Billet n60/n62 maf housing for blow through

[turbotank]

83.50 shipped in lower 48 for block
108.50 shipped in lower 48 for block welded to tube

These are primarily used for blow through applications using the z32(n62) or maxima(n60) maf internals. These were made so the end user can weld this on wherever they 8-10" of straight 3" aluminum tubing and have a much nicer cleaner piping install.

Instructions as well as all the screws needed in stainless are included.
The caps are a very close fit and there is reliefs cut into the housing for a small screw driver to get them off.

Theses can even be pre-welded to a 7.5" section of 3" bead rolled aluminum tubing to mimic the plastic housing with a filter adapter on if you didnt want to weld to your own piping this can be done for and additional 25$



http://img210.imageshack.us/img210/7772/imag0517z.jpg
http://img687.imageshack.us/img687/714/1001125m.jpg
http://img101.imageshack.us/img101/6361/1011220.jpg

[240sxfan6882]

These look good, im interested

[sideways_s14]

just saw this, looks pretty dope. with it already pre-welded, we would just need to take the guts of our z32 maf, and we're good? what about the wiring, does it need to be extended so it can make it to the cold side piping? sorry, really green about blow-through setups...

[Carl H]

fyi, while the product is super nice and well made (i have one) you will need custom tuning with this.

[turbotank]

I have a few left if anyone needs one let me know

Sent from my EVO using Tapatalk 2

[originsr20]

i can definitely use one. PM your paypal info and a price thanks!