Nachtmensch
08-19-2012, 11:37 PM
Obviously I have a whole lot of time and money into this car. I have owned it for 4.5 years, since the chassis had 51k on it. The chassis now has 105k. The 2ZZ motor has just over 14k on it now and the car is my daily driver and has been garaged the past 3 winters avoiding any salt. The body panels need some love because the car has seen lots of track time. I warm the coolant and oil up before revving high (9000 RPM redline). The car runs on 93 octane and made 207 whp at ILL Garage. Not bad for a 1.8L in a 2250lb car :)
Honestly, this is the most fun I have had in a car (over any other car I've driven) and it will be sad to see it go. Driving it pins a smile on me and has given me no problems.
Location: DeKalb, IL
Price: $18,000 as is, pricing can change by not including TE's, suspension, or engine/trans. I have well over that into this car.
Email: [email protected]
Engine/fuel/management
Low mile 2zzge block (60k)
Monkey Wrench Racing coated bearings
ARP rod bolts
New OEM Toyota main bolts
Circuitworx oil pump gear in brand new Toyota housing
Moroso baffled high capacity oil pan
OEM Toyota head gasket
ARP 2000 head studs
Monkey Wrench Racing Stage 3 cams
Monkey Wrench Racing flat face valves
Supertech valve springs
Supertech titanium retainers
New OEM valve seals
New OEM valve cover gasket
New OEM timing cover gaskets (2)
New Water pump (metal impeller)
New OEM water pump gasket
New OEM rear main seal
New OEM front main seal
Hondata Intake manifold gasket
Injector Dynamics ID1000 injectors
Apex'i PowerFC w/ commander
FC-Hako
Intake/Exhaust
2.75" Intake w/ Vibrant coupler
PPE 4-1 header
Custom rear grill exhaust - Stainless, V-band, Magnaflow muffler, polished exit pipes
Transmission
C60 6speed
KAAZ 1.5way LSD
Exedy stage 2 clutch
Fidanza aluminum flywheel
Suspension/Chassis
HKS Hipermax II Coilovers
Megan rear toe arms
Corky MSMB - "Mid-Ship Member Brace" (large center chassis brace, ties in nearly the complete middle of the car)
Corky FMB - "Front Member Brace" (ties steering rack/cross member to middle of the car)
Reinforced rear subframe
Hard Dog roll bar
Exterior
Fiberglass TRD Style aero
03-05 side vents
Stubby antenna
6000k HID kit
Interior
OMP Grip seat
OMP Corsa steering wheel
NRG steering wheel hub
Bride FG seat rail
Cusco D1 shift knob
Alpine head unit - iPod/iPhone playback
Stack ST3501 oil pressure gauge
Stack ST3509 oil temperature gauge
Stack ST3402 wideband gauge
Powder Coating
Rear subframe
Valve cover
Header (Jet Hot)
Wheels/Tires
(4) Volk TE37 16x8 +42 w/ Dunlop DZ101 205/45-16
(1) Volk TE37 16x7 +33 w/ Pirelli 205/45-16
(2) Rota Slipstream 16x7 +45 w/ Dunlop DZ101 205/45-16
(2) Rota Slipstream 16x7 +45 w/ no ties
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/2012/SummerLovin.jpg
http://farm8.staticflickr.com/7251/7640953938_c630f0eaf8_b.jpg
http://farm9.staticflickr.com/8022/7640956526_2228fd42e8_b.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Track/DSC_0070.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Track/DSC_0095.jpg
http://www.jdmchat.com/dc2lsvtec///Pics/MR-S/2012/543242_10150923342349691_166248089690_9595866_8848 79223_n.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Engine/2zz%20swap/installed.jpg
http://www.jdmchicago.com/wekfest/14.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Interior/2011%20Interior.jpg
Honestly, this is the most fun I have had in a car (over any other car I've driven) and it will be sad to see it go. Driving it pins a smile on me and has given me no problems.
Location: DeKalb, IL
Price: $18,000 as is, pricing can change by not including TE's, suspension, or engine/trans. I have well over that into this car.
Email: [email protected]
Engine/fuel/management
Low mile 2zzge block (60k)
Monkey Wrench Racing coated bearings
ARP rod bolts
New OEM Toyota main bolts
Circuitworx oil pump gear in brand new Toyota housing
Moroso baffled high capacity oil pan
OEM Toyota head gasket
ARP 2000 head studs
Monkey Wrench Racing Stage 3 cams
Monkey Wrench Racing flat face valves
Supertech valve springs
Supertech titanium retainers
New OEM valve seals
New OEM valve cover gasket
New OEM timing cover gaskets (2)
New Water pump (metal impeller)
New OEM water pump gasket
New OEM rear main seal
New OEM front main seal
Hondata Intake manifold gasket
Injector Dynamics ID1000 injectors
Apex'i PowerFC w/ commander
FC-Hako
Intake/Exhaust
2.75" Intake w/ Vibrant coupler
PPE 4-1 header
Custom rear grill exhaust - Stainless, V-band, Magnaflow muffler, polished exit pipes
Transmission
C60 6speed
KAAZ 1.5way LSD
Exedy stage 2 clutch
Fidanza aluminum flywheel
Suspension/Chassis
HKS Hipermax II Coilovers
Megan rear toe arms
Corky MSMB - "Mid-Ship Member Brace" (large center chassis brace, ties in nearly the complete middle of the car)
Corky FMB - "Front Member Brace" (ties steering rack/cross member to middle of the car)
Reinforced rear subframe
Hard Dog roll bar
Exterior
Fiberglass TRD Style aero
03-05 side vents
Stubby antenna
6000k HID kit
Interior
OMP Grip seat
OMP Corsa steering wheel
NRG steering wheel hub
Bride FG seat rail
Cusco D1 shift knob
Alpine head unit - iPod/iPhone playback
Stack ST3501 oil pressure gauge
Stack ST3509 oil temperature gauge
Stack ST3402 wideband gauge
Powder Coating
Rear subframe
Valve cover
Header (Jet Hot)
Wheels/Tires
(4) Volk TE37 16x8 +42 w/ Dunlop DZ101 205/45-16
(1) Volk TE37 16x7 +33 w/ Pirelli 205/45-16
(2) Rota Slipstream 16x7 +45 w/ Dunlop DZ101 205/45-16
(2) Rota Slipstream 16x7 +45 w/ no ties
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/2012/SummerLovin.jpg
http://farm8.staticflickr.com/7251/7640953938_c630f0eaf8_b.jpg
http://farm9.staticflickr.com/8022/7640956526_2228fd42e8_b.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Track/DSC_0070.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Track/DSC_0095.jpg
http://www.jdmchat.com/dc2lsvtec///Pics/MR-S/2012/543242_10150923342349691_166248089690_9595866_8848 79223_n.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Engine/2zz%20swap/installed.jpg
http://www.jdmchicago.com/wekfest/14.jpg
http://www.jdmchat.com/dc2lsvtec//Pics/MR-S/Interior/2011%20Interior.jpg