PDA

View Full Version : PA 1" z32 Brake master cylinder, megan tension rods, rear traction rods

Cypher02xd
08-17-2012, 02:05 PM
I have a few parts left over from my s13 when it was totalled. The Megan parts have ~2000 miles on them. The car mostly sat after I got it on the road while I did more work to it. And the Z32 brake master has considerably less. Maybe 1000. I was considering holding onto them in case I picked up another s13 but I am currently shopping STI's so I won't be getting another s13.

http://i55.photobucket.com/albums/g141/cypher02xd/2012-08-17_144527.jpg
http://i55.photobucket.com/albums/g141/cypher02xd/2012-08-17_144502.jpg
http://i55.photobucket.com/albums/g141/cypher02xd/2012-08-17_144627.jpg

Not sure what to ask for these anymore so I'll just ask for $125 for all the megan parts and $75 for the z32 brake master cylinder. the Brake master was bought new!!! Not a used unit from a junkyard car.

I am located near Reading, PA and would perfer to deliver or meet somewhere versus mailing them but I will do what I have to for an interested buyer. Please just pm me or post here and I will be keeping track.
JBotch79
08-17-2012, 02:14 PM
Is that a 1 1/16th bmc or just straight 1"?
ohshtnoboost
08-17-2012, 02:27 PM
Does the Master cylinder have the 3rd fitting installed?
d_nice
08-17-2012, 08:15 PM
^^^same question
Cypher02xd
08-19-2012, 05:01 PM
Is that a 1 1/16th bmc or just straight 1"?

1". My mistake, I thought I had mentioned it in the posting.

Does the Master cylinder have the 3rd fitting installed?

I am confused by your question. The master cylinder has three ports coming out. One for the Lf, one for the R/f and one for the rear. That's how I used it. It did come with a plug orginally for an abs car but I removed it seeing as how I did not have abs. So it has 3 ports on it.
hitt1
08-19-2012, 10:22 PM
You have been Pmed...
Grimmiee
08-20-2012, 01:01 AM
$100 for the megan's?
ohshtnoboost
08-20-2012, 08:13 AM
To be able to use the master w/o the line leaking you need to press a flare fitting into the 2nd hole. So my question to you was does it have this 3rd fitting installed?
Cypher02xd
09-02-2012, 12:27 PM
$100 for the megan's?

Sure. pm me if you're still interested

To be able to use the master w/o the line leaking you need to press a flare fitting into the 2nd hole. So my question to you was does it have this 3rd fitting installed?

Yes. I've never seen one without that fitting installed lol being as I used all 3 ports on the master and never had any leaks it seemed like a strange question. The only difference I have seen is that some simply have a plug in place of the middle port on the master.
Cypher02xd
09-23-2012, 09:03 AM
Still have these laying around. Please help me clean them up.