Neeed hep! Wire diagram for 93 240sx maf plug

[rwake15]

I have searched and searched for it can find anything. Here's my problem I bought my 93 240 put my build ka in it and threw the z32 maf for my s14 on it. Didn't realize or think about it but it has different fuel map. Its making my car run supper rich and it will not idle. runs great just wont idle. When I bought the car the plug for the maf sensor was gone. So i had to hard wire it but i need to put the original maf back in so i need to know what wire go's to what plug? but this is no where!!!! If anybody can help it woiuld be awsome thankyou!

[wrxstiswap]

On top the maf, the plug is labeled a,b,c,d. Use a multi meter but one is 12v one should be about .5 and lasty the ground. Also here is a chart that should help. http://jimwolftechnology.com/wolfpdf/MAF%20Z32%20CONVERT%20TO%20OTHER%20NISSANS.PDF
good luck

[rwake15]

ok Thanks man that helps a little i am going to try to figure something out cuz im going to the club fr event this weekend!

[budderigs]

almost all nissan mafs are wired the same. it is more or less a matter of how you look at them. hold the new plug above them old plug and move the wires over one at a time.


or use this. and work backwards....

http://zilvia.net/f/archive-faqs/97556-z32-maf-install-sr20det-pics.html

this pdf about halfway down is even better.

http://www.zfever.com/v1/Other-Technical-Data/View-category.html

[rwake15]

your guys info is great but i need like a pick of what wire goes to the 1-4 terminals on the maf. I do not have a plug to use.