tapdeznutz
07-09-2012, 09:44 AM
Getting right down to business. Everything is obo so offer up. More pictures are on my photobucket, same name. Text me at 562.522.9340 thanks for looking.
Apexi N1 Pro Coilovers for S13. Rear springs show a number of 1F05 and fronts show 3k07 which i will assume means 7k and 5k spring rates. I am just guessing. only used for a few thousand miles. car sat for a while with these on. just changed out to another set of coilovers so these are up for sale. I do not have the wrenches but they are available thru Apexi for like $25 or so. $900obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3964.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3965.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3967.jpg
have a pair of 16" steelies from nissan altima with oem(bad) tires. it is 5 lug, i was going to use them as ful size spares but picked up another spare. $30 obo
KA24E valve cover...I purchased this spare one to clean up and installed onto my engine. Now i have one for sale. $10
S13 auto front auto seat belt sets, drivers and passengers. i have all the belts and controller etc. let me know if you need any of it. $20 each set.
S13 lighten oem flywheel. It will need to be resurfaced. i purchased it on zilvia a few months ago but have not needed a clutch job just yet. i will try to get access to a scale oem flywheel weighed in approx. 21lbs and the lightened one i have to check. $80
S13 hatch Tail lights...center and right side very clean, left has a small blemish. $20 each, specify which side you need.
ka24E Stock Cam. purchased it and was going to sent it out as a core to O&J but just not ready for it right now. $25
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3959.jpg
S13 stock rear top hats. $20 pair
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3955.jpg
s13 rear toni blue struts still very good condition. nice and tight. you can feel how tight they are if you like. i removed the spring off of it already. also comes with hats and misc hardware. $40pair.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3962.jpg
"3D" ECU i forget which S14 goes to but all i remember is came from a obdI car. did some research and found out that is edu is for S14 '95 auto. just in case that helps anyone. $25
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3949.jpg
SR SMIC with hard to find scoop. Scoop has cracks on both sides but still functional. it does not have the stock bov but does come with the pipes you see in the picture. $25
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3602-1.jpg
Pignose front turn signals. Right hand side lens a bit of a crack. Does not come with harness. $20 for pair.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3914.jpg
320cc High imped top feed injectors. Drop in for KA24E DIY Turbo. I have test fitted these and they fit into stock fuel rail just like the stock injectors do. $60
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3924.jpg
Stock passenger S13 front seat. Good condition with small cigarette burn. $20.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3940.jpg
'06 G35 drivers seat w/o headrest. i was modding the rails to install into my s13 hatch but it sits too high on stock rails. May be a great mod for aftermarket seat rails but not stock. So in other words I already drilled out the mounting tabs on the seat rails. Still in great condition, leather is still very soft and side air bad still intact. $70 obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3636.jpg
S13 front adjustable top hats/camber plates. SOLD to pallnet...thx
Shift boots made out of Naugahyde leather. You can see the size difference from the stock S13 boot. ALL SOLD THANKS
Apexi N1 Pro Coilovers for S13. Rear springs show a number of 1F05 and fronts show 3k07 which i will assume means 7k and 5k spring rates. I am just guessing. only used for a few thousand miles. car sat for a while with these on. just changed out to another set of coilovers so these are up for sale. I do not have the wrenches but they are available thru Apexi for like $25 or so. $900obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3964.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3965.jpg
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3967.jpg
have a pair of 16" steelies from nissan altima with oem(bad) tires. it is 5 lug, i was going to use them as ful size spares but picked up another spare. $30 obo
KA24E valve cover...I purchased this spare one to clean up and installed onto my engine. Now i have one for sale. $10
S13 auto front auto seat belt sets, drivers and passengers. i have all the belts and controller etc. let me know if you need any of it. $20 each set.
S13 lighten oem flywheel. It will need to be resurfaced. i purchased it on zilvia a few months ago but have not needed a clutch job just yet. i will try to get access to a scale oem flywheel weighed in approx. 21lbs and the lightened one i have to check. $80
S13 hatch Tail lights...center and right side very clean, left has a small blemish. $20 each, specify which side you need.
ka24E Stock Cam. purchased it and was going to sent it out as a core to O&J but just not ready for it right now. $25
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3959.jpg
S13 stock rear top hats. $20 pair
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3955.jpg
s13 rear toni blue struts still very good condition. nice and tight. you can feel how tight they are if you like. i removed the spring off of it already. also comes with hats and misc hardware. $40pair.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3962.jpg
"3D" ECU i forget which S14 goes to but all i remember is came from a obdI car. did some research and found out that is edu is for S14 '95 auto. just in case that helps anyone. $25
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3949.jpg
SR SMIC with hard to find scoop. Scoop has cracks on both sides but still functional. it does not have the stock bov but does come with the pipes you see in the picture. $25
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3602-1.jpg
Pignose front turn signals. Right hand side lens a bit of a crack. Does not come with harness. $20 for pair.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3914.jpg
320cc High imped top feed injectors. Drop in for KA24E DIY Turbo. I have test fitted these and they fit into stock fuel rail just like the stock injectors do. $60
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3924.jpg
Stock passenger S13 front seat. Good condition with small cigarette burn. $20.
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3940.jpg
'06 G35 drivers seat w/o headrest. i was modding the rails to install into my s13 hatch but it sits too high on stock rails. May be a great mod for aftermarket seat rails but not stock. So in other words I already drilled out the mounting tabs on the seat rails. Still in great condition, leather is still very soft and side air bad still intact. $70 obo
http://i1174.photobucket.com/albums/r608/tapdeznutz/100_3636.jpg
S13 front adjustable top hats/camber plates. SOLD to pallnet...thx
Shift boots made out of Naugahyde leather. You can see the size difference from the stock S13 boot. ALL SOLD THANKS