weirdchris555
07-05-2012, 08:05 PM
Following items are located in NY. Prices are not including shipping. If interested, pm me with your preferred method of shipping, ie tracking number, insurance etc. I will not be responsible for issues with postal services. All sales are final.
Now that the above is said, I have two (2) #62 Redtop Manual ECU’s.
The first ECU was sent out to a member on Zilvia for the Nistune daughterboard to be installed. Upon return it seemed to work, but then kept failing at random intervals even while driving. I eventually tried to put it back to read off the stock maps and it still failed. I am by no means a good electrical person, but my opinion is there is something wrong with the jumper on either CJ1 to CJ2. Someone with a good electrical background could probably figure this out. Looking for $20+shipping to be determined.
The second ECU was purchased from a Zilvia member. This ECU at some point in its lifetime was fitted with a daughterboard, since there are pins installed in it. The pins are in rough condition though, so it would need someone with an electrical background to replace the pins if a daughterboard would be installed. As it sits though, this ECU runs perfectly fine off the stock maps. I was using this ECU while waiting for a third ECU of mine to get set up for Nistune. Now that I have that ECU I do not need ECU number 2. Looking for $70+ shipping to be determined.
http://i255.photobucket.com/albums/hh129/weirdchris555/2012-07-05214635.jpg
Also have a hydraulic Ebrake handle/mount for sale. The cylinder is toast though, needs to be replaced. Let it go for $30+shipping
http://i255.photobucket.com/albums/hh129/weirdchris555/2012-07-05214651.jpg
Now that the above is said, I have two (2) #62 Redtop Manual ECU’s.
The first ECU was sent out to a member on Zilvia for the Nistune daughterboard to be installed. Upon return it seemed to work, but then kept failing at random intervals even while driving. I eventually tried to put it back to read off the stock maps and it still failed. I am by no means a good electrical person, but my opinion is there is something wrong with the jumper on either CJ1 to CJ2. Someone with a good electrical background could probably figure this out. Looking for $20+shipping to be determined.
The second ECU was purchased from a Zilvia member. This ECU at some point in its lifetime was fitted with a daughterboard, since there are pins installed in it. The pins are in rough condition though, so it would need someone with an electrical background to replace the pins if a daughterboard would be installed. As it sits though, this ECU runs perfectly fine off the stock maps. I was using this ECU while waiting for a third ECU of mine to get set up for Nistune. Now that I have that ECU I do not need ECU number 2. Looking for $70+ shipping to be determined.
http://i255.photobucket.com/albums/hh129/weirdchris555/2012-07-05214635.jpg
Also have a hydraulic Ebrake handle/mount for sale. The cylinder is toast though, needs to be replaced. Let it go for $30+shipping
http://i255.photobucket.com/albums/hh129/weirdchris555/2012-07-05214651.jpg