tapdeznutz
09-11-2012, 02:54 PM
Getting right down to business. Everything is obo so offer up. More pictures are on my photobucket, same name. Text me at 562.522.9340 thanks for looking.
single 16" S14 se 5 lug wheel with center cap, bad tire. great for 5 lug spare. $30obo
pair of 16" altima 5 lug wheels with bad tires, $30 for pair.
ka24E Gauge Cluster with dohc speedometer, everything works except the odometer which currently shows 280k or so. $30.
5 Spd Tranny Mount from Ka24E if that matters, $25 or i can DIY urethane fill it for total of $40. Let me know.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_4045.jpg
ka24E driver side motor mount, $25 or i can DIY urethane fill it for total of $40. Let me know.
S13 lighten oem flywheel. will probably need to be resurfaced. i purchased it on zilvia a few months ago but have not needed a clutch job just yet. i will try to get access to a scale and weigh both oem and the lightened one i have. $80
S13 hatch Tail lights...center and right side very clean, left has a small blemish. $10 each, specify which side you need or $25 for whole set.
ka24E Stock Cam. purchased it and was going to sent it out as a core to O&J but just not ready for it right now. $25 obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3959.jpg
S13 stock rear top hats. $20 pair obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3955.jpg
"3D" ECU i forget which S14 goes to but all i remember is came from a obdI car. did some research and found out that is edu is for S14 '95 auto. just in case that helps anyone. $25obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3947.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3948.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3949.jpg
320cc High imped top feed injectors. Drop in for KA24E DIY Turbo. I have test fitted these and they fit just like the stock injectors do. $75 obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3924.jpg
'06 G35 drivers seat w/o headrest. i was modding the rails to install into my s13 hatch but it sits too high on stock rails. May be a great mod for aftermarket seat rails but not stock. So in other words I already drilled out the mounting tabs on the seat rails. Still in great condition, leather is still very soft and side air bad still intact. SOLD, Thanks CraigsList
single 16" S14 se 5 lug wheel with center cap, bad tire. great for 5 lug spare. $30obo
pair of 16" altima 5 lug wheels with bad tires, $30 for pair.
ka24E Gauge Cluster with dohc speedometer, everything works except the odometer which currently shows 280k or so. $30.
5 Spd Tranny Mount from Ka24E if that matters, $25 or i can DIY urethane fill it for total of $40. Let me know.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_4045.jpg
ka24E driver side motor mount, $25 or i can DIY urethane fill it for total of $40. Let me know.
S13 lighten oem flywheel. will probably need to be resurfaced. i purchased it on zilvia a few months ago but have not needed a clutch job just yet. i will try to get access to a scale and weigh both oem and the lightened one i have. $80
S13 hatch Tail lights...center and right side very clean, left has a small blemish. $10 each, specify which side you need or $25 for whole set.
ka24E Stock Cam. purchased it and was going to sent it out as a core to O&J but just not ready for it right now. $25 obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3959.jpg
S13 stock rear top hats. $20 pair obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3955.jpg
"3D" ECU i forget which S14 goes to but all i remember is came from a obdI car. did some research and found out that is edu is for S14 '95 auto. just in case that helps anyone. $25obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3947.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3948.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3949.jpg
320cc High imped top feed injectors. Drop in for KA24E DIY Turbo. I have test fitted these and they fit just like the stock injectors do. $75 obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3924.jpg
'06 G35 drivers seat w/o headrest. i was modding the rails to install into my s13 hatch but it sits too high on stock rails. May be a great mod for aftermarket seat rails but not stock. So in other words I already drilled out the mounting tabs on the seat rails. Still in great condition, leather is still very soft and side air bad still intact. SOLD, Thanks CraigsList