PDA

View Full Version : TX feeler ls1 s13 coupe FT gs300


davinci
09-06-2012, 03:37 PM
Ok guys this is kind of a feeler. I have been working on this car for year and half now and to be honset im starting to grow out of it. Its an awesome beast of a car. Fast as hell.... but im starting to get older (30) and im just looking to swap out for something nicer more vip style.

The only thing im looking to trade for is a 98+ lexus gs300/400 black exterior preff with black interior.

Looking for local but i do have shipping connections if your out of state and wanna trade. If i do put the car up for sale it will prob go up for 8k+ Thats just the cost of car and parts installed. not time and labor.

CLEAR TITLE IN HAND. your car must be the same, and if you have a salvage title gs300 you may have to throw in money or it has to be fixed up with wheels and coils. salvage gs300 go for 4-5k here all day. i just want something that looks nice and is dependable. This is not my only car, but i want something better than my integra daily to cruise in

Car
1989 red nissan 240sx coupe

engine
2002 trans am pull out
5.7 litre ls1
ls6 intake
comp cams custom grind 238/244 114 @.050 .605-.612 !!!
patriot extreme double valve springs
katech rod bolts
melling high pressure oil pump
double roller timing chain
bbk 80mm tb
larger maf off vette
fueled racing oil pan
relocated oil filter
fueled racing long tube headers
3" to off road Y magnaflow to 3.5 back to magnaflow hushpower muffler
vette fpr, walboro 255 fuel pump. braided stainless lines up to engine bay
car shop inc. motor mounts (no modifying was done to xmemeber)
comes with efi live v1 already licensed to this ecu, already installed and hidden behind dash. just grab usb cord and plug it in
mishimoto radiator with slim dul fal fans
160 degree thermostat
custom ac lines

t56 transmission
pro 5.0 shifter
spec stage 3 clutch
new flywheel when clutch was intalled 6 months ago
new to bearing, and main seal

driveshaft masters driveshaft
j30 lsd

exterior
car is stock. paint looks great in the pictures. up close it still looks really godo but does have some rough spots. top of the car is oxidizing. passenger front fender has some paint chipped out. (originally planned to paint it all black)

suspension
4lug. ( i have 5 lug j30 front hubs (press in bearing) and 300z rear hubs but they have not been installed yet. i could include these depending on purchse)

andys auto wilwood 4pot caliper adapters and wilwood 4 pot calipers with stainless brake lines. (these are not installed either but can be included in the trade depending on car ($500 total spent on these parts) they use 350z track rotors that you can purchse from 88rotors.com

spc caster front rods, rear toe rods. cheap ass tokiko blue shocks and lower springs (car dips little lower on drivers side)

interior

Dash is cracked. interior is very clean. original high traffic dark greyish black carpet. comes with f1 race seat with buddy club low slider. gauge cluster is assortment gauges by autometer, rpm, fuel pressure, fuel level, and pillor pod that has engine temp and oil pressure. all working. (they are mixed and matched b/c its what i had from previous projects and wanted to do a marshall gauge swap)

RUST... no rust has been found on the car except!! the spare tire well. rust has take over the well. its not eating through. its just brown. couple times i have sanded it down and painted rust reformer.

no interior in the trunk.
Frame rails UNDER THE CAR. some parts are bent up looks like from jacking the vehicle up in the wrong spot on the box. pictures will be included

front cabin has had two layers of heat shield barrier put down under the carpet to stop heat from the long tube headers.

THE AC DOES WORK!! i have the ac hooked up. this blows cold as can be. during traffic and very very hot days at stand still it will not blow super cold but still cold enough. this is due to the ls1 being variable displacement compressor and fact taht i have no small pusher fan on front of the condesnsor to help out.


This car is fun, it idles like a beast, gets attention from everyone everywhere i go. and i slaughter almost anything on the freeway b/c my car only ways 2500 lbs... and thats with no traction. Im just getting to a stage where i wanna stop spending money on performance stuff, and just have a nice car to cruise in while i spend money on business ventures.

some quick pics. if anyone is really interested i will take full blown high deff pics with teh dslr. remember paint in pics looks awesome. up close it does need some work but it still looks really good when you wax it and give it good buff

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/539427_217712318358319_1124367900_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-prn1/s720x720/525847_144104669052418_1854060125_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/562976_155067394622812_132852474_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-snc7/574456_152974624832089_2076105705_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/418424_120804214715797_1532986526_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-prn1/525824_163463493783202_102308311_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/542096_163463513783200_140835887_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/544984_163463527116532_980093170_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-snc7/575037_172405812888970_1064084988_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/529519_202322246563993_263367396_n.jpg

s14k
09-06-2012, 07:34 PM
Nice car free bump

dyls240
09-06-2012, 07:38 PM
omgg i want. would u take an s14 hahah
nice car man glws

s13vette
09-06-2012, 09:23 PM
Nice listen sorry i know is off topic but i too have an ls1 s13... how did you make your cluster..? if you have any tips


Thanks man and car looks good.

Mofuhcka
09-06-2012, 10:30 PM
Sleeeeeeeeper

davinci
09-07-2012, 11:07 AM
Nice listen sorry i know is off topic but i too have an ls1 s13... how did you make your cluster..? if you have any tips


Thanks man and car looks good.

piece of thin sheet metal from home depot cut out into the shape of the cluster you see. with small tabs bent up on top and bottom to secure it to the dash underneath. couple hole saws, some textured paint and your good to go.

all the guage power is in the harness from the original cluster.
all my guages use sending units so everything came from the sending unit or from the ls1 ecu itself as far as signals to guages.

1fastser
09-07-2012, 11:19 AM
Pics no worky?

davinci
09-10-2012, 10:14 PM
anyone else? really looking for black gs300

more pics and video to be uploaded today. and dyno numbers

JohnnyWas
09-11-2012, 01:46 AM
Do you have a sale price? Did I miss that part?

davinci
09-13-2012, 12:17 PM
best offer i have is for 8600 out of state. also working on maybe trading for a gs430 from calif.

car dyno'd at 375 to the wheels on mild street tune and stock heads. runs fine all way up to redlind (7000rpm) power was still climbing and i could taken it to 8k to make more but i didnt have my laptop with me to reset rev limiter.

20120911_162235.mp4 - YouTube (http://www.youtube.com/watch?v=aZI8Z7oFHtw)

drifts14guy
09-13-2012, 01:32 PM
I can vouch for this guy! I saw this car at car meet Wednesday night sounds good and mean! Free bump let's get this going!