WTB: Redtop SR ECU

[bkuhl]

#62 ECU; 100% working order. PM me please.

[brndck]

http://zilvia.net/f/sale-items/466702-mines-boost-up-62-ecu-redtop-sr20det.html

[bkuhl]

Thanks Ty, I need a stock one so I can get it tuned/chipped by JWT or RS-E.

current one is no longer sending signal to the fuel pump.

GT2871 .64 a/r
810cc DW inj.
Walbro 255 lph pump
JWT 272 in/ex cams

[brndck]

Thanks Ty, I need a stock one so I can get it tuned/chipped by JWT or RS-E.

current one is no longer sending signal to the fuel pump.

GT2871 .64 a/r
810cc DW inj.
Walbro 255 lph pump
JWT 272 in/ex cams

One Thing you should check first, I've seen multiple #62 ecus with this same problem where the ecu no longer triggers the fuel pump relay (ECCS relay). The ecu provides the ground for the relay to close. What I have done in the past, with great success, is to clip the wire and run the side that goes to the relay (not the side from the ecu) to a manual switch that will ground the relay when switched on. This also works great as a kill switch for security.

My last #62 ecu had this problem and that's what I can up with. You can find an ecu pinout on goggle images, the terminal should be labelled "fuel pump relay" or "ECCS relay".

[silviaNC]

I have an e6 on hand. Let me kniw if it is any good to you