Prove It
07-09-2012, 11:16 AM
Hey guys,
For sale is my engine harness I just got from Chase Bays. It is for a 1JZ-GTE into an s13 (91-93). Going to clarify again that this harness was made for duel cam 240sx. I believe the interior plugs do differ from single cam. Regardless, I waited a little over 2 months for this harness and then after receiving it to find out that almost every clip on my 1JZ is broken. Literally 7 different clips! =( to get 2 new knock sensors, 2 cam angle sensors, alternator, o2 sensor, and IAT sensors would be a outrageous amount of money. I was still going to push through with it till the other day my friend decided to sell his full LS swap. SO now i am going to attempt to part out most of my 1jz parts to get this LS swap. The harness is brand new, and all i have done is plug everything in on my motor. I did though however have to extend the starter signal wire because it would not reach. Other than that you will be receiving the harness as if it was new.
You will also need to know that i asked for Chase Bays to not wire the harness for reverse lights, Speed sensor, and no water temp reading on the cluster, as well as the oil pressure for cluster reading. I planned to run all aftermarket gauges. Lastly, i figured this out after i got the harness, but you have to run a 2JZ-GTE ecu on all of their JZ harnesses. Yes it is a 1JZ harness, yes a 2JZ ecu will work.
Now that you know why i am selling and everything you need to know about the harness it leads me to what i am looking to get. Price is$600 shipped. Wait time on this harness is 2+ months, price paid was 780 as shown in the invoice. DO NOT OFFER ME ANY LESS, you will be wasting both your time and mine. Save yourself the wait and buy now! I can take more pictures upon request. I am now accepting trades for the following items!
- pair of xxr 527 17x8.25 4 lug + cash
- spl s13 outer tie rod ends + cash
- any brAnd wideband + cash
- Skikky swaybar + cash
- any 5x114.3 18" set of wheels. Example battles/rotas/xxr
- Mega Squirt MS3 + cash
Thanks for looking,
Greg Jones
561.596.1782
or PM
Pictures:
http://i56.photobucket.com/albums/g195/liquidforce5590/SAM_0351.jpg
http://i56.photobucket.com/albums/g195/liquidforce5590/chasebayinvoivw.jpg
For sale is my engine harness I just got from Chase Bays. It is for a 1JZ-GTE into an s13 (91-93). Going to clarify again that this harness was made for duel cam 240sx. I believe the interior plugs do differ from single cam. Regardless, I waited a little over 2 months for this harness and then after receiving it to find out that almost every clip on my 1JZ is broken. Literally 7 different clips! =( to get 2 new knock sensors, 2 cam angle sensors, alternator, o2 sensor, and IAT sensors would be a outrageous amount of money. I was still going to push through with it till the other day my friend decided to sell his full LS swap. SO now i am going to attempt to part out most of my 1jz parts to get this LS swap. The harness is brand new, and all i have done is plug everything in on my motor. I did though however have to extend the starter signal wire because it would not reach. Other than that you will be receiving the harness as if it was new.
You will also need to know that i asked for Chase Bays to not wire the harness for reverse lights, Speed sensor, and no water temp reading on the cluster, as well as the oil pressure for cluster reading. I planned to run all aftermarket gauges. Lastly, i figured this out after i got the harness, but you have to run a 2JZ-GTE ecu on all of their JZ harnesses. Yes it is a 1JZ harness, yes a 2JZ ecu will work.
Now that you know why i am selling and everything you need to know about the harness it leads me to what i am looking to get. Price is$600 shipped. Wait time on this harness is 2+ months, price paid was 780 as shown in the invoice. DO NOT OFFER ME ANY LESS, you will be wasting both your time and mine. Save yourself the wait and buy now! I can take more pictures upon request. I am now accepting trades for the following items!
- pair of xxr 527 17x8.25 4 lug + cash
- spl s13 outer tie rod ends + cash
- any brAnd wideband + cash
- Skikky swaybar + cash
- any 5x114.3 18" set of wheels. Example battles/rotas/xxr
- Mega Squirt MS3 + cash
Thanks for looking,
Greg Jones
561.596.1782
or PM
Pictures:
http://i56.photobucket.com/albums/g195/liquidforce5590/SAM_0351.jpg
http://i56.photobucket.com/albums/g195/liquidforce5590/chasebayinvoivw.jpg