View Full Version : PA S14 car/s14 notchtop FULL PART OUT
ShadowDrifter
07-17-2012, 11:41 AM
Like the title says I have a 96 s14 with a kouki s14 notch top motor im parting out. if you need anything at all let me know please PM me or contact me at 570-241-2027 for pics or more info. So if you are in need of anything from an s14 or s14 sr
Things I have on car and off
Stock sr20det (cody ace) manifold ported and polished with s14 BB turbo with 38mm EWGA on it and megan O2 housing
SPL front tension rods
nismo power brace
PS yes I know it said not to post asking for pics but I only have a crappy phone that I use and no house comp so I am sorry for this.
FULL exhaust megan racing
full interear GREAT shape no cracks or anything
tein inner and outter tie rods
S14 Sr parts
Pullies
FMIC with piping
FULL motor
ECT ECT ECT
So please let me know what ya may need and we can go from there
ShadowDrifter
07-17-2012, 02:15 PM
Greddy oil pan, 1peice steel drive shaft, FLCA with new moog ball joints and energy suspension bushings, ect ect. let me know what ya may need or want.
bobs13
07-17-2012, 02:24 PM
is this a full motor? is the car a shell?
bussitcustoms
07-17-2012, 02:59 PM
coilovers?
ShadowDrifter
07-17-2012, 03:11 PM
full motor and full car and no no coilovers jsut lowering springs and shocks and all PMs responded to
Captain Falcon
07-17-2012, 05:22 PM
PM sent! I forgot to ask for photos of the motor and the entire car if possible.
ShadowDrifter
07-17-2012, 10:46 PM
Drive shaft sold- shift boot sold- driver window switch sold-passanger fender sold-corner lights sold-
ShadowDrifter
07-17-2012, 10:47 PM
still lots to go just make offers on stuff
slider2828
07-17-2012, 10:49 PM
How much for jut the manifold?
ShadowDrifter
07-17-2012, 11:05 PM
225 shipped its ported and polished and ceramic coated too
slider2828
07-17-2012, 11:28 PM
Damn that is nice..... you got pm....
ShadowDrifter
07-18-2012, 02:57 AM
Turbo sold manifold and o2 housing still up for grabs
kevinzhou
07-18-2012, 10:46 AM
do you have a downpipe?
slider2828
07-18-2012, 10:54 AM
Yeah sorry going to pass on the manifold
sicknamehere
07-18-2012, 11:24 AM
bottom mount turbo elbow/downpipe/testpipe? price shipped to 33771 if possible. 727-288-1210 or pm
s14lover408
07-18-2012, 02:03 PM
5 speed swap?
ShadowDrifter
07-18-2012, 11:49 PM
Drive shaft sold front knuckles sold clutch pedal sold and power brace and inner and outer tie rods sold
ShadowDrifter
07-18-2012, 11:49 PM
I do have an o2 housing downpipe and test pipe PM me if you need anything please or text me for a faster responce
kumokun
07-19-2012, 10:21 AM
how much for the driver and pass FLCA shipped to 58501? lmk. Pm or call/text me 808-291-0678
Price for motor and tranny picked up? Text me 5163201795
Nissan2nr22
07-19-2012, 11:17 AM
I hate whoever bought that driver side window switch already
reptarbad
07-19-2012, 12:23 PM
What kind of fmic?
HunsakerS14
07-19-2012, 12:40 PM
you good sir, have a pm coming.
somedude
07-19-2012, 12:40 PM
is gauge cluster se or base model?
ILoveJDM
07-19-2012, 12:43 PM
s14 sr water neck
pm me how much
xninjaxkirbyx
07-19-2012, 01:13 PM
i need the hazard light switch and the connector for it from the harness. how much shipped 91748?
ShadowDrifter
07-19-2012, 09:17 PM
cluster is Base model and the switch and becasue I would have to cut the harness please PM me or contact me at 570-241-2027
ShadowDrifter
07-19-2012, 09:18 PM
Also FLCA's SOLD front knuckles sold and clutch pedal SOLD and power brace and tie rods sold
ShadowDrifter
07-19-2012, 09:20 PM
Still up for grabs the full motor and trans setup with ECU and harness and lots of extras including greddy oil pan oil filter relocate light weight pulleys, FMIC, rad and eletric fan basically a FULL set up PICKED UP and you have to pull it (I will help) 2500 This week ONLY
Also 99% of a MINT interear still up for grabs
ShadowDrifter
07-19-2012, 09:28 PM
To all the people who bought things I have sent you all messages with your tracking numbers and thank you very much I hope you are Happy with the things you bought. Please let me know if anything else is needed. Also to the people whos stuff you just bought today and yesterday you parts should all go out tomorrow I will send you the tracking numbers. And thank you again
ShadowDrifter
07-20-2012, 03:40 AM
SPL front tension rods still for grabs along with a NEW FULL OEM 5speed setup front and rear hubs right from nissan
ControverZial17
07-20-2012, 09:08 AM
Do you have the stock open diff? if so ill take it immediately!!! please pm me
ShadowDrifter
07-20-2012, 09:37 AM
i do have just the diff call me at 570-241-2027
ShadowDrifter
07-20-2012, 09:42 PM
Spl tension rods 150.shipped 400 miles on them
5lug full swap all farly new (1200) miles on them. They are all OEM and were brand new what I put them on 2 months ago. 500.00 OBO shipped.
Still have custom radio trim and ac vent piece. heater controls are where ash try was and 3 gauage piece where the controls are normally ver clean look. comes with the heater controls for 150.00 shipped
still have full inteaier best offer any parts
Importtuning06
07-21-2012, 09:37 AM
What color are the door panels?
ShadowDrifter
07-21-2012, 07:33 PM
black with gray insert
goomba238
07-23-2012, 09:48 PM
Buy with confidence. Honest seller. Got my corner lights fast. Thanks again.
dat240guy
07-23-2012, 10:50 PM
do you have picture of the door panels and carpet how much for both shipped to 70056.
1jz s14 zenki
07-23-2012, 11:20 PM
Selling the shell if so how much and pics?
ShadowDrifter
07-24-2012, 12:47 AM
PM me about the shell
Martian760
07-24-2012, 01:53 AM
Do u still have the misnomer power brace? How much
Posted from Zilvia.net App for Android
Martian760
07-24-2012, 01:54 AM
Do u still have the NISMO power brace? How much
Posted from Zilvia.net App for Android
Posted from Zilvia.net App for Android
ShadowDrifter
07-24-2012, 02:03 AM
No power brace sold sorry
getsumm s14
07-24-2012, 02:55 AM
Hey bro i need the zenki s14 trunk latch set up and key with that set up shippedto ca 92570 if u have it
ShadowDrifter
07-24-2012, 09:48 AM
sorry trunk latch is not in to good of shape key doesn't work in it. anything else
jivetoast
07-24-2012, 08:06 PM
Does the engine run? whats all left? interested
ShadowDrifter
07-24-2012, 08:22 PM
yes engine runs well not now since there is no turbo but yet it runs and pulls hard if you want it call or text me at 570-241-2027 and I will give you all the info
enkei2k
07-24-2012, 08:41 PM
http://zilvia.net/f/sale-items/408214-no-email-ask-pics-means-you.html
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.