View Full Version : What all do i need?
crazeddriver
02-22-2004, 01:19 PM
Ok i know that this has been posted ALOT of times but i was having trouble trying to find out what i needed so here it goes.
I have found a j30 at the junk yard. I know that it isn't a direct bolt in to the s13(thats what i got) but what do i need to get it in there? Also i heard that the 96 and up don't need any modification it just drops right in there?
Ghettokracker71
02-22-2004, 01:20 PM
What year is the J30? What year is yo' junk....I assume its an S13
crazeddriver
02-22-2004, 02:44 PM
i didn't catch what year the j30 was and mine is a 91
Ghettokracker71
02-22-2004, 03:43 PM
i didn't catch what year the j30 was and mine is a 91
well,that can be pretty important....the year of the J30 that is
ryan hagen
02-22-2004, 10:24 PM
for the earlier j30's u just swap the rear cover and use the j30 c/v's
i used a 300zx diff which is almsot identicale to a j30 and swaped the rear cover and used j30 c/vs and i was fine, you ll need to use somekinda spacer or washers to put on the front carrier bolts cause they mount witha bushing on z's and s14's and i think j30's also
check
www.lakesidep.tk and go to how toos i did one on putting my diff in and what i used for spacers etc.
Ghettokracker71
02-23-2004, 09:51 AM
for the earlier j30's u just swap the rear cover and use the j30 c/v's
i used a 300zx diff which is almsot identicale to a j30 and swaped the rear cover and used j30 c/vs and i was fine, you ll need to use somekinda spacer or washers to put on the front carrier bolts cause they mount witha bushing on z's and s14's and i think j30's also
check
www.lakesidep.tk and go to how toos i did one on putting my diff in and what i used for spacers etc.
wow I'm lost.....lol....I wish somebody made LSD bolt-on kits,you tell them what LSD you have,they give you a kit(like LSD oil,bolts,rear diff gasket,diff cover,tell you what output shafts you need...or you can buy them for $xx more)
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.