View Full Version : Big guy friendly bucket seat thread! biggy biggy
rb25_s13*CHUKI
09-06-2012, 06:22 PM
I'm gonna make this thread for us bigger people to chime in and share your bucket seat set ups, Rail set up. Anything that involves you being 6 feet plus and not super slim around the waist! weather it be fatty fat fat or buff muscles!
What seat setup do you have in your S chassis or any car for that matter!?
Do you like to sit high in the sky? or low to the floor?
You like barley fitting in the car with your helmet?
I don't care of your seat is bolted through your damn chassis lets hear about it!
Do you like sitting nice and low and snug for great car control and comfort?
Let's see this happen! Big people unite!
BiG MiKE86
09-06-2012, 07:01 PM
I had a buddy club with nagaisa? rails and im 6'1" and was 320lbs with a solid 42 waist and was comfortable and sat real low
S13 Hatch btw
rb25_s13*CHUKI
09-06-2012, 08:00 PM
I had a buddy club with nagaisa? rails and im 6'1" and was 320lbs with a solid 42 waist and was comfortable and sat real low
S13 Hatch btw
Any pics? I'm gonna post my pics once i finish my set up! I'm about the same as you! 6'2 300 lbs and dropping. trying to get back down to my oem weight haha, 246
Perfect Balance
09-06-2012, 10:40 PM
How the hell did you fit into a Buddy Club seat? They're like Bride Seat sized. I'm 215lb and I can't comfortably fit into one.
In any case. Nagisa Auto rails, Recaro Pole Position (barely squeezes into the rails) fits me completely comfortably. 6ft, 215lb. 36in waist.
unreal-
09-06-2012, 10:42 PM
i also have a Buddy Club wide/Nagisa Rail Combo. Im 6'5 270 with a 38 waist. The bottom half of me fits juuuuust right in the bottom half of the seat. Its a bit snug. Top half is another story. Maybe its my build, but its very tight on the ribcage, and my shoulders rest on TOP of the wings on the side of the seat. Im slouched foward, and cant put my back flat against the seat.
Basically i wouldnt recommend the seat if you are a tall guy with a wide torso.
Nagisa rails: they are nice rails, but the buddy club wide is a bit TOO wide for the rails. It took me a solid 2-3hrs to get the seat and rails to fit in my car (S14) and line up. The specs for the rails call for a MAXIMUM seat width of 400mm. The buddy clubs are 415mm. They will fit if you loosen the bolts that mount to the seat and the bolts that mount to the chassis and kind of push the rails inwards while tightening the chassis bolts. Pain in the ass. And to make things more complicated the seat is angled a bit to the right, and its off center a bit, and i have reached maximum adjustabillity for the side mounts (the mounts themselves hit the trans tunnel side and wont adjust anymore). To make things easier i would use another rail, or custom mounts. It also interferes with the gas/trunk handle. I played with my rails enough so that i kind of wore a chunk out of the handle, so it moves freely.
Besides that, the seat is pretty comfy if your body type allows it lol.
That said, Im going to be getting a sparco EVO3 and custom mounting it in a few months. Need a bigger seat that actually FITS me and leaves a bit of room.
TheRealSy90
09-06-2012, 11:00 PM
Not tall at 5'9" 250lbs but i'm not slim lol. I have a Corbeau FX1 with Nagisa Auto rails with the bucket touching the floor. In a coupe with a power sunroof.
LOL EVERYBODY HAS NAGISA RAILS.
rb25_s13*CHUKI
09-07-2012, 09:23 PM
The nagisa rails say they don't fit wide seats? Is this true? I'm getting a corbeau forza wide seat and still can't decide on which damn rails haha
unreal-
09-07-2012, 09:29 PM
The nagisa rails say they don't fit wide seats? Is this true? I'm getting a corbeau forza wide seat and still can't decide on which damn rails haha
Not really. Max width for a seat is 400mm on their site. Anything more will require some "finesse" to squeeze the seat onto the rails, or modification of the rails themselves.
!Zar!
09-08-2012, 12:27 PM
Bride and Nagisa rails don't go that wide. Buddyclub rails go the widest. Only problem with with going really wide is the seat sits higher since it needs to be wider than the rails.
Buddy Club, Sparco, Recaro, and Corbeau make wide seats I think.
If I had to use a wide seat, I would probably just make my own rails so the seat would sit lower.
rb25_s13*CHUKI
09-08-2012, 03:03 PM
Bride and Nagisa rails don't go that wide. Buddyclub rails go the widest. Only problem with with going really wide is the seat sits higher since it needs to be wider than the rails.
Buddy Club, Sparco, Recaro, and Corbeau make wide seats I think.
If I had to use a wide seat, I would probably just make my own rails so the seat would sit lower.
Well my weight is dropping pretty fast so I'll probably pick up the standard corbeau forza seat or the fx1 so hopefully I'll be able to use the nagisa rails!
I've always just rocked s14 seats or s15 seats, I only had bucket seats once and that was in my Fc they were sparco, some small as sparcos with wedge brackets and i actually sat nicely but then again I was 240 lbs with 38-36 inch waist
Jesse SR20
09-09-2012, 02:49 PM
6'2 300 lbs and dropping. trying to get back down to my oem weight haha, 246
Bowflex makes a seat you should check out.
J/K. I'm 6'1", 185, 34" waist. I'm running a Buddy Club wide on Bride rails. I modified the fuck out of the rails, and squeezed that seat in there. Works great, and I have plenty of hip wiggle room in the bottom end of the seat.
xc0re
09-10-2012, 07:47 AM
38"-40" waist and I sit comfortably in a Recaro SPG. Nagisa rails. I'd like it if the rails were a bit lower. Oh well.
Lutz Performance
09-10-2012, 08:06 AM
Recaro Pole Position
6 ft even
245lbs
This is hands down the best seat i've ever used ever. Comfy to daily, and i fit like a glove in it.
San Diego Kouki
09-10-2012, 08:31 AM
I'm buying a bride stradia reclinable soon, 5'11 220 or so lbs 34 inch waist. Anybody in one of those with a similar build?
landins13
09-10-2012, 08:43 AM
I have a NRG large bucket with buddy club rail. Im 6'1" 225lb 36" waist. Seat is comfortable but the rail makes it too high for my liking. My head almost hits the sunroof with helmet on.
fullthrottle
09-10-2012, 08:45 AM
Bowflex makes a seat you should check out.
J/K. I'm 6'1", 185, 34" waist. I'm running a Buddy Club wide on Bride rails. I modified the fuck out of the rails, and squeezed that seat in there. Works great, and I have plenty of hip wiggle room in the bottom end of the seat.
this thread is for fat people you skinny douchebag haha
Sent from my SGH-T769 using Tapatalk 2
http://cdn.overclock.net/c/c4/c4bc96bd_index.jpeg
I'm buying a bride stradia reclinable soon, 5'11 220 or so lbs 34 inch waist. Anybody in one of those with a similar build?
This thread is for Big boys..... get your pansy 5'11, 34 inch waist out of here. You can fit into every fucking seat available. :smash:
driftsucky
09-10-2012, 09:33 AM
I haven't seen a big dude measurement yet. Get yourself a nice 48" waist and then we can talk. My wife has spent the last 6 years ensuring that my wiast stays too large to be attractive to the opposite sex. And I haven't had a seat SINCE I've been married. Back in the day (like early 2000's), I had a Sparco seat in my Z. I'll try to find a picture of it cuz I'm sure it's scattered around my hard drive at home. It came with the car though. I was probably a 36-38 back then and it wasn't uncomfortable. The Z was my daily before kids and sh1t. It sat a bit high with my helmet. Not Top Gun Goose dies high, but if I turned my head and looked out of my window, the top of my helmet felt like it was rubbing on the headliner. Made drifting on a track a bit awkward. lol
rb25_s13*CHUKI
09-10-2012, 10:01 AM
Bowflex makes a seat you should check out.
J/K. I'm 6'1", 185, 34" waist. I'm running a Buddy Club wide on Bride rails. I modified the fuck out of the rails, and squeezed that seat in there. Works great, and I have plenty of hip wiggle room in the bottom end of the seat.
Fuck a bowflex! panzy shit right there! Free weights is the way to go!
rb25_s13*CHUKI
09-10-2012, 10:01 AM
http://cdn.overclock.net/c/c4/c4bc96bd_index.jpeg
This thread is for Big boys..... get your pansy 5'11, 34 inch waist out of here. You can fit into every fucking seat available. :smash:
Word need pics indeed
Sleepiedaze
09-10-2012, 11:05 AM
6'4 300pds i run a utlra shield aluminum seat. just add padding. call them give them your mesurements and BAM! custom fitted seat.
http://www.ultrashieldrace.com/prodthumb.php?maxheight=200&maxwidth=130&id=19
San Diego Kouki
09-10-2012, 12:53 PM
http://cdn.overclock.net/c/c4/c4bc96bd_index.jpeg
This thread is for Big boys..... get your pansy 5'11, 34 inch waist out of here. You can fit into every fucking seat available. :smash:
I weigh 220 and i bought a sparco speed but my shoulders are too broad!! Been trying to sell it back for months. Fat isnt the only kind of big. Dont hate me just because i dont sweat butter! but really though i don't wanna buy a seat that will make me a hunch back.
driftsucky
09-10-2012, 01:51 PM
Dont hate me just because i dont sweat butter!.
I'm offended and amused.
rb25_s13*CHUKI
09-10-2012, 02:04 PM
I weigh 220 and i bought a sparco speed but my shoulders are too broad!! Been trying to sell it back for months. Fat isnt the only kind of big. Dont hate me just because i dont sweat butter! but really though i don't wanna buy a seat that will make me a hunch back.
Yup, that's why i said big guy bucket seat thread! Not fat people bucket seat thread haha
rb25_s13*CHUKI
09-10-2012, 02:08 PM
this thread is for fat people you skinny douchebag haha
Sent from my SGH-T769 using Tapatalk 2
Big people in general not fat people only,
Califunky
09-10-2012, 02:10 PM
I used to run a pair of sparco evo xl's on customised bride rails. I'm 5'9" with (at the time) a 40" waist. Will try and find some pics but it was over 5yrs ago now.
Did about 1200 miles in a week on a holiday including a trackday @ http://www.oultonpark.co.uk/ - seats were brilliant. Really went a long way to hide the shitty roads over here
rb25_s13*CHUKI
09-10-2012, 02:11 PM
38"-40" waist and I sit comfortably in a Recaro SPG. Nagisa rails. I'd like it if the rails were a bit lower. Oh well.
How tall are you?
!Zar!
09-10-2012, 03:00 PM
Waist isn't the only issue. Taller people need a seat that has the shoulders in the proper area.
picsbypenny
09-10-2012, 03:13 PM
http://i46.tinypic.com/1e9yjm.jpg
Some circle track racer was getting rid of his stuff and gave me his seat.
Made custom rails for it, sat pretty low.
6 foot, fat(305lb)
Perfect Balance
09-10-2012, 08:17 PM
I think some people in this thread don't understand how a proper fitting racing seat should feel. 42 inch waist, 320lb in a Buddy Club seat? 40 inch waist and you fit comfortably into an SPG? gtfo, there's no way you fit correctly into that seat. Is your body extremely long but only 14 inches wide or something? My friend weighs about 140lb and an SPG fit's him properly, as in snug but not tight, all the bolsters in the right place, harness holes in the proper locations, ect. I can fit into it but it's not at all properly sized for me. This is why I bought a Memory Fab S68 when they were offering them after everyone claimed that it fits 38 inch waists. I had a 36 so I bought one figuring I'd fit perfectly, only to find I couldn't fit comfortably if I had as much as a thick hoodie on.
I agree, we need pics. I can't imagine how some of you guys are fitting into these seats.
rb25_s13*CHUKI
09-10-2012, 09:23 PM
Waist isn't the only issue. Taller people need a seat that has the shoulders in the proper area.
Thank you!
i bought a sparco speed but my shoulders are too broad! i don't wanna buy a seat that will make me a hunch back.
what are your shoulders ?
http://www.atailoredsuit.com/images/pictures/dress_shirt_shoulder_measurement.jpg
and if your shoulders aren't fitting... then are your 5'11 all torso ?
Also the seat padding is different from seat to seat, did you even bother putting your non-butter-sweating-butt in one before you bought it ? I used to have that same seat and my shoulders weren't the problem. But then again I took out the padding so I could sit in it. The pics I see from the knock off sparco speeds have a lot of padding in the wrong places, are you sure you didn't buy one of those ?
Also you might want to look into a sparco fighter instead.
Sparco Fighter
http://www.fortyone.co.nz/part_images/sparco-fighterlarge_redblk.jpg
Sparco Speed
http://www.diseno-art.com/images_3/Sparco_Speed.jpg
jerry_beans
09-11-2012, 12:41 AM
I wanna see how a recoro spg xl sits in an s14 with nagisa rails! Someone has to have that setup!
rb25_s13*CHUKI
09-11-2012, 01:01 AM
That's the seat i use to have in my fc like 4 years ago! With wedge brackets! The sparco speed i was about 245 then and i squeezed in there nice and snug. After a while the seat got comfy after it adjusted after a couple weeks
The12thDoctor
09-12-2012, 05:26 PM
Thanks for this thread. I'm 5"11 250 and my stock s14 seats are okay, but I'm sliding a bit because the sides aren't planting me back properly if that makes sense? Trying to find a semi-inexpensive option (since I dropped most of what I have on the S14 itself nearly three days ago.) Is it completely idiotic to look into some of the "ebay specials" or should I just save the coin & go Sparco or Corbeau down the line?
208s14.5
09-25-2012, 08:22 PM
Anyone had any problems with a gias 2, im about 5' 11" 250lbs and pretty hesitant about gettting one just in case my ass doesnt fit. Anyone got any problems with 'em?
mestizo
09-25-2012, 08:30 PM
In case you don't find you're answer in this thread, try this one... http://zilvia.net/f/chat/369700-too-tall-240-a.html
InsTanCeZ
09-25-2012, 09:03 PM
I'm 6'2" 225 lbs. 36" waist. Anyone know if I will fit in a Bride Zeta III Type L?
jerry_beans
09-26-2012, 02:00 PM
You should, I'm 6'1 230 pounds size 38 and I fit into a zeta 3 the l is 5 mm ricer then the 3!
murffy
09-26-2012, 05:24 PM
Im 6'1 220 pounds and im effin comfortable in my thrasher sparco evo xl, dont mind the ghetto tape its really torn but it gets the job done, i took the sliders out and have the seat fixed to the bracket because its my car and im the only one that drives it. and i have dumb wedge brackets which are so high i get nose bleeds some times but with the sliders out of the equation im sitting alittle lower than stock seat height here are my pics....
http://i279.photobucket.com/albums/kk151/carlos9277/B370500B-5C52-4333-9FFC-F25AB4C0725F-6942-00000CB5CC40A41C.jpg
http://i279.photobucket.com/albums/kk151/carlos9277/2E017A23-2C48-4D62-BCB6-C511F6D1E6BA-6942-00000CB5D48A3C91.jpg
i<3chicken
09-26-2012, 05:49 PM
Hey guys I'm looking for a seat....not sure its possible cuz I barely even fit in any car. I'm 6'6", 280lbs, and 42"waist
Sent from my SGH-T769 using Tapatalk 2
Renelovesnike
09-26-2012, 06:13 PM
Im running a RECARO SPG-N on buddy club rails, its easily more comfy than my zeta 2 and is verry BIG BOOTY friendly!!
its actually wider and taller at the shoulders and at top for taller people!
and it sits verry low thanks to the budy club rails. i just had to mess with the L and 7 brackets to get everything to line right up. ill post pics after a quick vacuum.
i know its not sold in the states tho! so idk if its a pain to find,i got it in a trade and comes with a VERRY GLITTERY back so thats a +
http://i47.tinypic.com/20gobw7.jpg
http://i50.tinypic.com/dzuioy.jpg
http://i46.tinypic.com/jzcupc.jpg
San Diego Kouki
10-22-2012, 09:48 AM
what are your shoulders ?
http://www.atailoredsuit.com/images/pictures/dress_shirt_shoulder_measurement.jpg
and if your shoulders aren't fitting... then are your 5'11 all torso ?
Also the seat padding is different from seat to seat, did you even bother putting your non-butter-sweating-butt in one before you bought it ? I used to have that same seat and my shoulders weren't the problem. But then again I took out the padding so I could sit in it. The pics I see from the knock off sparco speeds have a lot of padding in the wrong places, are you sure you didn't buy one of those ?
Also you might want to look into a sparco fighter instead.
Sparco Fighter
http://www.fortyone.co.nz/part_images/sparco-fighterlarge_redblk.jpg
Sparco Speed
http://www.diseno-art.com/images_3/Sparco_Speed.jpg
Thanks for the feedback, my shoulders are 22inches wide. I bought my seat at streets of longbeach from sparco directly. My shoulders are definitely wider than the seat. To be honest i bought it out of impulse I liked the fighter but I couldn't afford it at the time. I never mounted the speed im still trying to sell it.
BoostinIX
10-23-2012, 03:53 AM
Long as somebody already bumped this, might as well use it. Any thoughts on OMP WRC XL? Seems a rather fluffy friendly seat, just haven't personally seen it in a 14 yet.
greenwood
10-23-2012, 01:18 PM
I suggest stop being so fat and lose some weight. You will have more energy and a generally happier life all around.
Unless your bones are that wide, then you probably shouldnt even own a s13.
driftsucky
10-23-2012, 01:35 PM
I suggest stop being so fat and lose some weight. You will have more energy and a generally happier life all around.
False!!! When I was in the Army (for a decade) I was in shape and not as happy...I mean... I was at war for some of that too soooooo:hsdance:
Tearlessj
10-23-2012, 01:47 PM
Not my fault I got too much junk in the trunk! If I had to pick one seat for us bigger guys I would get a Sparco Evo2. Much better than a Recaro Pole Position.
greenwood
10-23-2012, 02:12 PM
being in war, does have a detriment to mental health. skinny up now and you will be happier.
lame_s13
10-23-2012, 02:29 PM
When I was broke and a fatty I bought a nex racing seat and it fit my 5'10 255 butter sweating 42" waist perfectly. Currently about a 38" and its still working well. Its mounted on buddy club rails but towide to fit the slider bar so its currently fixed and does sit a little high.
San Diego Kouki
10-24-2012, 08:30 PM
I suggest stop being so fat and lose some weight. You will have more energy and a generally happier life all around.
Unless your bones are that wide, then you probably shouldnt even own a s13.
Is someone bitter because they gave up their lunch money to bigger people?
Eazy_tom
10-24-2012, 09:03 PM
34 waist 5'10" 215lbs with broad shoulders.
Any brides that will fit, what about omp?
HIGHFIVEBETA
10-24-2012, 10:03 PM
Motorsport is not for fat people...
Lol
jk jk
I rock a 32 waist, am 5'9, and have an average-to-wide size back. Anything bride was VERY tight. I would imagine any western manufacturer (Summit Racing, Kirkey, etc) would be a good bet for big people
silviaguy240
10-25-2012, 09:11 AM
34 waist 5'10" 215lbs with broad shoulders.
Any brides that will fit, what about omp?
Zeta III will be a bit snug but can work. But a buddy of mine has a Buddy club wide and he likes it. He was like 5'9 230 and it fit him good.
rb25_s13*CHUKI
11-17-2012, 06:03 AM
I suggest stop being so fat and lose some weight. You will have more energy and a generally happier life all around.
Unless your bones are that wide, then you probably shouldnt even own a s13.
I don't remember asking what people think about other people, I asked what are bigger people's seat set ups. You are a very ignorant person
What race are you?
matthewAPM
11-17-2012, 11:36 AM
Try the Sonic Motor G3 seat. It is wide.
boost
11-17-2012, 09:35 PM
I sat in a zeta3 XL last week. they're big. it's loose on a 34 (biggest dude there at the time, 200lbs maybe 5'10 or so). i'd say it's for 36+. I think it would be comfy on a 36 and might start to feel tight around 38. I wouldn't recommend it for 34 unless you're not racing and just want to be comfy with easy in/out. it fits the dudes that I know that are 6'+ 250+lbs
SomeoneWhoIsntMe
11-18-2012, 12:57 PM
I'm 6'6", like 180lbs on a good day, and a size 32 or 33 waist. Pretty much fucked forever on seat selection. Right now I rock a jimmyup fake bride, and width wise it's awesome but I'm a full head taller than the seat haha.
Corbic
11-18-2012, 05:09 PM
seat - JEGS High Performance (http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&Nty=1&Ntx=mode+matchboolean&Ntk=PartType_x&N=0&Ntt=^seat^)
The 15 year olds won't swarm your car but it'll get the job done and be cheap.
LayNLow
11-18-2012, 07:41 PM
34 waist 5'10" 215lbs with broad shoulders.
Any brides that will fit, what about omp?
OMP shouldnt be a problem, they have wides that look like they will fit bigger guys. Your a 34, shouldnt be a problem.
Long as somebody already bumped this, might as well use it. Any thoughts on OMP WRC XL? Seems a rather fluffy friendly seat, just haven't personally seen it in a 14 yet.
I was actually thinking about getting an OMP HTE XL myself. Ive gotta save up some money for it, so I wont know for another month or so. So many things to buy so little money(coming to me anyways)
TougeSC3
11-18-2012, 08:11 PM
I had a RaceTech RT4009W in my SC. Fits great and I'm a big dude. 6'3" 300lbs.
Sent from my EVO using Tapatalk 2
zodpowercy
10-24-2014, 07:49 AM
No one here is actually big ? I am around 5'11 and more or less around 400 pounds and seats became actually a problem when i had the terrible idea to "upgrade" my worn s14a seats with some almost new s15 ones.Short drives are perfectly fine but long trips became very uncorfotable....I have the same problem on my s15......From the one hand s15 seats look very nice if they are in good condition but they simply are not as comfortable as s14 ones ...I looked for an altenative but except some super expensive Recaro expert L or Orthoped seats everything else is basically too small ...
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.