cobraa
09-06-2012, 08:52 AM
Okay guys, pictures will follow when I get all my stuff together.
1) OEM Transmission for BNR32 with transfer case, no shifter and fork, just the tranny and t-case*. It was said that the transmission was working but had a grind on the 4th when used on the drag. I didn't test it so I can't tell you. 250$
2) Brand new Nismo pivot ball ; SOLD
3) Brand new Nissan OEM Synchro kit (1-5) ; 300$
http://img521.imageshack.us/img521/1769/dsc2839y.jpg
4) Not oem DO-LUCK rear bumper for GTS ( not sure it would fit a GTR) : 350$
http://img19.imageshack.us/img19/9328/dsc0197dt.jpg
http://img256.imageshack.us/img256/923/dsc0198eq.jpg
http://img72.imageshack.us/img72/327/dsc0200gp.jpg
5) R34 reverse light with harness; 60$
http://img69.imageshack.us/img69/2728/dsc0195zd.jpg
6) AMS Brembo v-spec 324mm front rotor 2 piece, used about 5000km, in very good shape ; SOLD
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/195851_1781234606654_1113091637_1996861_1963436_n. jpg
7) Many car care products as you can see below:
FS: Quality detailing supply + wax sample. (http://forums.gtrcanada.com/off-topic-marketplace/54686-fs-quality-detailing-supply-wax-sample.html)
8) Front GTR Sway bar ; 40$
http://img94.imageshack.us/img94/5783/dsc8532j.jpg
http://img233.imageshack.us/img233/9531/dsc8533b.jpg
9) CDT subwoofer 12 inch, take 600wrms. these thing are real SQ sub, very high-end stuff, I used to do sound competition. do not get some junk infinity sub for 100$ get the real thing!
200$ each, I have 3 of these ( retail is about 400$ each!)
http://www.lightav.com/car/cdt/ES-SQ1000.jpg
10) Mocal oil cooler 19 fin, brand new but one thread is screwed, so you need a machine shop to replace the an-10 thread. 70$ retail for 180$
http://img267.imageshack.us/img267/1263/dsc2838e.jpg
11) No name oil cooler 19 fin, brand new, an-10 SOLD
http://img405.imageshack.us/img405/3557/dsc2834i.jpg
12) 2 aeroquip an-10 hose with 90 degrees fitting, fit a relocation kit down to the front bumper for an oil cooler setup. 100$ Retail : SOLD
http://img267.imageshack.us/img267/1263/dsc2838e.jpg
13) Greddy thermostat oil plate for nissan brand new. SOLD
http://img528.imageshack.us/img528/1435/dsc2835y.jpg
14) Turbosmart DUAL PORT with mazda flange ( can be recir or atmo or both! very neat!) used maybe for a month or so.. SOLD
http://img513.imageshack.us/img513/7852/dsc2831o.jpg
http://img62.imageshack.us/img62/2313/dsc2832c.jpg
15) Not working Blitz DD bov .. 20$
16) Tein tension rod for BNR32 150$
http://img13.imageshack.us/img13/9537/dsc2826wq.jpg
17) Greddy boost sensor brand new: 70$
http://img819.imageshack.us/img819/4716/dsc2827r.jpg
18) gtr oem bov 20$
http://img18.imageshack.us/img18/4804/dsc2828y.jpg
19) top rad hose 20$
http://img521.imageshack.us/img521/7056/dsc2829z.jpg
20) aeroquip -10 around 18 inch hose. SOLD
http://img820.imageshack.us/img820/1445/dsc2830l.jpg
21) mishimoto rad cap 19lbs. 20$
http://img411.imageshack.us/img411/746/dsc2836m.jpg
22) machining screw so you can delete the breather on top of rb26 to make it fit an-10 instead: 40$ for both
http://img528.imageshack.us/img528/1435/dsc2835y.jpg
23) Sard 700cc low independance fuel injector
Used for about 4000 kms. 6x low independance, drop-in in the rb26 fuel rail ( not sure for the other)
Asking 550$ shipped.
http://img33.imageshack.us/img33/226/dsc3532v.jpg
24) AEM Water- methanol injection kit with failsafe gauge
Kit has been mounted and 1 gallong of solution was used so basicly the kit has 50km of use:
What is included:
AEM Failsafe device with aem software for full tuning ability: retail 265$us
AEM Water Methanol FAILSAFE Device 1/4" SAE (http://www.aemelectronics.com/water-methanol-failsafe-device-1-4-sae-1184)
AEM Filter, but it has been over-tighted so unless you want to fix it with some sealant, jb weld, its no use: retail: 28$
AEM Water /Methanol Injection Filter Part# 30-3003 (http://www.aemelectronics.com/water-methanol-injection-filter-1161)
AEM Nozzle with built-in check-valve, comes with 3 nozzles. retail : 58$
AEM Water/Methanol Injector Nozzle Kit 30-3012 (http://www.aemelectronics.com/water-methanol-injector-nozzle-kit-788)
1 gallon AEM with Low-fluid sensor: retail 66$
Water/Methanol Injection 1 Gallon Tank 30-3011 (http://www.aemelectronics.com/water-methanol-injection-1-gallon-tank-695)
AEM progressive controller ( some wires might be cut and may need to be longer) : retail 150$
AEM Water/Methanol Injection System, Water/Methanol Injection for Turbos (http://www.aemelectronics.com/1-gallon-water-methanol-injection-kit-691)
AEM pump new -style: retail 130$
AEM Water/Methanol Injection Pump - Recirculation-Style (http://www.aemelectronics.com/recirculation-style-water-methanol-injection-pump-698)
Total retail value: with pump : 697$ US. ( you can easily figure it will at least cost an extra 15% for shipping and tax/duties) so total cost of this kit is about 800$ish
The only thing missing in this kit will be the 10$ tubing!
I'm asking 650$
25) Greddy informeter multi gauge display
I'm selling a greddy informeter touch with the non-obd sensor. These 2 items retail for about 550$ + tax + shipping so your good for 650ish once everything get to your door. I think my price is fair enough for something in very good shape.
I want 400$ for it.
I also have the non-obd sensor adapter in order to connect additional sensor to it. which retail for 175$ its brand new.
I have the greddy boost sensor which retail for 125$
Make me an offer on these 2 others items if you want them with the gauge.
P.S:I also have the oil pressure and oil temp sensor + harness which is another 200$ + the wideant sensor and harness which is another 100$. However, I think I will keep these 3 sensors.
26) Torque split controller for skyline GTR AWD or gts-4
Just like this one, used for 1 summer. unit will come with cut wires.
http://imgc.classistatic.com/cps/blnc/120801/303r1/377464d_20.jpeg
Asking 200$
27) HKS Actuator ( was on a set of GT-SS) this is a pair. used for 5 000 kms. Asking 250$
28) I will also have a OS GIKEN TS2B for RB motor but I will wait till I see the condition of th eplate before putting a price.
29) Denso Supra 280 lph fuel pump. Used for 3000ish km. retail : 280$
Asking 150$
1) OEM Transmission for BNR32 with transfer case, no shifter and fork, just the tranny and t-case*. It was said that the transmission was working but had a grind on the 4th when used on the drag. I didn't test it so I can't tell you. 250$
2) Brand new Nismo pivot ball ; SOLD
3) Brand new Nissan OEM Synchro kit (1-5) ; 300$
http://img521.imageshack.us/img521/1769/dsc2839y.jpg
4) Not oem DO-LUCK rear bumper for GTS ( not sure it would fit a GTR) : 350$
http://img19.imageshack.us/img19/9328/dsc0197dt.jpg
http://img256.imageshack.us/img256/923/dsc0198eq.jpg
http://img72.imageshack.us/img72/327/dsc0200gp.jpg
5) R34 reverse light with harness; 60$
http://img69.imageshack.us/img69/2728/dsc0195zd.jpg
6) AMS Brembo v-spec 324mm front rotor 2 piece, used about 5000km, in very good shape ; SOLD
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/195851_1781234606654_1113091637_1996861_1963436_n. jpg
7) Many car care products as you can see below:
FS: Quality detailing supply + wax sample. (http://forums.gtrcanada.com/off-topic-marketplace/54686-fs-quality-detailing-supply-wax-sample.html)
8) Front GTR Sway bar ; 40$
http://img94.imageshack.us/img94/5783/dsc8532j.jpg
http://img233.imageshack.us/img233/9531/dsc8533b.jpg
9) CDT subwoofer 12 inch, take 600wrms. these thing are real SQ sub, very high-end stuff, I used to do sound competition. do not get some junk infinity sub for 100$ get the real thing!
200$ each, I have 3 of these ( retail is about 400$ each!)
http://www.lightav.com/car/cdt/ES-SQ1000.jpg
10) Mocal oil cooler 19 fin, brand new but one thread is screwed, so you need a machine shop to replace the an-10 thread. 70$ retail for 180$
http://img267.imageshack.us/img267/1263/dsc2838e.jpg
11) No name oil cooler 19 fin, brand new, an-10 SOLD
http://img405.imageshack.us/img405/3557/dsc2834i.jpg
12) 2 aeroquip an-10 hose with 90 degrees fitting, fit a relocation kit down to the front bumper for an oil cooler setup. 100$ Retail : SOLD
http://img267.imageshack.us/img267/1263/dsc2838e.jpg
13) Greddy thermostat oil plate for nissan brand new. SOLD
http://img528.imageshack.us/img528/1435/dsc2835y.jpg
14) Turbosmart DUAL PORT with mazda flange ( can be recir or atmo or both! very neat!) used maybe for a month or so.. SOLD
http://img513.imageshack.us/img513/7852/dsc2831o.jpg
http://img62.imageshack.us/img62/2313/dsc2832c.jpg
15) Not working Blitz DD bov .. 20$
16) Tein tension rod for BNR32 150$
http://img13.imageshack.us/img13/9537/dsc2826wq.jpg
17) Greddy boost sensor brand new: 70$
http://img819.imageshack.us/img819/4716/dsc2827r.jpg
18) gtr oem bov 20$
http://img18.imageshack.us/img18/4804/dsc2828y.jpg
19) top rad hose 20$
http://img521.imageshack.us/img521/7056/dsc2829z.jpg
20) aeroquip -10 around 18 inch hose. SOLD
http://img820.imageshack.us/img820/1445/dsc2830l.jpg
21) mishimoto rad cap 19lbs. 20$
http://img411.imageshack.us/img411/746/dsc2836m.jpg
22) machining screw so you can delete the breather on top of rb26 to make it fit an-10 instead: 40$ for both
http://img528.imageshack.us/img528/1435/dsc2835y.jpg
23) Sard 700cc low independance fuel injector
Used for about 4000 kms. 6x low independance, drop-in in the rb26 fuel rail ( not sure for the other)
Asking 550$ shipped.
http://img33.imageshack.us/img33/226/dsc3532v.jpg
24) AEM Water- methanol injection kit with failsafe gauge
Kit has been mounted and 1 gallong of solution was used so basicly the kit has 50km of use:
What is included:
AEM Failsafe device with aem software for full tuning ability: retail 265$us
AEM Water Methanol FAILSAFE Device 1/4" SAE (http://www.aemelectronics.com/water-methanol-failsafe-device-1-4-sae-1184)
AEM Filter, but it has been over-tighted so unless you want to fix it with some sealant, jb weld, its no use: retail: 28$
AEM Water /Methanol Injection Filter Part# 30-3003 (http://www.aemelectronics.com/water-methanol-injection-filter-1161)
AEM Nozzle with built-in check-valve, comes with 3 nozzles. retail : 58$
AEM Water/Methanol Injector Nozzle Kit 30-3012 (http://www.aemelectronics.com/water-methanol-injector-nozzle-kit-788)
1 gallon AEM with Low-fluid sensor: retail 66$
Water/Methanol Injection 1 Gallon Tank 30-3011 (http://www.aemelectronics.com/water-methanol-injection-1-gallon-tank-695)
AEM progressive controller ( some wires might be cut and may need to be longer) : retail 150$
AEM Water/Methanol Injection System, Water/Methanol Injection for Turbos (http://www.aemelectronics.com/1-gallon-water-methanol-injection-kit-691)
AEM pump new -style: retail 130$
AEM Water/Methanol Injection Pump - Recirculation-Style (http://www.aemelectronics.com/recirculation-style-water-methanol-injection-pump-698)
Total retail value: with pump : 697$ US. ( you can easily figure it will at least cost an extra 15% for shipping and tax/duties) so total cost of this kit is about 800$ish
The only thing missing in this kit will be the 10$ tubing!
I'm asking 650$
25) Greddy informeter multi gauge display
I'm selling a greddy informeter touch with the non-obd sensor. These 2 items retail for about 550$ + tax + shipping so your good for 650ish once everything get to your door. I think my price is fair enough for something in very good shape.
I want 400$ for it.
I also have the non-obd sensor adapter in order to connect additional sensor to it. which retail for 175$ its brand new.
I have the greddy boost sensor which retail for 125$
Make me an offer on these 2 others items if you want them with the gauge.
P.S:I also have the oil pressure and oil temp sensor + harness which is another 200$ + the wideant sensor and harness which is another 100$. However, I think I will keep these 3 sensors.
26) Torque split controller for skyline GTR AWD or gts-4
Just like this one, used for 1 summer. unit will come with cut wires.
http://imgc.classistatic.com/cps/blnc/120801/303r1/377464d_20.jpeg
Asking 200$
27) HKS Actuator ( was on a set of GT-SS) this is a pair. used for 5 000 kms. Asking 250$
28) I will also have a OS GIKEN TS2B for RB motor but I will wait till I see the condition of th eplate before putting a price.
29) Denso Supra 280 lph fuel pump. Used for 3000ish km. retail : 280$
Asking 150$