PDA

View Full Version : **FS: R32 (Z32) Rear Brakes Complete w/ebrake and knuckle

silvia14
03-05-2004, 08:57 PM
Complete Rear Brakes swap for 240sx:

R32 GTS-4 Rear 2 pistons calipers (Iron)
11.6" vented rotors and pads (lots left)
complete e-brake hardwares (1 e-brake cable is cut, another one is perfect)
aluminum knuckles (Left and Right)

If you don't know much about R32, they are identical to Z32 TT units.
all bolt onto S13/S14 except the e-brakes cables.
swap info (thanks to www.importnut.net):
http://importnut.net/300zxbrakeswap.htm

$300 shipped

[email protected]
silvia14
03-05-2004, 08:59 PM
I'm pulling the brakes from this complete rear end:
silvia14
03-05-2004, 09:00 PM
Close up of caliper/rotor:
silvia Ks 91
03-05-2004, 10:08 PM
i think, that the rear sturts will bolt on to this right, stock 240. is that right? i know the the z32 rear breaks will not let you. because where the bottom of the strut bolts on, is different then a 240's one.

but if these r32 ones will bolt right up to a stock 240sx shock. i will buy them right now. thanx!
silvia14
03-06-2004, 02:23 AM
i think, that the rear sturts will bolt on to this right, stock 240. is that right? i know the the z32 rear breaks will not let you. because where the bottom of the strut bolts on, is different then a 240's one.

but if these r32 ones will bolt right up to a stock 240sx shock. i will buy them right now. thanx!


No the R32 shock mounting design is same as Z32

so your stock shock will not bolt onto these R32 knuckles

BUT

you can bolt these R32 brakes + e-brakes to your S13/S14 knuckle. Just don't use these R32 knuckles. That'll work prefectly. for more info see http://importnut.net/300zxbrakeswap.htm

Then you can sell these aluminum knuckles =)

Jeff
silvia Ks 91
03-06-2004, 04:21 AM
thank you!
silvia14
03-06-2004, 04:27 AM
thank you!

no problem....so buy it now man....lol
clean
03-06-2004, 11:31 AM
how bout just the ebrake/splash sheild backing plate setup. im 4 lug and would need 4 lug rotors and i already can get the rear calipers rebuilt. someone would still buy the other stuff from you for sure. email me @ [email protected] if you wanna do that.
jy116
08-16-2004, 11:59 PM
hey, still available?

I got most of the parts for swap, but the car I found was missing the right[?] rear knuckle assembly. It might be the left, Im picking it up tomorrow. But I will need all the stuff for one side in the rear...

I have s14 5 lug stuff, steelies w/ tires, other stuff, if you want to trade...

Thanks, [email protected]