PDA

View Full Version : NY FS: 18x8 Rota (XD9 reps)


driftsucky
08-15-2012, 11:05 AM
Backstory: When I bought my car, the front passenger side wheel (oem) was bent. I was looking for a factory replacement wheel and then these came about locally. I had planned to install them so I could drive the car without a vibration. However, I've parked the car and when I DO drive it (1nce or 2wice a month at most), I don't really care about the vibration. I've gotten the wheel to a point where it doesn't loose air and I no longer have a need for these wheels. So, these were never used (by me).
Condition: 8/10 They are a skotch dirty from sitting in my garage, but nothing a bit of soap and water can't fix. There's a slight bit of curb rash on one of the wheels, but I'd have to point it out to you. I tried to capture it in the pix. Everytime I got close, it got blury soooo...
Specs: These are 18x8 all the way around. The offset looks to be about +35, but I have never measured it. Their fitment is really more for a FWD vehicle, but they will mount just fine to any 5x114.3 bolt pattern (as I checked) and with spacers, anything is possible. I never went that far because they were nothing more than a functional replacement for a daily commute for me.
Price: $415 local pickup or $415+shipping. OBO XO OVO:D I'm not really in a hurry to sell these as it's not needed but I also have no use for them. All reasonable offers will be considered.
pictorz;
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-51-12_669.jpg
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-49-38_664.jpg
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-46-23_146.jpg
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-46-14_660.jpg
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-42-49_194.jpg
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-41-52_601.jpg
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-41-29_326.jpg
http://i1185.photobucket.com/albums/z343/driftsucky/2012-08-14_20-41-08_622.jpg

[email protected] is the easiest way to get a hold of me if you're intersted. Peace up. A-town down.

driftsucky
08-16-2012, 11:08 AM
http://forum-img.pinside.com/pinball/forum/?bb_attachments=337403&bbat=36775&inline

driftage240
08-16-2012, 11:23 AM
These are a copy Prodrive GC-010 not xd9 please dont confuse the wheels

driftsucky
08-18-2012, 08:18 AM
tomato tomato...which I guess doesn't translate as well over type...

fashnootin
08-18-2012, 09:19 AM
According to Rota's website (Tarmac 3 - ROTA Wheels (http://www.rotawheels.com/wheel.php?id=44)) and a quick google search (Auto Car Performance Parts | Auto Accessories | Aftermarket Auto Parts (http://www.racinglab.com/rota-tarmac-3-0004.html)), it looks like the label tells all about these wheels: 18x8 and 5x114.3 as you said, but hub bore is 56.1 (HB 56.1) and offset is +48 (the e48).

I'd totally grab these for my Scion but it has a center bore of 60.1, and Nissans have a 66.1 center bore, so these would be too small unless I found some funky spacer/adapters or ran the wheels lug-centric.

From what I can find online, it seems like Subarus and Hondas have the 56.1 center bore, so you might have luck selling on one of those forums, since they'd have the advantage of not needing hubcentric rings (though I believe only STi's have 5x114.3).

Anyways, free informational bump. Best of luck selling!

driftsucky
08-22-2012, 07:51 PM
Thank you sir. And thanks for the info. I can update stuff now. Looks like Ima end up keepin'em as drift spares. No one seems too interested. lol