waste_of_space
07-05-2012, 06:59 PM
Going to finally start cleaning up my garage and clearing space out, so here's a small start to some of the parts I have.
First up: S13 SR (redtop) The lines/condensor say "R134A" if anyone can clarify why (unless it was s15 stuff, but the compressor says r12)
SR AC compressor, compressor bracket, condensor, and both AC compressor lines. Compressor spins freely/doesn't make any weird noises.
Here's a link to CodyAce's stuff if you want AC in your SR 240! (also has info explaining different compressors/brackets)
Purchasing CodyAce SR20 Air Conditioning Bracket (http://www.sr20acbrackets.com/purchase.html)
$150 shipped
http://i49.tinypic.com/200cwpc.jpg
http://i49.tinypic.com/11hxcb8.jpg
http://i49.tinypic.com/2wpuypj.jpg
^ also inbetween the AC stuff is a DIF steel braided line (looks like the newer DIF lines have heat shielding)
It's not an auto manual conversion line, it's just a the stock clutch damper bypass line. Slave has surface rust, but is still 100% functional. I put a 2j in my coupe so I had to remove it lol.
$25 shipped for the slave/line combo.
Next is a custom catch can that I bought awhile ago here on Zilvia. Uses -10 lines, so you would need -10 bungs welded onto your valve cover. Bolts up to the passenger side shock tower.
$50 shipped.
http://i48.tinypic.com/2vc6bs8.jpg
Also in that picture is a front half 2jz mechanical water pump. It's brand new/unopened, came from drift motion.
Welcome to Driftmotion! (http://store.driftmotion.com/static/i-2jz-gewaterpump.php)
$50 shipped for the pump.
Next is a Wiring Specialties lower harness. Ran it for less than a month, has an "upgraded" alternator connector (since I was running a Quest alternator on my SR)
$80 shipped (note, this was for an S13 SR into an S13)
http://i48.tinypic.com/vdz49v.jpg
Also have a full set of rear battle version arms (traction/toe/RUCAs)
Came off of a Kouki S14, daily driven on, not abused.
$425 shipped for these, though I may end up using them on my coupe.
http://i47.tinypic.com/1183dpz.jpg (http://i47.tinypic.com/1183dpz.jpg)
This is a sort of consolidation of my older FS threads.
http://i40.tinypic.com/bdljpk.jpg (http://i40.tinypic.com/bdljpk.jpg)
Used HKS cam gears: $250 (retail is $351 from enjuku)
SR tubular manifold: $100 not sure of brand, looks like yashio factory one with no cracks. Worked fine, I swapped it out to go external gate.
Looking to sell or possibly trade (for other useful tools) my ATC500 1/2" air impact. Have owned it for a little over a year.
It's used, but has a shiny boot on it. One side of the boot doesn't say snap on because the lettering didn't like brake parts cleaner haha. Selling it only because I have a more powerful matco air impact I normally use, and an cordless snap on impact I also use, so now I have no use for this and it's just taking up space in my box. Good for up to 525 ft. lbs of torque.
Here's a link to snap on's site with all the info on it.
ATC500, Impact Wrench, Heavy Duty, Composite Rear Housing, 1/2" drive (http://buy1.snapon.com/catalog/item.asp?P65=yes&tool=power&item_ID=644707&group_ID=675927&store=snapon-store&dir=catalog)
http://i2.photobucket.com/albums/y9/blacklight0303/photo-1.jpg (http://i2.photobucket.com/albums/y9/blacklight0303/photo-1.jpg)
http://i2.photobucket.com/albums/y9/blacklight0303/photo-2.jpg (http://i2.photobucket.com/albums/y9/blacklight0303/photo-2.jpg)
Looking to get $180
And I have a barely used (~75 miles) JGY top feed fuel rail for an S13 SR, will work with stock or greddy/greddy style plenums. Also it's designed to use an OEM style FPR.
$120
Selling a set of brand new/still wrapped in plastic ACL duraglide rod bearings for SR20DE or T. Bought them from FRSport about two weeks ago, but when they came in I realized my SR had GTiR rods in it (which utilize a 19mm bearing instead of 17mm like normal SR rods)
Looking to get $45 for them (which is slightly less, plus no shipping costs from cali). I'll get pics up when I get home from work, but for now, here's a link to the bearings directly from FRS.
Also, these are standard sized bearings!
http://www.frsport.com/ACL-4B2960-Du...T_p_12472.html (http://www.frsport.com/ACL-4B2960-Duraglide-Rod-Bearing-Set-Nissan-SR20DE-SR20DET_p_12472.html)
http://i1.frsimg.com/images/detailed_images/ACL_4B2960-STD_0112466618754a4e8cf38ed7e.jpg (http://i1.frsimg.com/images/detailed_images/ACL_4B2960-STD_0112466618754a4e8cf38ed7e.jpg)
First up: S13 SR (redtop) The lines/condensor say "R134A" if anyone can clarify why (unless it was s15 stuff, but the compressor says r12)
SR AC compressor, compressor bracket, condensor, and both AC compressor lines. Compressor spins freely/doesn't make any weird noises.
Here's a link to CodyAce's stuff if you want AC in your SR 240! (also has info explaining different compressors/brackets)
Purchasing CodyAce SR20 Air Conditioning Bracket (http://www.sr20acbrackets.com/purchase.html)
$150 shipped
http://i49.tinypic.com/200cwpc.jpg
http://i49.tinypic.com/11hxcb8.jpg
http://i49.tinypic.com/2wpuypj.jpg
^ also inbetween the AC stuff is a DIF steel braided line (looks like the newer DIF lines have heat shielding)
It's not an auto manual conversion line, it's just a the stock clutch damper bypass line. Slave has surface rust, but is still 100% functional. I put a 2j in my coupe so I had to remove it lol.
$25 shipped for the slave/line combo.
Next is a custom catch can that I bought awhile ago here on Zilvia. Uses -10 lines, so you would need -10 bungs welded onto your valve cover. Bolts up to the passenger side shock tower.
$50 shipped.
http://i48.tinypic.com/2vc6bs8.jpg
Also in that picture is a front half 2jz mechanical water pump. It's brand new/unopened, came from drift motion.
Welcome to Driftmotion! (http://store.driftmotion.com/static/i-2jz-gewaterpump.php)
$50 shipped for the pump.
Next is a Wiring Specialties lower harness. Ran it for less than a month, has an "upgraded" alternator connector (since I was running a Quest alternator on my SR)
$80 shipped (note, this was for an S13 SR into an S13)
http://i48.tinypic.com/vdz49v.jpg
Also have a full set of rear battle version arms (traction/toe/RUCAs)
Came off of a Kouki S14, daily driven on, not abused.
$425 shipped for these, though I may end up using them on my coupe.
http://i47.tinypic.com/1183dpz.jpg (http://i47.tinypic.com/1183dpz.jpg)
This is a sort of consolidation of my older FS threads.
http://i40.tinypic.com/bdljpk.jpg (http://i40.tinypic.com/bdljpk.jpg)
Used HKS cam gears: $250 (retail is $351 from enjuku)
SR tubular manifold: $100 not sure of brand, looks like yashio factory one with no cracks. Worked fine, I swapped it out to go external gate.
Looking to sell or possibly trade (for other useful tools) my ATC500 1/2" air impact. Have owned it for a little over a year.
It's used, but has a shiny boot on it. One side of the boot doesn't say snap on because the lettering didn't like brake parts cleaner haha. Selling it only because I have a more powerful matco air impact I normally use, and an cordless snap on impact I also use, so now I have no use for this and it's just taking up space in my box. Good for up to 525 ft. lbs of torque.
Here's a link to snap on's site with all the info on it.
ATC500, Impact Wrench, Heavy Duty, Composite Rear Housing, 1/2" drive (http://buy1.snapon.com/catalog/item.asp?P65=yes&tool=power&item_ID=644707&group_ID=675927&store=snapon-store&dir=catalog)
http://i2.photobucket.com/albums/y9/blacklight0303/photo-1.jpg (http://i2.photobucket.com/albums/y9/blacklight0303/photo-1.jpg)
http://i2.photobucket.com/albums/y9/blacklight0303/photo-2.jpg (http://i2.photobucket.com/albums/y9/blacklight0303/photo-2.jpg)
Looking to get $180
And I have a barely used (~75 miles) JGY top feed fuel rail for an S13 SR, will work with stock or greddy/greddy style plenums. Also it's designed to use an OEM style FPR.
$120
Selling a set of brand new/still wrapped in plastic ACL duraglide rod bearings for SR20DE or T. Bought them from FRSport about two weeks ago, but when they came in I realized my SR had GTiR rods in it (which utilize a 19mm bearing instead of 17mm like normal SR rods)
Looking to get $45 for them (which is slightly less, plus no shipping costs from cali). I'll get pics up when I get home from work, but for now, here's a link to the bearings directly from FRS.
Also, these are standard sized bearings!
http://www.frsport.com/ACL-4B2960-Du...T_p_12472.html (http://www.frsport.com/ACL-4B2960-Duraglide-Rod-Bearing-Set-Nissan-SR20DE-SR20DET_p_12472.html)
http://i1.frsimg.com/images/detailed_images/ACL_4B2960-STD_0112466618754a4e8cf38ed7e.jpg (http://i1.frsimg.com/images/detailed_images/ACL_4B2960-STD_0112466618754a4e8cf38ed7e.jpg)