vqswap 350z parts ECU Pedal Homelink vq35de

[Guilty1s]

Have a few parts here i aquired extra in my current VQ swap.

I have a better itrader on my350z.

First. Have an extra 2 gas pedals with pigtails on them. The one with the extra heal toe is one i am keeping but i have 3rd unpictured that i can sell.
$70 shipped each

Next is an ECU from an 03 350Z 6speed MT performance. It will work for any usual trim of 03 6speed. It will work on early 04s also. In 04.5 they switched to wideband sensor in the Bank 0 positions. You need the ECU that goes with your harness. Easiest way to tell is your 02 sensor plugs. The <04.5 have 5 wire rectangle plugs that are different then then the usual plugs you find on the harness. the 03-04 o2 sensor plugs are 4 wire and like the rest of them.
Code: PC
Model #: mec31-511
If you put this into another Z, it will have to be programed by a dealer
If you are using this for a swap, it needs to be flashed to bypass NATs system
$150 shipped
$350 more i can have it flashed for you to remove nats. Cheaper then the usual 500-600.

Homelink mirrors.. they are both from Zs, just different years. Yes you can find the cheaper on ebay, but they are either not for a Z (even though they say they are) and wire in differently or they don't come with the pigtails to wire in. They are easy to wire in. Hot, ground, signal, done. I already upgraded my base Z with one and love it. If these dont sell, it will be in my 240. All you would need for that is the window adhessive and metal base of any car that uses them and your good to go in a 240. I took one off a maxima for my 240. One has wear on the rubber button. One does not.
70 shipped for worn one.
sold shipped for not worn one.
*neather come with radar detector mount attached in picture.

Shorty antenna for free with anything someone buys. Dont know which one it is but it fits a Z. Wont fit a 240.

Headlight ballast for 350z headlights. Works with all years. Has a broken tab. 20 bucks plus shipping.

http://i890.photobucket.com/albums/ac103/Guilty1s/Untitled.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/3624ea89.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/e84e6e53.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/08cb2d74.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/b97e68eb.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/a05c1289.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/546faf0b.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/b1bb76f2.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/0a878fe9.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/579f9a34.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/e769fe3a.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/fb3f3123.jpg
http://i890.photobucket.com/albums/ac103/Guilty1s/54df5008.jpg

[gosai_240sx]

Hey i need a reflash for my swap, pm plz

[Guilty1s]

Unworn Mirror sold.

Gosal... anyone who is an Authorized Osirus dealer could probally do your ecu.

Also have a whole bunch of extra motor parts for a long block I got shafted on.

Complete heads. They are just dirty and would need a valve job done anyways.

Have a block/crank too that I'd like to go together. Would have to be bored probably .02 over due to scar on cylinder wall from a broken ring land and about .0003 ??? out of roundness.

A lot of other small parts.

This would make the perfect setup for someone that wants to build their VQ and just swap when ready.

[gosai_240sx]

okay tahnx, got any maf housings avalible?

[N2HIFI]

interested in one of the pedals with a pigtail, still available