at ILL garage car made 302whp(on a dyno dynamics) motor can make more, but put it at 1 bar for start.
GT2860rs(Disco potato) 3inch intake with .86 turbo side turbo setup for externial wastegate so hotside is welded shut
Stock exhaust modded for externial wastegate by codyace on here.
DIF bottom mount stainless steel turbo lines
38mm Tial wastegate(purple)
Drift freaq motor mounts (Green) Motor+trans mounts
Rare moon face downpipe.
5 speed trans(feels good shifts good)
1 piece clutch line
exedy stage 2 3 puck clutch (not to soft/not to hard just right)
OEM ka rad with sr20 fan shroud+clutch fan+cross over hoses
cross over heatercore hoses
wiring specialties sr20 red to s13 engine/trans harness
Circuit sport coolant catch can.
Price-$3000 Firm
Once again not going to part.
Will be doing a compression test tonight and posted results also can do a following compression test in person if needed.
All that is needed to complete the swap is intercooler, bov, walbro, and driveshaft.
Willing to accept a complete and good running dohc ka +cash for the sr swap.
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_5946_zps56507cbf.jpg
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_7424_zpsb33e14db.jpg
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_2947_zps09f54eaa.jpg
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_4158_zps70187d78.jpg
cylinder #1
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_0466.jpg
cylinder #2
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_7315.jpg
cylinder #3
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_4020.jpg
cylinder #4
http://i1092.photobucket.com/albums/i401/silentoreo/IMG_9074.jpg