PDA

View Full Version : FL Turbo part out and KA part out


SMM
07-11-2012, 02:06 AM
Low ballers galore, wasting my time.

HanzdeFuko
07-11-2012, 03:12 AM
Interested in manifold and wideband!! Hit me up

240Chance
07-11-2012, 03:35 AM
im want the wideband.

psychos13
07-11-2012, 04:01 AM
Legit stuff bump

anti tyler
07-11-2012, 05:59 AM
you would have the ECU that I need. what piston size is the ECU tuned for?

jay d emm
07-11-2012, 06:08 AM
how much for the head shipped to 08053????? i needs that

KendallH
07-11-2012, 07:09 AM
I want the wideband and I'm local

kabukie
07-11-2012, 08:07 AM
S13 ECU to S14 engine harness conversion

Self made or bought from a Vendor?

-4 braided oil line 64" long and adapter to tap into factory oil port retains factory oil sending sensor and adds 2 ports has -4 fitting in one port

Pics of this?

SMM
07-11-2012, 11:40 AM
you would have the ECU that I need. what piston size is the ECU tuned for?

Stock motor.

SMM
07-11-2012, 11:46 AM
Self made or bought from a Vendor?



Pics of this?

Bought from a member. Came from Enthalpy. Used on my car no problems, a/c works too.

You can see the fitting in the picture next to the blue a/n fittings. Threads right into the bspt port, then allows stock sensor to screw onto the end with the two accessory ports on the side. The line is straight on one side 90 degree on the other. Paid 35 for the line and 30 for the adapter and 6 for an fitting. $45 shipped will snag a pic later.

SMM
07-11-2012, 11:47 AM
Guys PM me if you really want something. Once paid I will get it out next day priority!

dr10
07-11-2012, 12:26 PM
good stuff here guys

kabukie
07-11-2012, 05:01 PM
Bought from a member. Came from Enthalpy. Used on my car no problems, a/c works too.

You can see the fitting in the picture next to the blue a/n fittings. Threads right into the bspt port, then allows stock sensor to screw onto the end with the two accessory ports on the side. The line is straight on one side 90 degree on the other. Paid 35 for the line and 30 for the adapter and 6 for an fitting. $45 shipped will snag a pic later.


You have been PM'ed. Thanks.

mgramata
07-11-2012, 06:30 PM
Damn. That's a good deal for a dope manifold. I paid 300 for mine, GLWS bro!

SMM
07-12-2012, 12:09 PM
Wow is everyone on here cheap. Don't PM me offering 20 percent of what the part is worth.

s14sidewaysallday
07-12-2012, 12:32 PM
im interested in the turbo wud u take $500

s14sidewaysallday
07-12-2012, 12:32 PM
also the wastegate wud u work a deal for both turbo and wastegate?

SMM
07-12-2012, 12:42 PM
Sorry not budging on those parts. Broke down the turbo above, easily worth 6. That was not even including the core chare for the turbo. Turbo makes stupid power and spools crazy fast.


Waste gate was purchased new and only has a few hundred miles, worth every penny of $150.

alixander2010
07-12-2012, 12:54 PM
Pm sent about aem wideband

waxball88
07-12-2012, 03:25 PM
Part rods? Pm me?

Jaliscano
07-12-2012, 04:18 PM
Pm'd you, let me know if we have a deal for wideband and ecu.....

s14sidewaysallday
08-02-2012, 06:06 PM
is the turbo still available for $600 email me plz [email protected]