drumnbasslvr
07-12-2012, 09:20 PM
Up for sale is my sr20det HKS turbo kit. This entire setup has @1000 miles on it.
HKS/Garrett GT2835 Turbo; Equivalent to a GT3071R in a T25/T28 configuration. The GT2835/3071R turbos use better flowing T04E housings vs. the T04B ones used on the GT28RS/GT2871R. I purchased a brand new CHRA for it.
Hks manifold, t2 flange, set up for this turbo, modified for a 38mm wastegate. Welds look great on runners but this will need some welding repair on the wastegate runner. The manifold is a TOP MOUNT turbo set up.
Turbo dump pipe for this setup so you can still use the stock sr20det downpipe with it. Nice bronzing on it from use.
Turbosmart 38mm wastegate 14psi spring, is in perfect working order. Wastegate dump pipe pointed at ground included.
One piece intercooler pipe to make the hot side complete in one shot.
DIF turbo lines, missing one water return line otherwise complete.
Turbo blanket, (needed to protect that carbon fiber hood)
I want to stick to my guns to sell this as a whole unless need be. I will be including all the hardware, tbolt couplers, couplers, all that stuff that adds up with this auction. Your needs to complete this setup will be a Mafs, air filter, oil return seal, 4 bolt exhaust gasket, one water return line, oxygen sensor or plug. I will update as needed to give all the info requested.
$2100 shipped, $2000 picked up.
http://i48.tinypic.com/2hs3g44.jpg
HKS/Garrett GT2835 Turbo; Equivalent to a GT3071R in a T25/T28 configuration. The GT2835/3071R turbos use better flowing T04E housings vs. the T04B ones used on the GT28RS/GT2871R. I purchased a brand new CHRA for it.
Hks manifold, t2 flange, set up for this turbo, modified for a 38mm wastegate. Welds look great on runners but this will need some welding repair on the wastegate runner. The manifold is a TOP MOUNT turbo set up.
Turbo dump pipe for this setup so you can still use the stock sr20det downpipe with it. Nice bronzing on it from use.
Turbosmart 38mm wastegate 14psi spring, is in perfect working order. Wastegate dump pipe pointed at ground included.
One piece intercooler pipe to make the hot side complete in one shot.
DIF turbo lines, missing one water return line otherwise complete.
Turbo blanket, (needed to protect that carbon fiber hood)
I want to stick to my guns to sell this as a whole unless need be. I will be including all the hardware, tbolt couplers, couplers, all that stuff that adds up with this auction. Your needs to complete this setup will be a Mafs, air filter, oil return seal, 4 bolt exhaust gasket, one water return line, oxygen sensor or plug. I will update as needed to give all the info requested.
$2100 shipped, $2000 picked up.
http://i48.tinypic.com/2hs3g44.jpg