Leftover parts from my 180sx

[sr20drifter1]

Parting out my 240sx. It was built with nice parts. It’s time for me to let her go. Please email me if you need any of those parts. Thanks.
Here is what I have left:
Aftermarket parts (all prices are obo and do not include shipping)
-HKS Short shifter $399 (very hard to find)Best short shifter that I’ve seen. No rattle like B&M.
-Very rare Tomei GTR shift knob $119
- HKS type R front mount intercooler with pipes for s13(Biggest HKS intercooler) bought new from FRsport.com . $749
- Greddy oil relocation kit and oil cooler kit with thermostat $499
- Greddy Radiator for S13 with temp sensor. $429
Suspension, brakes and wheels
- Cusco rear triangular strut bar$199
- R32 GTR (http://zilvia.net/f/) front brake calipers and rotors $299
- Pair of Volk 18x8.5 +30 offset CE28N-L with 245-40-18tires. Tires are almost done $699. These go for more than $700 a piece new.
- Like new tires kumho ecsta 215 40 17 $149 and yokohama avs 235 40 17 $149
- Nismo Pro GT LSD in R200 pupmkin $799.Less than 300 miles on it.Will come with 5 bolt axels
Exterior:
- S13 Hatchback More Collage wing ( Rare: I owned the only two that I’ve ever seen in the US) $499
- Rare 180sx rear valances. These valances flow much better with 180sx kit $219
- S14 More Collage wing ( Rare: maybe the only one in the States) $549
- Nardi deep dish 330mm steering wheel bought new from Touge Factory $229
- Complete Custom Broadfield defi set up $1,399 or individually
- 80mm Turbo gauge $249 shipped
- 80mm Tach gauge 9k rpm $159 shipped
- 52mm engine pressure $249 shipped
- 52mm engine water temp $159 shipped
- 52mm engine oil temp $159 shipped
- 52mm fuel pressure $249 shipped (black face)
- 52mm EGT $249 shipped
- DEFI LINK Control $109 shipped
- Digital fuel gauge $139 shipped with custom bezel.
- Alpine dvd player with navigation system $499
More Parts:
- Full Race exhaust manifold $699. They don’t make these anymore.
- Ikeya Formula FLCA $299
- Greddy hand free boost controller $99
- Rear 5 lug conversion $99
- ’98 sr20det transmission in pretty good condition. No grinds. $249
- In very good condition Exedy stage 2 clutch with fly wheel $309
-Apexi BOV. Similar design to Greddy type r $149
-Veilside Evolution Turbo design oil cap with Veilside Evolution shift knob $139
-ARC Tension rods in black. My last set $129
-sr20det jdm harness complete with fuse boxes $109
-180sx digital odometer cluster $89
The site could not let me upload all the pictures. I'll be posting pictures by request. You can also check my previous for sale threads for pics.
Thanks.

[sr20drifter1]

I've reduced prices on a lot of parts. All pms replied.
Deal on the spoiler and valances if bought together:
http://i197.photobucket.com/albums/aa291/sr20drifter1/027.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/100.jpg

Wing is sold!!!

[180sx?]

pm sent...

[sr20drifter1]

S13 Bezel with digital fuel gauge: SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/057.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/059.jpg

Ikeya FLCA:SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/049.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/048.jpg

Greddy hand free for Greddy boost controller:SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/053.jpg

Cusco strut bar:SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/051-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/050.jpg

GTR32 front brakes:
http://i197.photobucket.com/albums/aa291/sr20drifter1/044.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/036-1.jpg

Greddy radiator:
http://i197.photobucket.com/albums/aa291/sr20drifter1/016-5.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/015-5.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/014-6.jpg

DIF dual fan controller: SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/014-5.jpg

[1slicktwo4oh]

Temp sensors GReddy? If so part w/ temp Sensors, shipped to 90011. Pics of Veilside stuff Please

[Edwin562]

price on the DIF unit.

[sydwayzSil80]

pics of the veilside cap and shift knob and the apexi bov?

[sr20drifter1]

http://i197.photobucket.com/albums/aa291/sr20drifter1/006_zpsc353b280.jpg
SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/004_zps5ebe8202.jpg

All pms replied.

New Nissan sr20det valve cover gasket $old. It will come with the spark gaskets. I bought it new from Nissan in VA.
http://i197.photobucket.com/albums/aa291/sr20drifter1/014_zps1d2fd8b2.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/017_zps30fb56cc.jpg

New Nissan KA valve cover gaskets $19 shipped:
http://i197.photobucket.com/albums/aa291/sr20drifter1/015_zps3a4f5080.jpg
Touge Factory high pressure power steering line, $89 shipped.


http://i197.photobucket.com/albums/aa291/sr20drifter1/013_zps21dd91e4.jpg

Tomei shift knob pic. You can see the "T" underneath the engraved numbers. It says "T Tomei".HKS short shifter: SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/063-2.jpg

[sr20drifter1]

Toby Broadfield's custom set up. All the sensors are brand new in their boxes. It took me very long time to find these gauges in white since they're discontinued. I still could not find a white face fuel pressure gauge; that's why, there is a black face gauge.SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/055.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/IMG_4071-vi.jpg

[drprgamsta17]

Bump because i had that cusco strut bar on my s13. Wish it fit my s14..

[Koukicrazy]

Are those Kouki Side Skirts for sale?

[sr20drifter1]

^^^The side skirts are gone. They were some of the first parts to go.
All pms replied. I'll take more pictures of parts tomorrow.

Apexi and HKS BOV. Use the same flange as Greddy type R. HKS is on the left and Apexi on the right.

http://i197.photobucket.com/albums/aa291/sr20drifter1/068-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/069-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/067-1.jpg

http://i197.photobucket.com/albums/aa291/sr20drifter1/066-1.jpg

In very good condition coilpacks for sr20det, SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/011_zps9a5954f4.jpg

ARC front and rear adjustable sway bars. The front bar will come with ARC end links $529 shipped. I'm firm on these.
http://i197.photobucket.com/albums/aa291/sr20drifter1/035-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/034-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/033-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/032-2.jpg
Adjustable ARBs - Stewart Leask (http://www.stewartleask.com/build/adjustable-arbs)

[niscur29]

Hey man I sent you a PM on the cusco front bar.

[d_nice]

wow that Custom Broadfield with defi is nice

[sr20drifter1]

Hey man I sent you a PM on the cusco front bar.
I sent you a pm back.

wow that Custom Broadfield with defi is nice
Thanks.
Pic of the cluster when Toby was still working on it.
http://i197.photobucket.com/albums/aa291/sr20drifter1/IMG_4071-vi.jpg

All pms replied. Keep those offers coming.

Nismo engine and trans mounts pics:SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/009-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/008-1.jpg

Nice clamps and couplers; $9/each. LMK what you want:
http://i197.photobucket.com/albums/aa291/sr20drifter1/075.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/076.jpg

[sr20drifter1]

Like new tires pics:

235-40-17
http://i197.photobucket.com/albums/aa291/sr20drifter1/028-1.jpg
215-40-17
http://i197.photobucket.com/albums/aa291/sr20drifter1/022-1.jpg

S13 radio trims. 3 left hand drive and 1 rhd, $19/each.
http://i197.photobucket.com/albums/aa291/sr20drifter1/016-2.jpg

Toby Broadfield custom glove compartment $59 shipped obo
http://i197.photobucket.com/albums/aa291/sr20drifter1/IMG_5242-vi.jpg

[sr20drifter1]

All pms replied.
Stance subframe bushing. One of the collars on the left missing $39 shipped.
http://i197.photobucket.com/albums/aa291/sr20drifter1/001-5.jpg

[jamg]

i messaged you brah

[sr20drifter1]

Message replied. I'll be posting more exciting parts soon. Get ready.

[Chapabig]

pm me price on motor mounts and on of hte lhd radio bezels uncraked to 33473

[mr.nismo.]

that rear end is beautiful

[soryu]

pm sent for radio trim.

[sr20drifter1]

pm me price on motor mounts and on of hte lhd radio bezels uncraked to 33473
Pm sent.
that rear end is beautiful
Thanks. I have a deal for both the wing and the rear valances.

pm sent for radio trim.
PM replied. I'll send you pics tomorrow morning.

Okay. It looks like I'm going to let a lot of the parts that I was trying to keep go.
For these parts, it will be first come first serve. I've had a lot of people sending me offers, but they never came through after I took their offers. Please do not send me an email after I've sold what you wanted.
Thanks.
Let's get this started:
1- HKS sr20det short shifter witha very rare Tomei GT shift knob SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/063-2.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/037.jpg
2- Very rare S13 yeloow foglights. People who know what these are, also know how hard they are to find, $OLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/017-4.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/016-4.jpg
3- S13 sr20det very rare , real JUN intake manifold. I don't even know where to start with this one. Very beautiful piece of art. Greddy can't even come close to this one, $949 shipped. It will come with IAVC and throttle body.These go for more than $1k all day in Japan. Don't lowball if you can't afford this.
http://i197.photobucket.com/albums/aa291/sr20drifter1/092.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/091.jpg
4- Another rare part. This is a border fuel rail for sr20det. It bolts right on the JUN intake manifold without modifications. Another beautiful piece of art. $349. Please don't waist my time on this one either. I'll gladly keep all these parts if I don't get what I'm looking for.
http://i197.photobucket.com/albums/aa291/sr20drifter1/090.jpg
5- My like new Ikeya Formula suspension kit:
*Tension rods SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/005-5.jpg
*Tie rods with Tie rod ends $479shipped. The tie rod ends alone go for more than SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/004-5.jpg
* Toe rods SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/006-3.jpg
* Old school Koguchi Ikeya FLCA. These give you a little more room to play. $499 shipped
http://i197.photobucket.com/albums/aa291/sr20drifter1/007-3.jpg

[sr20drifter1]

* Ikeya Rear Lower Control Arms SOLD
http://i197.photobucket.com/albums/aa291/sr20drifter1/003-5.jpg

Very rare S13 Tomei Racing hooks, $299 shipped. I haven't seen another set in the original box like this one.
http://i197.photobucket.com/albums/aa291/sr20drifter1/001-7.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/002-5.jpg

Very rare Morcollage wing for S14. The only one I've seen so far, $499 shipped.
http://i197.photobucket.com/albums/aa291/sr20drifter1/002-5.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/005-2.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/004-1.jpg

[jasoniqbal]

Do you still have those motor and trans mounts?

[sr20drifter1]

Do you still have those motor and trans mounts?

Yes I do. I have few offers about them, but no one has sent payment.

[sr20drifter1]

I also have a rare Tomei 3 points strut bar for S13, PENDING firm. I'll post pictures tomorrow. My cousin deleted all recent pictures of my car by mistake when he was trying to install songs on my portable hard drive.
It looks like this (google pic):

http://images.engineeredtoslide.com/wp-content/uploads/2010/11/IMG_0869-560x420.jpg

[sr20drifter1]

All pms replied. Again guys, I just don't want anybody to be mad at me after I sold parts that they sent me offers for. First come first serve. You send the money first, the part is yours. Thanks.

Cisco hot pipe for sr20.
43893

[Z33dori]

free bump for you

[sr20drifter1]

Thanks man. Sold few parts. I'll be updating the list tonight. Thanks.

[GenkiZenki808]

Lovin that fasty wing man. Wish i could afford it right now.

[heiyuu]

Bro you absolutely have the gnarliest collection of parts I've ever seen. The tomei 3 pt bar, the lower control arms, they all make my mouth water. I really wish I could afford your suspension.

Free bump for a fantastic seller!

[sr20drifter1]

^^^Thanks guys.
All pms replied. I'll update the list when I get home tonight.

[sr20drifter1]

All pms replied.
I've also put "SOLD" next to parts that have been sold.

Price reduced on the following parts:

Coilpacks $old

http://i197.photobucket.com/albums/aa291/sr20drifter1/011_zps9a5954f4.jpg

Nardi classic steering wheel $old, but I will include matching perforated leather with red stitches shift boot and e-brake cover ($60 value):

http://i197.photobucket.com/albums/aa291/sr20drifter1/007-4.jpg

For anyone that requested more pics. I'll be able to take them tomorrow. I just did not get a chance to do it today.

[sr20drifter1]

JUN intake manifold inside pic:
http://i197.photobucket.com/albums/aa291/sr20drifter1/060-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/059-1.jpg

[sr20drifter1]

Ikeya set sold. Rear 5 lug pending. Will post more parts soon.

[sr20drifter1]

All pms replied. Still taking offers.

[sr20drifter1]

I have a s13 Tomei 3 point strut bar. I'm taking offers for it. I'll post pics tomorrow morning.

[OiyItsC4ry]

The rear valances still for sale? and those kouki tails for sale?

[sr20drifter1]

Kouki tails are gone. Valances are still available. Almost everything is on sale on eBay.

[sr20drifter1]

Still taking offers guys. I need these parts out of my garage before this winter.

OEM center bezel with oem uncracked shift boot $39 shipped.
http://i197.photobucket.com/albums/aa291/sr20drifter1/049-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/051-2.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/054-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/053-1.jpg

[Suburban Bum]

Do you have a full photo set when the wing was on the car? I'm interested to see what it looks like from a different angle than the rear.

[sr20drifter1]

My cousin deleted all the recent pictures I had of my car by mistake, but here is some old pics what I still have:
http://i197.photobucket.com/albums/aa291/sr20drifter1/IMG_0089-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/IMG_0048-1.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/027.jpg

[OiyItsC4ry]

I want those koukis aha

[epedomic]

still got the tires?
how much shipped to 76210?

[Suburban Bum]

Hmmm it's a good wing, but it's not for me. Thanks for posting those up homie.

[sr20drifter1]

Still have the tires. Most of the parts are on sale on eBay, but I still give priority to people on here if the offer is reasonable.

[jjjjjjjjjjjjjjjjjjjjjjjjj]

How much u asking for the valances or 3point tomei? Can do package deal with the valances and defi pressure gauge? Maybe both 3 point tomei and cusco f&r bars too if the prices are nice

Thanks

[sr20drifter1]

Defi set is sold. 3 point Tomei is pending sale. I'll send you a pm later.
I'll also update the thread 'cause a lot of parts have been sold.

[darkflow]

pmed you about flcas.

[jjjjjjjjjjjjjjjjjjjjjjjjj]

Defi set is sold. 3 point Tomei is pending sale. I'll send you a pm later.
I'll also update the thread 'cause a lot of parts have been sold.

Ok still interested in the valances if the price isn't too crazy after shipping to Hawaii. Let me know when u get a chance thanx

[sr20drifter1]

Sorry, the rear valances are also pending.

[Mikey McFly]

PM'd you about the valances and wing. Disregard the first one I sent. I was somewhat excited about the sale and didn't slow down and read the following posts, haha.

[zacharyseabee]

How much use on B&M?

[sr20drifter1]

^^^Sorry, I don't have a B&M. Wing and valances are sold.
Giving Zilvia a special deal on this race ready Greddy oil cooler with thermostat. It cost more than $1,200 new from RHD Japan without shipping, but they have it on sale now for more than $950 without shipping. The last one I saw for sale here was for a Toyota set up, and it was more than $700. Just check links below to see what I'm talking about.
If you've invested a lot in your engine, and you want to keep it safe, this is for you. Sorry, I was asking a lot less before because I wanted these parts out of my garage, but I can't afford to be losing money all the time. $499 shipped.
http://zilvia.net/f/sale-items/460889-used-trust-greddy-thermostat-oil-cooler-filter-relocation-kit-toyota-jza-jzx-ae.html
TRUST GREDDY Oil Cooler & Filter Relocation Kit - Nissan PS13 RPS13 (http://www.rhdjapan.com/greddy-oil-cooler-and-filter-relocation-kit-s13-ps13-59500)

http://i197.photobucket.com/albums/aa291/sr20drifter1/001-4.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/005-3.jpg

[sr20drifter1]

I'm also giving a deal on the Nismo 2 way Pro GT LSD in a S13 pumpkin. It was used for less than 500 miles. It's in like new condition. It comes with shafts and 5 bolts axels, $799 picked up or $849 shipped.

http://i197.photobucket.com/albums/aa291/sr20drifter1/016.jpg
http://i197.photobucket.com/albums/aa291/sr20drifter1/007-5.jpg

[sr20drifter1]

All pms replied. $300 for the tires picked up.

[sex14]

man soo much quality parts !! almost mythical like parts for us here in the US. wish i had the cash for that r200 diff tho.

[sr20drifter1]

Thanks.For some reasons, I can't access zilvia from a regular computer.