brizanden
08-01-2012, 10:39 PM
s13 parts
driverside door lock mechanism $20
front door speaker plastic brackets $10
auto seatbelt computer $5
door dinger unit (for when door is open it makes a noise) $5
Dual cam HUD cluster sub harness $20
hatch rear wiper buttons $5
Rare Discontinued Trust Greddy Pe2 stainless steel catback. It was only sold in japan and is basically a stainless version of a Ti-C. Also same thing as the new Greddy exhuast that just came out but with a angled exit tip. 80mm pipping to 120mm tip sounds beautiful deep and quiet unless WOT. some small scrapes on canister nothing bad or dented and only used for 3-4 thousand miles $400
s14 parts
front loaded calipers with stock pads about 60-70% life left and mounting brackets (good upgrade for s13 front) $50
zenki headlights missing some tabs $40 for both
rear spindle $10
clean red zenki humper no lights $50
Ka parts
s14 head without cam caps $50
s14 IACV with one broke sensor $20
s13 TPS $20
water pump $30
s13 ignition coil $20
motor mounts with some little reinforcments welded on $40
2x s13 p/s pumps $40 each
p/s pump bracket $15
alternator bracket $5
s13 intake mani w/ all sensors $60
oil pan $30
clutch fan $15
s13 clutch fan shroud $15
sr20det redtop parts
sr alternator $50
complete intake manifold with all sensors incl new oem IACV $150
another intake manifold with no throttle body, but with iacv $50
fuel rail with 3 370cc injectors and fpr (one has a chipped plug but still works)- $50
water pump $30
water pump pulley $10
front cover (needs new oil pickup) $30
crank pulley $15
cas x2 $75 each
coil packs + harness $100
stock pistons and rods (one rod has a spun bearing) $40
thermostat housing $20
water jacket $15
dust plate $30
alternator + bracket $70
speed sensor $50
almost new (40 miles if even) ACT lightweight flywheel $200
oversized almost new (40miles if even) isis oil pan $100
http://i56.photobucket.com/albums/g197/brizanden/cas_etc.jpg
http://i56.photobucket.com/albums/g197/brizanden/flywheel_etc.jpg
http://i56.photobucket.com/albums/g197/brizanden/flywheel.jpg
http://i56.photobucket.com/albums/g197/brizanden/alt_others.jpg
http://i56.photobucket.com/albums/g197/brizanden/new_intake.jpg
http://i56.photobucket.com/albums/g197/brizanden/bumper-1.jpg
http://i56.photobucket.com/albums/g197/brizanden/whole.jpg
http://i56.photobucket.com/albums/g197/brizanden/scraps.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment1.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment2.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment7.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment8.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment3.jpg
http://i56.photobucket.com/albums/g197/brizanden/IMG00102-20111030-1301.jpg
more pics soon
driverside door lock mechanism $20
front door speaker plastic brackets $10
auto seatbelt computer $5
door dinger unit (for when door is open it makes a noise) $5
Dual cam HUD cluster sub harness $20
hatch rear wiper buttons $5
Rare Discontinued Trust Greddy Pe2 stainless steel catback. It was only sold in japan and is basically a stainless version of a Ti-C. Also same thing as the new Greddy exhuast that just came out but with a angled exit tip. 80mm pipping to 120mm tip sounds beautiful deep and quiet unless WOT. some small scrapes on canister nothing bad or dented and only used for 3-4 thousand miles $400
s14 parts
front loaded calipers with stock pads about 60-70% life left and mounting brackets (good upgrade for s13 front) $50
zenki headlights missing some tabs $40 for both
rear spindle $10
clean red zenki humper no lights $50
Ka parts
s14 head without cam caps $50
s14 IACV with one broke sensor $20
s13 TPS $20
water pump $30
s13 ignition coil $20
motor mounts with some little reinforcments welded on $40
2x s13 p/s pumps $40 each
p/s pump bracket $15
alternator bracket $5
s13 intake mani w/ all sensors $60
oil pan $30
clutch fan $15
s13 clutch fan shroud $15
sr20det redtop parts
sr alternator $50
complete intake manifold with all sensors incl new oem IACV $150
another intake manifold with no throttle body, but with iacv $50
fuel rail with 3 370cc injectors and fpr (one has a chipped plug but still works)- $50
water pump $30
water pump pulley $10
front cover (needs new oil pickup) $30
crank pulley $15
cas x2 $75 each
coil packs + harness $100
stock pistons and rods (one rod has a spun bearing) $40
thermostat housing $20
water jacket $15
dust plate $30
alternator + bracket $70
speed sensor $50
almost new (40 miles if even) ACT lightweight flywheel $200
oversized almost new (40miles if even) isis oil pan $100
http://i56.photobucket.com/albums/g197/brizanden/cas_etc.jpg
http://i56.photobucket.com/albums/g197/brizanden/flywheel_etc.jpg
http://i56.photobucket.com/albums/g197/brizanden/flywheel.jpg
http://i56.photobucket.com/albums/g197/brizanden/alt_others.jpg
http://i56.photobucket.com/albums/g197/brizanden/new_intake.jpg
http://i56.photobucket.com/albums/g197/brizanden/bumper-1.jpg
http://i56.photobucket.com/albums/g197/brizanden/whole.jpg
http://i56.photobucket.com/albums/g197/brizanden/scraps.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment1.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment2.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment7.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment8.jpg
http://i56.photobucket.com/albums/g197/brizanden/get-attachment3.jpg
http://i56.photobucket.com/albums/g197/brizanden/IMG00102-20111030-1301.jpg
more pics soon