PDA

View Full Version : Injectors


CrazyS13
02-24-2004, 02:42 PM
whats up guys, i searched so dont get mad at me. I have never heard of this problem before. I got skyline 440cc injectors, they are low impedence with resistors, on a SOHC KA. Ever since i put them in, corrected with an SAFC, when i was NA and when i was boosted, they have always caused a wierd "skip" when i floor it. I know it has to do with the injectors because when i put the stock ones back in, it didnt do it anymore. Anyways, if i give it sharp throttle, such as if i floor it fast, or in a fast gear change when accelerating hard, it skips, like it loses power for a split second, from being very rich (doubt it) or because of "tip in retard". Anyways, i have tried everything to remedy this but nothing seems to work. Has anyone else had this problem before? Also, when i apply the throttle smoothly, even if it is relativly fast, it doesnt do it, only when i hit the throttle hard. Anyone who has done low impedence injectors on a high impedence ECU and had this problem, let me know! Thanks in advance for all replies, and thanks for reading.

-John

mistaanime
02-24-2004, 07:13 PM
wut bout injector cleaner? that stuff you put in the fuel..

CrazyS13
02-24-2004, 08:27 PM
Yeah, i would figure something like that if it ran like ass in general, but it runs great all the time, part throttle cruise and idle, full throttle acceleration, but there is still that skip when i floor it, i dunno, its a wierd issue. thanks for the reply though. Anyone else have an idea :doh: